
Inductive sensor NBB1,5-5GM25-E2-V3
Technical Data
General specifications
Switching element function PNP NO
Model Number
NBB1,5-5GM25-E2-V3
Features
•Basic series
•1.5 mm flush
Accessories
BF 5
Mounting flange, 5 mm
V3-WM
Female connector, M8, 3-pin, field attachable
V3-GM
Female connector, M8, 3-pin, field attachable
V3-WM-2M-PUR
Cable socket, M8, 3-pin, PUR cable
Rated operating distance s
Installation flush
Output polarity DC
Assured operating distance sa0 ... 1.215 mm
Actuating element 5 mm x 5 mm x 1 mm
Reduction factor rAl 0.41
Reduction factor r
Reduction factor r
Reduction factor r
Nominal ratings
Operating voltage UB10 ... 30 V
Switching frequency f 0 ... 3000 Hz
Hysteresis H 1 ... 15 %
Reverse polarity protection reverse polarity protected
Short-circuit protection pulsing
Vol tag e d rop Ud≤ 3 V
Operating current I
Off-state current I
No-load supply current I
Switching state indicator LED, yellow
Functional safety related parameters
MTTFd 1245 a
Mission Time (T
Diagnostic Coverage (DC) 0 %
Ambient conditions
Ambient temperature -25 ... 70 °C (-13 ... 158 °F)
Mechanical specifications
Connection type Connector M8 x 1 , 3-pin
Housing material Stainless steel 1.4305 / AISI 303
Sensing face POM
Degree of protection IP67
Compliance with standards and directives
Stan dard conf ormit y
Sta ndar ds
Approvals and certificates
UL approval cULus Listed, General Purpose
CSA approval cCSAus Listed, General Purpose
CCC approval CCC approval / marking not required for products rated ≤36 V
0.38
Cu
0.85
304
0.54
Brass
) 20 a
M
Dimensions
1.5 mm
n
0 ... 200 mA
L
0 ... 0.1 mA typ. 0.1 µA at 25 °C
r
≤ 10 mA
0
EN 60947-5-2:2007
IEC 60947-5-2:2007
Electrical Connection
1
4
3
LED
2.7
M5 x 0.5
8
22.5
26.4
38
M8 x 1
L+
L-
Release date: 2015-12-14 13:01 Date of issue: 2015-12-14 204745_eng.xml
Refer to “General Notes Relating to Pepperl+Fuchs Product Information”.
1

Inductive sensor NBB1,5-5GM25-E2-V3
Pinout
4
13
Wire colors in accordance with EN 60947-5-2
1 BN
3 BU
4 BK
(brown)
(blue)
(black)
Release date: 2015-12-14 13:01 Date of issue: 2015-12-14 204745_eng.xml
Refer to “General Notes Relating to Pepperl+Fuchs Product Information”.
2