Pepperl+Fuchs IQH1-FP-V1 Technical Data

Read/write head

Ø5.3

M20 x 1.5

80

11

65

65

LED

40

7

16

M12 x 1

Germany: [phone]Pepperl+Fuchs Group

Refer to "General Notes Relating to Pepperl+Fuchs Product Information".

USA: [phone] Singapore: [phone]

www.pepperl-fuchs.com [e-mail] [e-mail]

[e-mail]

IQH1-FP-V1

Operating frequency 13.56 MHz

<

Conforms to ISO 15693

<

Suitable for FRAM transponder

<

Dual-LED for function display

<

Connection via V1 (M12 x 1) plug connection

<

Degree of protection IP67

<

For connection to IDENTControl control interface

<

HF read/write head, ISO 15693, for IDENTControl

Dimensions

Technical Data

General specifications

Operating frequency 13.56 MHz

Transfer rate 26 kBit/s

Sensing range

Read distance 0 ... 130 mm

Write distance 0 ... 130 mm

Width max. 100 mm

UL File Number E87056

Functional safety related parameters

MTTF

d

Mission Time (TM) 10 a

Diagnostic Coverage (DC) 0 %

Indicators/operating means

LED green/yellow green: power on

Electrical specifications

Power consumption P

Release date: 2020-07-30 Date of issue: 2020-07-30 Filename: 204623_eng.pdf

220 a

green flashing: read/write attempt performed
yellow: data carrier detected

≤ 1.3 W

0

1

Shield

+

A

-

B

1

2

3

4

1

42

3

Read/write head IQH1-FP-V1

Germany: [phone]Pepperl+Fuchs Group

Refer to "General Notes Relating to Pepperl+Fuchs Product Information".

USA: [phone] Singapore: [phone]

www.pepperl-fuchs.com [e-mail] [e-mail]

[e-mail]

Technical Data

Supply from the IDENTControl

Directive conformity

Radio equipment

Directive 2014/53/EU EN 301489-1

RoHS

Directive 2011/65/EU (RoHS) EN 50581

Standard conformity

Degree of protection EN 60529

RFID ISO/IEC 15693-2

Approvals and certificates

FCC approval This device complies with part 15 of the FCC rules. Operation is subject to the

Ambient conditions

Ambient temperature -25 ... 70 °C (-13 ... 158 °F)

Storage temperature -40 ... 85 °C (-40 ... 185 °F)

Mechanical specifications

Degree of protection IP67

Connection connector M12 x 1

Material

Housing PBT

Base diecast aluminum

Encapsulation compound CY 221/HY 2966

Installation

Distance between two heads Multiplex on: ≥ 100 mm

Mass approx. 380 g

EN 301489-3
EN 300330
EN 62368-1
EN 50364

ISO/IEC 15693-3
ISO/IEC 18000-3

following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may
cause undesired operation.

Caution:

Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.

Multiplex off: ≥ 150 mm

Connection

Accessories

IC-KP-B6-V15B Control interface unit IDENTControl with PROFIBUS DP interface

IC-KP-B17-AIDA1 IDENTControl control interface with Ethernet interface for TCP/IP, PROFINET, EtherNet/IP, and

Release date: 2020-07-30 Date of issue: 2020-07-30 Filename: 204623_eng.pdf

IC-KP2-2HRX-2V1 Control interface unit IDENTControl Compactwith serial interface RS-232 and RS-485

MODBUS TCP protocols

2

Read/write head IQH1-FP-V1

Germany: [phone]Pepperl+Fuchs Group

Refer to "General Notes Relating to Pepperl+Fuchs Product Information".

USA: [phone] Singapore: [phone]

www.pepperl-fuchs.com [e-mail] [e-mail]

[e-mail]

Accessories

IC-KP2-2HB6-V15B Control interface unit IDENTControl Compact with interface for PROFIBUS DP

IC-KP2-2HB17-2V1D IDENTControl Compact control interface with Ethernet interface for TCP/IP, PROFINET, EtherNet/IP,

and MODBUS TCP protocols

IC-KP2-2HB21-2V1D Control interface unit IDENTControl Compact with EtherCAT interface

IQC21-50F-T10 Data carrier

IQC21-58 Data carrier

IQC22-22-T9 50pcs Data carrier

IQC33-20 50pcs Data carrier

V1-G-2M-PUR-ABG-V1-W Connecting cable, M12 to M12, PUR cable 4-pin, shielded

V1-G-5M-PUR-ABG-V1-W Connecting cable, M12 to M12, PUR cable 4-pin, shielded

V1-G-10M-PUR-ABG-

Connecting cable, M12 to M12, PUR cable 4-pin, shielded

V1-W

IQC33-50 25pcs Data carrier

IQC21-50 25pcs Data carrier

IQC33-30 25pcs Data carrier

IQC21-30 25pcs Data carrier

IQC21-16 50pcs Data carrier

IQC21-10 Data carrier

Release date: 2020-07-30 Date of issue: 2020-07-30 Filename: 204623_eng.pdf

3

Germany: [phone]Pepperl+Fuchs Group

Refer to "General Notes Relating to Pepperl+Fuchs Product Information".

USA: [phone] Singapore: [phone]

www.pepperl-fuchs.com [e-mail] [e-mail]

[e-mail]

Read/write head

IQH1-FP-V1

Safety Information

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated
in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the
interference at his own expense.

Release date: 2020-07-30 Date of issue: 2020-07-30 Filename: 204623_eng.pdf

4