Pepperl Fuchs NBB1-3M22-E0 Data Sheet

		Inductive sensor	NBB1-3M22-E0

Model Number

NBB1-3M22-E0

Features

•1 mm flush

•Miniature design

<![if ! IE]>

<![endif]>Release date: 2015-02-18 13:52 Date of issue: 2015-02-18 206382_eng.xml

Refer to “General Notes Relating to Pepperl+Fuchs Product Information”.

Technical Data

General specifications		NPN	NO
Switching element function	sn
Rated operating distance		1 mm
Installation		flush
Output polarity	sa	DC
Assured operating distance		0 ... 0.81 mm
Reduction factor rAl		0.4
Reduction factor rCu		0.29
Reduction factor r304		0.76
Reduction factor rBrass		0.46
Nominal ratings	UB	10 ... 30 V
Operating voltage
Switching frequency	f	0 ... 700 Hz
Hysteresis	H	typ. 5%
Reverse polarity protection		reverse polarity protected
Short-circuit protection	Ud	pulsing
Voltage drop		≤ 3 V
Operating current	IL	0 ... 100 mA
Off-state current	Ir	0 ... 0.1 mA typ. at 25 °C
No-load supply current	I0	≤ 10 mA
Switching state indicator		LED, yellow
Ambient conditions		-25 ... 70 °C (-13 ... 158 °F)
Ambient temperature
Mechanical specifications		cable PVC , 2 m
Connection type
Core cross-section		0.055 mm2
Housing material		Stainless steel 1.4305 / AISI 303
Sensing face		PC
Degree of protection		IP67
Compliance with standards and directives
Standard conformity		EN 60947-5-2:2007
Standards
Approvals and certificates		IEC 60947-5-2:2007
UL approval		cULus Listed, General Purpose
CSA approval		cCSAus Listed, General Purpose
CCC approval		CCC approval / marking not required for products rated ≤36 V

Dimensions

Ø 3

<![if ! IE]>

<![endif]>16 22

LED

Electrical Connection

BN

L+

BK

BU

L-

1

		Inductive sensor	NBB1-3M22-E0

max. 0.16 Nm	8 ... 20
	M3

<![if ! IE]>

<![endif]>Release date: 2015-02-18 13:52 Date of issue: 2015-02-18 206382_eng.xml

2Refer to “General Notes Relating to Pepperl+Fuchs Product Information”.