Pepperl+Fuchs IDM-Z1-161-M-1D-J1-BT-N-N0, IDM-Z1-161-M-1D-J1-BT-P-N0, IDM-Z1-261-M-2D-J1-BT-N-N0 User Manual

IDM-Z1-161-M-1D-J1-BT-N-N0
IDM-Z1-161-M-1D-J1-BT-P-N0
IDM-Z1-261-M-2D-J1-BT-N-N0

Bluetooth handheld scanner
for use in explosion­hazardous areas Zone 1/21

Manual

With regard to the supply of products, the current issue of the following document is applicable: The
General Terms of Delivery for Products and Services of the Electrical Industry, published by the Central
Association of the Electrical Industry (Zentralverband Elektrotechnik und Elektroindustrie (ZVEI) e.V.)
in its most recent version as well as the supplementary clause: "Expanded reservation of proprietor­ship"

Worldwide

Pepperl+Fuchs Group

Lilienthalstr. 200

68307 Mannheim

Germany

Phone: [phone] - 0

E-mail: [e-mail]

North American Headquarters

Pepperl+Fuchs Inc.

1600 Enterprise Parkway

Twinsburg, Ohio 44087

USA

Phone: [phone]

E-mail: [e-mail]

Asia Headquarters

Pepperl+Fuchs Pte. Ltd.

P+F Building

18 Ayer Rajah Crescent

Singapore 139942

Phone: [phone]

E-mail: [e-mail]

https://www.pepperl-fuchs.com

IDM-Z1-161-M-1D-J1-BT-N-N0, IDM-Z1-161-M-1D-J1-BT-P-N0, IDM-Z1-261-M-2D­J1-BT-N-N0

1 Safety .......................................................................................................................... 4

1.1 Introduction.................................................................................................... 4

1.1.1 Content of this Document .................................................................. 4

1.1.2 Manufacturer...................................................................................... 4

1.1.3 Target Group, Personnel .................................................................... 4

1.1.4 Symbols Used ................................................................................... 5

2 Technical Specifications ........................................................................................... 6

2.1 Explosion Protection..................................................................................... 6

2.2 Technical Data for Bluetooth Scanner ......................................................... 7

2.3 Use ..................................................................................................................7

3 SYSTEM STRUCTURE................................................................................................ 9

3.1 Overview......................................................................................................... 9

3.2 System Structure 1...................................................................................... 11

3.3 System Structure 2...................................................................................... 11

3.4 System Structure 3...................................................................................... 13

4 Commissioning........................................................................................................ 16

4.1 Preparing Bluetooth Handheld Scanners .................................................16

4.2 Pinout of Supply Module with RS232 or USB ........................................... 21

4.3 Base connection line RS232....................................................................... 23

4.4 Base connection line USB ..........................................................................24

5 Accessories.............................................................................................................. 26

0000-00

3

IDM-Z1-161-M-1D-J1-BT-N-N0, IDM-Z1-161-M-1D-J1-BT-P-N0, IDM-Z1-261-M-2D­J1-BT-N-N0

1 Safety

1.1 Introduction

1.1.1 Content of this Document

This document contains information required to use the product in the relevant phases of the
product life cycle. This may include information on the following:

• Product identification

• Delivery, transport, and storage

• Mounting and installation

• Commissioning and operation

• Maintenance and repair

• Troubleshooting

• Dismounting

• Disposal

Note

For full information on the product, refer to the further documentation on the Internet at
www.pepperl-fuchs.com.

The documentation comprises the following parts:

• This document

• Datasheet

In addition, the documentation may comprise the following parts, if applicable:

• EU-type examination certificate

• EU declaration of conformity

• Attestation of conformity

• Certificates

• Control drawings

• Instruction manual

• Other documents

1.1.2 Manufacturer

Pepperl+Fuchs Group
Lilienthalstraße 200, 68307 Mannheim, Germany

Internet: www.pepperl-fuchs.com

1.1.3 Target Group, Personnel

Responsibility for planning, assembly, commissioning, operation, maintenance, and dismount­ing lies with the plant operator.

Only appropriately trained and qualified personnel may carry out mounting, installation, com­missioning, operation, maintenance, and dismounting of the product. The personnel must have
read and understood the instruction manual and the further documentation.

Prior to using the product make yourself familiar with it. Read the document carefully.

4

0000-00

IDM-Z1-161-M-1D-J1-BT-N-N0, IDM-Z1-161-M-1D-J1-BT-P-N0, IDM-Z1-261-M-2D­J1-BT-N-N0

1.1.4 Symbols Used

This document contains symbols for the identification of warning messages and of informative
messages.

Warning Messages

You will find warning messages, whenever dangers may arise from your actions. It is mandatory
that you observe these warning messages for your personal safety and in order to avoid prop­erty damage.

Depending on the risk level, the warning messages are displayed in descending order as fol­lows:

Danger!

This symbol indicates an imminent danger.

Non-observance will result in personal injury or death.

Warning!

