
Fieldbus Diagnostic Handheld
BusTrig.
USB
Diagnosis/Alarm
-
+S
Battery
+
–
FDH
Germany: +49 621 776 2222Pepperl+Fuchs Group
Refer to "General Notes Relating to Pepperl+Fuchs Product Information".
USA: +1 330 486 0002 Singapore: +65 6779 9091
www.pepperl-fuchs.com pa-info@us.pepperl-fuchs.com pa-info@sg.pepperl-fuchs.com
pa-info@de.pepperl-fuchs.com
Fieldbus Diagnostic Handheld
FDH-1
Comprehensive diagnostics for the fieldbus physical layer
<
Handheld with display and integrated expert system
<
Fieldbus interface Ex ia, FISCO, Entity, and DART
<
For commissioning, online monitoring and troubleshooting
<
For FOUNDATION Fieldbus H1 and PROFIBUS PA
<
Multi-language support
<
Operation in Zone 1/Class I, Div. 1
<
Choice of power options for different operating modes
<
PC software for enhanced interface and data backup
<
Function
The FieldConnex® Fieldbus Diagnostic Handheld FDH‑1 is a comprehensive measurement and commissioning tool. The handheld can be
connected to any point of a segment. Via display and push buttons, FDH‑1 guides the user through many scenarios of testing. FDH‑1 can record
and store data for up to 32 segments with maximum device count without requiring a connection to a PC.
FDH‑1 supports inexperienced and expert users alike through different operating modes. Failure margin checks and device coupler tests help set
up the optimum condition of the fieldbus infrastructure and find weak spots in the installation. The expert system and wizards enable easy
handling and require little or no training. FDH‑1 supports multiple languages that can be downloaded onto the handheld.
FDH‑1 Manager Software Premium can operate the handheld with enhanced visualization. The software loads data from FDH‑1 and saves data
back, to allow for comparisons between actual and planned physical layer attributes.
Connection
Technical Data
General specifications
Design / Mounting Handheld/mobile
Supply
Connection Fieldbus , Battery , 9V 6LR61 block, type alkaline, carbon-zinc, lithium iron disulfide,
Fieldbus interface
Fieldbus type FOUNDATION Fieldbus/PROFIBUS PA
Rated voltage U
Rated current I
Indicators/operating means
Release date: 2021-01-12 Date of issue: 2021-01-12 Filename: 250382_eng.pdf
N
nickel-cadmium, nickel-metal hydride, or rechargeable lithium , USB
8.5 ... 35 V
N
... 10 mA , if bus powered
1

Fieldbus Diagnostic Handheld FDH-1
Germany: +49 621 776 2222Pepperl+Fuchs Group
Refer to "General Notes Relating to Pepperl+Fuchs Product Information".
USA: +1 330 486 0002 Singapore: +65 6779 9091
www.pepperl-fuchs.com pa-info@us.pepperl-fuchs.com pa-info@sg.pepperl-fuchs.com
pa-info@de.pepperl-fuchs.com
Technical Data
Display LC display
Keypad Membrane 8 keys
Directive conformity
Electromagnetic compatibility
Directive 2014/30/EU EN 61326-1:2013
Standard conformity
Electromagnetic compatibility NE 21:2011
Degree of protection IEC 60529
Shock resistance EN 60068-2-27
Vibration resistance EN 60068-2-6
Software
Languages English (default), German (optional), Portuguese (optional),
Ambient conditions
Ambient temperature -20 ... 50 °C (-4 ... 122 °F)
Storage temperature -20 ... 70 °C (-4 ... 158 °F)
Relative humidity < 95 % non-condensing
Shock resistance 15 g , 11 ms
Vibration resistance 1 g , 10 ... 150 Hz
Mechanical specifications
Connection type Fieldbus: Cable with test clips and cable with test plugs, 2.5 mm
Degree of protection IP44
Mass 500 g
Data for application in connection with hazardous areas
EU-Type Examination Certificate ZELM 14 ATEX 0531
Marking 1 II 2(1) G Ex ib [ia Ga] IIC T4 Gb ,
Bus
Type Fieldbus
Type of protection ia, ib
Internal capacitance C
Internal inductance L
Voltage U
i
Bus
Type Fieldbus
Type of protection ic
Internal capacitance < 1.8 F
Internal inductance < 1.5 µH
Voltage U
i
Outputs
Type Trigger output
Maximum safe voltage U
Interface
Type USB interface
Maximum safe voltage U
Voltage U
i
Directive conformity
Directive 2014/34/EU EN 60079-0:2012 , EN 60079-11:2012
International approvals
CSA approval CSA 16.70029275
Approved for Class I, Division 2, Groups A, B, C, D T4
Release date: 2021-01-12 Date of issue: 2021-01-12 Filename: 250382_eng.pdf
Trigger output: Cable with 2 banana plugs
USB: Square type B socket
1 II 3(1) G Ex ic [ia Ga] IIC T4 Gc ,
1 II 3 G Ex ic IIC T4 Gc ,
1 II (1 D) [Ex ia IIIC Da] ,
1 II (3 D) [Ex ic IIIC Dc]
< 1.8 nF
i
< 1.5 µH
i
30 V
35 V
140 V
m
253 V
m
6 V
Associated equipment for Class I, Division 1
2