Pepperl+Fuchs IDM-Z1-160-D-1D-J1-SU-N-N0, IDM-Z1-160-D-1D-J1-SU-P-N0, IDM-Z1-260-D-2D-J1-S1-N-N0 User Manual

IDM-Z1-160-D-1D-J1-SU-N-N0
IDM-Z1-160-D-1D-J1-SU-P-N0
IDM-Z1-260-D-2D-J1-S1-N-N0

Wired handheld scanner for
use in explosion-hazardous
areas Zone 1/21

Manual

With regard to the supply of products, the current issue of the following document is applicable: The
General Terms of Delivery for Products and Services of the Electrical Industry, published by the Central
Association of the Electrical Industry (Zentralverband Elektrotechnik und Elektroindustrie (ZVEI) e.V.)
in its most recent version as well as the supplementary clause: "Expanded reservation of proprietor­ship"

Worldwide

Pepperl+Fuchs Group

Lilienthalstr. 200

68307 Mannheim

Germany

Phone: [phone] - 0

E-mail: [e-mail]

North American Headquarters

Pepperl+Fuchs Inc.

1600 Enterprise Parkway

Twinsburg, Ohio 44087

USA

Phone: [phone]

E-mail: [e-mail]

Asia Headquarters

Pepperl+Fuchs Pte. Ltd.

P+F Building

18 Ayer Rajah Crescent

Singapore 139942

Phone: [phone]

E-mail: [e-mail]

https://www.pepperl-fuchs.com

IDM-Z1-160-D-1D-J1-SU-N-N0, IDM-Z1-160-D-1D-J1-SU-P-N0, IDM-Z1-260-D-2D­J1-S1-N-N0

1 Safety .......................................................................................................................... 4

1.1 Introduction.................................................................................................... 4

1.1.1 Content of this Document .................................................................. 4

1.1.2 Manufacturer...................................................................................... 4

1.1.3 Target Group, Personnel .................................................................... 4

1.1.4 Symbols Used ................................................................................... 5

2 Technical Specifications ........................................................................................... 6

2.1 Explosion protection ..................................................................................... 6

2.2 Technical Data: Handheld Scanner .............................................................. 7

2.3 Use ..................................................................................................................7

3 System Structure....................................................................................................... 8

3.1 Overview......................................................................................................... 8

3.2 IDM-Z1-160-D-1D-J1-* System Structure 1................................................ 10

3.3 IDM-Z1-160-D-1D-J1-* System Structure 2................................................ 11

3.4 IDM-Z1-160-D-1D-J1-* System Structure 3................................................ 12

3.5 IDM-Z1-260-D-2D-J1-S1-N-N0 System Structure 1 ................................... 13

3.6 IDM-Z1-260-D-2D-J1-S1-N-N0 System Structure 2 ................................... 13

3.7 IDM-Z1-260-D-2D-J1-S1-N-N0 System Structure 3 ................................... 14

4 Commissioning........................................................................................................ 16

4.1 Connection of the Wired Handheld Scanners...........................................16

4.2 Supply Module Connection ........................................................................16

4.3 Base connection line RS232....................................................................... 18

4.4 Base connection line USB ..........................................................................19

5 Accessories.............................................................................................................. 21

2019-12

3

IDM-Z1-160-D-1D-J1-SU-N-N0, IDM-Z1-160-D-1D-J1-SU-P-N0, IDM-Z1-260-D-2D­J1-S1-N-N0

1 Safety

1.1 Introduction

1.1.1 Content of this Document

This document contains information required to use the product in the relevant phases of the
product life cycle. This may include information on the following:

• Product identification

• Delivery, transport, and storage

• Mounting and installation

• Commissioning and operation

• Maintenance and repair

• Troubleshooting

• Dismounting

• Disposal

Note

For full information on the product, refer to the further documentation on the Internet at
www.pepperl-fuchs.com.

The documentation comprises the following parts:

• This document

• Datasheet

In addition, the documentation may comprise the following parts, if applicable:

• EU-type examination certificate

• EU declaration of conformity

• Attestation of conformity

• Certificates

• Control drawings

• Instruction manual

• Other documents

1.1.2 Manufacturer

Pepperl+Fuchs Group
Lilienthalstraße 200, 68307 Mannheim, Germany

Internet: www.pepperl-fuchs.com

1.1.3 Target Group, Personnel

Responsibility for planning, assembly, commissioning, operation, maintenance, and dismount­ing lies with the plant operator.

Only appropriately trained and qualified personnel may carry out mounting, installation, com­missioning, operation, maintenance, and dismounting of the product. The personnel must have
read and understood the instruction manual and the further documentation.

Prior to using the product make yourself familiar with it. Read the document carefully.

4

2019-12

IDM-Z1-160-D-1D-J1-SU-N-N0, IDM-Z1-160-D-1D-J1-SU-P-N0, IDM-Z1-260-D-2D­J1-S1-N-N0

1.1.4 Symbols Used

This document contains symbols for the identification of warning messages and of informative
messages.

