Pepperl Fuchs NBB2-8GM40-E2-0.2M-V1 Data Sheet

Inductive sensor NBB2-8GM40-E2-0,2M-V1
Technical Data
General specifications
Switching function Normally open (NO) Output type PNP Rated operating distance sn2 mm Installation flush Output polarity DC
Model Number
NBB2-8GM40-E2-0,2M-V1
Features
• Extended Range
•3-wire DC
Accessories
BF 8
Mounting flange, 8 mm
EXG-08
Quick mounting bracket with dead stop
V1-G-2M-PVC
Female cordset, M12, 4-pin, PVC cable
Assured operating distance s Reduction factor rAl 0.45 Reduction factor r Reduction factor r Output type 3-wire
Nominal ratings
Operating voltage UB10 ... 30 V Switching frequency f 0 ... 1500 Hz Hysteresis H typ. 5 % Reverse polarity protection reverse polarity protected Short-circuit protection pulsing Voltage drop Ud≤ 3 V Operating current I Off-state current I No-load supply current I Time delay before availability t Switching state indicator LED, yellow
Functional safety related parameters
MTTFd 2790 a Mission Time (TM) 20 a Diagnostic Coverage (DC) 0 %
Standard conformity
Standards IEC / EN 60947-5-2:2004
Ambient conditions
Ambient temperature -25 ... 70 °C (-13 ... 158 °F)
Mechanical specifications
Connection type Connector M12 x 1 , 4-pin with PVC cable 200 mm Core cross-section 0.14 mm Housing material brass, nickel-plated Sensing face LCP Degree of protection IP67
Approvals and certificates
UL approval cULus Listed, General Purpose CSA approval cCSAus Listed, General Purpose CCC approval CCC approval / marking not required for products rated 36 V
0.4
Cu
0.75
304
Dimensions
0 ... 1.62 mm
a
0 ... 100 mA
L
0 ... 0.5 mA typ. 0.1 µA
r
15 mA
0
< 5 ms
v
2
Release date: 2017-10-06 09:55 Date of issue: 2017-10-06 906140_eng.xml
Refer to “General Notes Relating to Pepperl+Fuchs Product Information”.
M8 x 1
40 200
4
13
1
Inductive sensor NBB2-8GM40-E2-0,2M-V1
Electrical Connection
Pinout
1
4
3
L+
L-
1
2
4
3
Release date: 2017-10-06 09:55 Date of issue: 2017-10-06 906140_eng.xml
Refer to “General Notes Relating to Pepperl+Fuchs Product Information”.
2
Loading...