This symbol indicates a possible fault or danger.

Non-observance may cause personal injury or serious property damage.

Caution!

This symbol indicates a possible fault.

Non-observance could interrupt the device and any connected systems and plants, or result in
their complete failure.

Informative Symbols

Note

This symbol brings important information to your attention.

Action

This symbol indicates a paragraph with instructions. You are prompted to perform an action or
a sequence of actions.

0000-00

5

IDM-Z1-161-M-1D-J1-BT-N-N0, IDM-Z1-161-M-1D-J1-BT-P-N0, IDM-Z1-261-M-2D­J1-BT-N-N0

2 Technical Specifications

2.1 Explosion Protection

1D-Modelle:

II 2G Ex ib IIB T4 Gb

II 2D Ex ib IIIC T135°C Db

2D-Modelle:

II 2G Ex ib op is IIB T4 Gb

II 2D Ex ib op is IIIC T135°C Db

Test certificate

IBExU18ATEX1050
IECEx IBE 18.0009

Manufacturer

Pepperl+Fuchs Group
Lilienthalstraße 200
68307 Mannheim, Germany
[e-mail]

0000-00

6

IDM-Z1-161-M-1D-J1-BT-N-N0, IDM-Z1-161-M-1D-J1-BT-P-N0, IDM-Z1-261-M-2D­J1-BT-N-N0

2.2 Technical Data for Bluetooth Scanner

IDM-Z1-161-M-1D­J1-BT-N-N0

Description Linear imager 2-D imager

Barcode One-dimensional 1-D

(barcode)

Barcode types Code 39, Code 39 Trioptic, Code 32, Code 93, Code 11, Codabar,

Stacked codes - PDF417, Micro-

2-D code types - Data Matrix, QR code,

Light source LED, visible red light (630 nm)

Scan frequency 500 Hz 60 Hz

Reading dis-tance 20 mm ... 850 mm 30 mm ... 400 mm

Code resolution Approx. ≥ 0.076 mm Approx. ≥ 0.13 mm

Immunity to extrane­ous light

Electrical data

Current con-sumption 330 mA (Standby 80/130 mA; Peak 500 mA)

Battery Lithium ion battery 3.6 V; 1500 mAh

Battery power Up to 60,000 scans at full battery charge

Feedback

Visual 2 x LED (operating state/read confirmation)

Acoustic Buzzer (can be switched off)

Ambient conditions

Shock resistance 50 drop tests on concrete from a height of 2 m

Operating tempera­ture

Storage temperature -30 °C to +70 °C -40 °C to +70 °C

Relative humidity 95 % non-condensing

Mechanical data

Degree of protection IP65

Dimensions [W x H x D]104 mm x 176 mm x 76 mm

Code 128, GS1-128 / EAN 128, UPC / EAN / JAN (with addition),
MSI/Plessey, UK/Plessey, IATA, Interleaved 2 of 5, Standard and
Industrial 2 of 5, Matrix 2 of 5, Telepen, GS1 DataBar, Australian Post,
China Post, German Post, US Planet, US Postnet, British Post, Intelli­gent Mail, Japan Post, Korean Post, Dutch KIX Post

100,000 lx

-20 °C to +50 °C

IDM-Z1-161-M-1D­J1-BT-P-N0

One-dimensional 1-D
(Barcode and stacked
code incl. PDF417)

PDF417, Code 49,
Code 16K, Compos­ite, Codablock F

IDM-Z1-261-M-2D­J1-BT-N-N0

One-dimensional 1-D
& 2-D (Barcode and
stacked code incl.
PDF417)

MicroQR-Code,
Aztec, MaxiCode

2.3 Use

0000-00

Weight Approx. 260 g

The handheld scanner is a piece of handheld apparatus.

7

IDM-Z1-161-M-1D-J1-BT-N-N0, IDM-Z1-161-M-1D-J1-BT-P-N0, IDM-Z1-261-M-2D­J1-BT-N-N0

It enables portable recording and direct data transfer of barcodes and 2-D codes in explosion­hazardous areas. The device is specifically modified for use in explosion-hazardous areas of
Zone 1 and Zone 21.

0000-00

8

IDM-Z1-161-M-1D-J1-BT-N-N0, IDM-Z1-161-M-1D-J1-BT-P-N0, IDM-Z1-261-M-2D­J1-BT-N-N0

3 SYSTEM STRUCTURE

3.1 Overview

The Bluetooth handheld scanners and their accessories are presented in the following over­view. Charging the handheld scanner batteries can take place within the hazardous area using
the Zone 1/21 certified base station and the associated power module. Furthermore, the scan­ner can be charged in the safe area using a base station/charging cradle.

0000-00

9

IDM-Z1-161-M-1D-J1-BT-N-N0, IDM-Z1-161-M-1D-J1-BT-P-N0, IDM-Z1-261-M-2D­J1-BT-N-N0

10

Figure 3.1 Handheld scanners and accessories

In the following two chapters, the typical usage cases are described in more detail.

0000-00