Warning Messages

You will find warning messages, whenever dangers may arise from your actions. It is mandatory
that you observe these warning messages for your personal safety and in order to avoid prop­erty damage.

Depending on the risk level, the warning messages are displayed in descending order as fol­lows:

Danger!

This symbol indicates an imminent danger.

Non-observance will result in personal injury or death.

Warning!

This symbol indicates a possible fault or danger.

Non-observance may cause personal injury or serious property damage.

Caution!

This symbol indicates a possible fault.

Non-observance could interrupt the device and any connected systems and plants, or result in
their complete failure.

Informative Symbols

Note

This symbol brings important information to your attention.

Action

This symbol indicates a paragraph with instructions. You are prompted to perform an action or
a sequence of actions.

2019-12

5

IDM-Z1-160-D-1D-J1-SU-N-N0, IDM-Z1-160-D-1D-J1-SU-P-N0, IDM-Z1-260-D-2D­J1-S1-N-N0

2 Technical Specifications

2.1 Explosion protection

IDM-Z1-160-D-1D-J1-*

II 2G Ex ib IIC T4 Gb

II 2D Ex ib IIIC T135°C Db

IDM-Z1-260-D-2D-J1-*

II 2G Ex ib op is IIB T4 Gb

II 2D Ex ib op is IIIC T135°C Db

Test certificate

IBExU 18ATEX1049
IECEx IBE 18.0008

Manufacturer

Pepperl+Fuchs Group

Lilienthalstraße 200, 68307 Mannheim, Deutschland

[e-mail]

2019-12

6

IDM-Z1-160-D-1D-J1-SU-N-N0, IDM-Z1-160-D-1D-J1-SU-P-N0, IDM-Z1-260-D-2D­J1-S1-N-N0

2.2 Technical Data: Handheld Scanner

IDM-Z1-160-D-1D­J1-SU-N-N0

Description Linear imager 2-D imager

Barcode One-dimensional 1-D

(barcode)

Barcode types Code 39, Code 39 Trioptic, Code 32, Code 93, Code 11, Codabar,

Stack codes - PDF417, MicroPDF417, Code 49, Code 16K,

2-D code types - Data Matrix, QR-

Light source LED, visible red light, 630 nm

Scan frequency 500 Hz 60 Hz

Reading distance 20 mm to 850 mm 30 mm to 400 mm

Code resolution
(code-dependent)

Immunity to extrane­ous light

Electrical data

Interfaces RS232 / RS422 / USB RS232 / USB

Feedback

Visual 2x LED (operating state/read confirmation)

Acoustic Beeper / buzzer (can be switched off)

Ambient conditions

Shock resistance 50 drop tests on concrete from a height of 2 m

Operating tempera­ture

Storage temperature -30 °C to +70 °C -40 °C to +70 °C

Relative humidity 95 % non-condensing

Mechanical data

Degree of protection IP65

Dimensions [W x H x D]104 mm x 185 mm x 76 mm

Code 128, GS1-128 / EAN 128, UPC / EAN / JAN (with addition),
MSI/Plessey, UK/Plessey, IATA, Interleaved 2 of 5, Standard and
Industrial 2 of 5, Matrix 2 of 5, Telepen, GS1 DataBar, Australian Post,
China Post, German Post, US Planet, US Postnet, British Post, Intelli­gent Mail, Japan Post, Korean Post, Dutch KIX Post

Approx. ≥ 0.076 mm Approx. ≥ 0.13 mm

100,000 lx

-20 °C to +50 °C

IDM-Z1-160-D-1D­J1-SU-P-N0

One-dimensional 1-D
(Barcode and stack
code incl. PDF417)

Composite, Codablock F

IDM-Z1-260-D-2D­J1-S1-N-N0

One-dimensional 1-D
& 2-D
(Barcode and stack
code incl. PDF417)

Code, MicroQR-Code,
Aztec, MaxiCode

2.3 Use

2019-12

Weight Approx. 200 g without connection cable

The handheld scanner is a piece of handheld apparatus.

It enables portable recording and direct data transfer in explosion-hazardous areas. The device
is specifically modified for use in explosion-hazardous areas of zone 1 and zone 21.

7

IDM-Z1-160-D-1D-J1-SU-N-N0, IDM-Z1-160-D-1D-J1-SU-P-N0, IDM-Z1-260-D-2D­J1-S1-N-N0

3 System Structure

3.1 Overview

The wired handheld scanners and their accessories are presented in the following overview.
The handheld scanners can be connected to a Pepperl+Fuchs VisuNet operator workstation.
Connection can be either via the external power module or an integrated barrier (applies to Vis­uNet GXP). The data can be transferred via the network interface of the VisuNet operator work­station to a host PC in the safe area.

Alternatively, the handheld scanners can be connected to a PC or a programmable logic con­troller (PLC) with the associated power module and operated as "standalone" units.

2019-12

8