Pepperl+Fuchs INY360D-F99-2I2E2-V17 User Manual

Inclination sensor INY360D-F99-2I2E2-V17
Technical Data
General specifications
Type Inclination sensor, 2-axis Measurement range 0 ... 360 ° Absolute accuracy ± 0.5 ° Response delay 25 ms Resolution 0.1 ° Repeat accuracy ± 0.1 ° Temperature influence 0.027 °/K
Functional safety related parameters
MTTFd 300 a
INY360D-F99-2I2E2-V17
Features
• Measuring range 0 ... 360°
• Analog output 4 mA ... 20 mA
• Evaluation limits can be taught-in
• 2 programmable switch outputs
• High shock resistance
• e1-Type approval
• Increased noise immunity 100 V/m
Electrical connection
Standard symbol/Connection:
1 2
I
4 6 7 5 3 8
+U
B
Out 2 (Y) Out 1 (X) Analogue output Y Analogue output X GND
-U
B
n.c.
Mission Time (T Diagnostic Coverage (DC) 0 %
Indicators/operating means
Operating display LED, green TEACH-IN indication 2 LEDs yellow (switching status), flashing Button 2 push-buttons ( Switch points programming , Evaluation
Switching state 2 yellow LEDs: Switching status (each output)
Electrical specifications
Operating voltage U No-load supply current I Time delay before availability t
Switching output
Output type 2 switch outputs PNP, NO , reverse polarity protected ,
Operating current I Voltage drop 3 V
Analog output
Output type 2 current outputs 4 ... 20 mA
Load resistor 0 ... 200 at UB = 10 ... 18 V
Ambient conditions
Ambient temperature -40 ... 85 °C (-40 ... 185 °F) Storage temperature -40 ... 85 °C (-40 ... 185 °F)
Mechanical specifications
Connection type 8-pin, M12 x 1 connector Housing material PA Protection degree IP68 / IP69K Mass 240 g
Compliance with standards and directives
Standard conformity
Shock and impact resistance 100 g according to DIN EN 60068-2-27 Standards EN 60947-5-2:2007
Approvals and certificates
CSA approval cCSAus Listed, General Purpose, Class 2 Power Source
e1 Type approval 2006/28/EG
EMC Properties
Emitted interference and interference immunity in accordance with motor vehicle directive 2006/28/EG (e1 Type approval) Interference immunity in accordance with DIN ISO 11452-2: 100 V/m Frequency band 20 MHz up to 2 GHz Mains-borne interference in accordance with ISO 7637-2:
Pulse 1 2a 2b 3a 3b 4 Severity level III III III III III III Failure criterion C A C A A C
EN 61000-4-2: CD: 8 kV / AD: 15 kV Severity level IV IV EN 61000-4-3: 30 V/m (80...2500 MHz) Severity level IV EN 61000-4-4: 2 kV Severity level III EN 61000-4-6: 10 V (0.01...80 MHz) Severity level III EN 55011: Klasse A
) 20 a
M
B
0
v
L
range programming )
10 ... 30 V DC
25 mA 200 ms
short-circuit protected 100 mA
(one output for each axis)
0 ... 500 at U
= 18 ... 30 V
B
IEC 60947-5-2:2007
Release date: 2013-04-22 13:58 Date of edition: 2013-04-22 201501_eng.xml
Refer to “General Notes Relating to Pepperl+Fuchs Product Information”.
www.pepperl-fuchs.com fa-info@us.pepperl-fuchs.com fa-info@sg.pepperl-fuchs.com
USA: +1 330 486 0001 Singapore: +65 6779 9091
Germany: +49 621 776 4411Pepperl+Fuchs Group
fa-info@de.pepperl-fuchs.com
1
Inclination sensor INY360D-F99-2I2E2-V17
Dimensions
Pinout
1
8
7
M12
2
6
53
4
LEDs
Button
7 30 718.5
37
64
104510
4 x ø 5.5
Wire colors
1 WH 2 BN 3 GN 4 YE 5 GY 6 PK 7 BU 8 RD
(white) (brown) (green) (yellow) (gray) (pink) (blue) (red)
Accessories
65
V17-G-2M-PUR
Female cordset, M12, 8-pin, shielded, PUR cable
Sensor Orientation
In the default setting the zero position of the sensor is reached, when the electrical connection faces straight upwards.
- On request, all required mounting positions can be preset at the factory. For example: X = 0 if the electrical connection points straight downwards.
X Orientation
-
X = 0° X = 90° X = ±180° X = 270° (-90°)
Y Orientation
+
+
-
V17-G-5M-PUR
Female cordset, M12, 8-pin, shielded, PUR cable
V17-G-10M-PUR
Female cordset, M12, 8-pin, shielded, PUR cable
V17-G-10M-PVC-ABG
Female cordset, M12, 8-pin, shielded, PVC cable
Y = 0° Y = 90° Y = ±180° Y = 270° (-90°)
2
Refer to “General Notes Relating to Pepperl+Fuchs Product Information”.
www.pepperl-fuchs.com fa-info@us.pepperl-fuchs.com fa-info@sg.pepperl-fuchs.com
USA: +1 330 486 0001 Singapore: +65 6779 9091
Germany: +49 621 776 4411Pepperl+Fuchs Group
fa-info@de.pepperl-fuchs.com
Release date: 2013-04-22 13:58 Date of edition: 2013-04-22 201501_eng.xml
Loading...
+ 2 hidden pages