Inductive analog sensor IA5-18GM-I3
Dimensions
M18x1
4
Model Number
IA5-18GM-I3
Features
• Inductive analog
• Output 0 mA ... 20 mA
• Flush mounting
Connection
BN
BK
BU
L+
L-
Accessories
BF 18
Mounting flange, 18 mm
24
60
Technical Data
General specifications
Switching element function Analog current output
Installation flush
Output polarity DC
Measurement range 2 ... 5 mm
Nominal ratings
Operating voltage UB15 ... 30 V
Repeat accuracy ± 6 µm
No-load supply current I
Analog output
Output type 0 ... 20 mA
Linearity error ≤ ± 10 % of full-scale value
Load resistor ≤ 500 Ω
Rate of current rise
0 ... 20 mA
20 ... 0 mA
Recovery time 1 ... 10 ms , typ. 5 ms
Adjustment tolerance zero point ≤ ± 10 % of full-scale value
Temperature drift ≤ ± 0.1 %/K of full-scale value
Operating voltage ≤ 1 %
Residual ripple ± 30 µA
Ambient conditions
Ambient temperature -10 ... 70 °C (14 ... 158 °F)
Mechanical specifications
Connection type cable PVC , 2 m
Core cross-section 0.5 mm
Housing material brass, nickel-plated
Sensing face PBT
Protection degree IP67
Compliance with standards and directives
Standard conformity
Standards
Approvals and certificates
UL approval cULus Listed, General Purpose
CSA approval cCSAus Listed, General Purpose
CCC approval Products with a maximum operating voltage of ≤36 V do not bear a
≤ 10 mA
0
max. 5.1 A/s
max. 4 A/s
2
EN 60947-5-2:2007
IEC 60947-5-2:2007
EN 60947-5-7:2003
IEC 60947-5-7:2003
CCC marking because they do not require approval.
Release date: 2012-05-09 14:58 Date of issue: 2012-05-09 015323_eng.xml
Subject to modifications without notice
Copyright Pepperl+Fuchs
1
Loading...