Pepperl Fuchs CVS58 Data Sheet
Singleturn absolute encoder CVS58
Technical data
General specifications
Detection type photoelectric sampling
Device type Singleturn absolute encoder
Functional safety related parameters
MTTFd 80 a
Mission Time (TM) 20 a
L
1.9 E+11 at 6000 rpm and 20/40 N axial/radial shaft load
10
Diagnostic Coverage (DC) 0 %
Electrical specifications
Model Number
CVS58
Features
• Industrial standard
housing Ø58 mm
•Servo or clamping flange
•16 Bit singleturn
• Galvanically isolated CAN
interface
•2 limit switches
• 8 programmable cams
• Velocity and acceleration output
• Event triggered process data
transfer
Description
Absolute encoders deliver an absolute step value
for each angle setting. All these values are
represented by code samples on one or more code
disks which are sampled by a photoelectric array.
The absolute encoder has a maximum basic
resolution of 65536 steps per revolution (16 Bits).
The encoders integrated CAN bus interface
supports all CANopen functions. The following
operating modes can be programmed, and can be
selectively turned on or off:
• Polled mode
•Cyclic mode
•Sync mode
The device is designed for shaft assembly and is
available in servo flange or clamping flange design.
The bus electronics module is integrated into the
removable housing cover. This makes it possible to
mount or replace the encoder and the bus
electronics separately during installation or service.
Operating voltage U
No-load supply current I
Time delay before availability t
Linearity ± 2 LSB at 16 Bit, ± 1 LSB at 13 Bit, ± 0,5 LSB at 12 Bit
Output code binary code
Code course (counting direction) cw ascending (clockwise rotation, code course ascending)
Interface
Interface type CANopen
Resolution
Single turn up to 16 Bit
Overall resolution up to 16 Bit
Transfer rate max. 1 MBit/s
Standard conformity communication profile: DS 301
Connection
Terminal compartment in removable housing cover
Standard conformity
Degree of protection DIN EN 60529, IP65
Climatic testing DIN EN 60068-2-30 , no moisture condensation
Emitted interference EN 61000-6-4:2007
Noise immunity EN 61000-6-2:2005
Shock resistance DIN EN 60068-2-27, 100 g, 6 ms
Vibration resistance DIN EN 60068-2-6, 20 g, 10 ... 2000 Hz
Ambient conditions
Operating temperature -40 ... 85 °C (-40 ... 185 °F)
Storage temperature -40 ... 85 °C (-40 ... 185 °F)
Mechanical specifications
Material
Combination 1 housing: powder coated aluminum
Combination 2 (Inox) housing: stainless steel
Mass approx. 550 g (combination 1)
Rotational speed max. 12000 min
Moment of inertia 30 gcm
Starting torque ≤ 3 Ncm (version without shaft seal)
Shaft load
Axial 40 N
Radial 110 N
Approvals and certificates
UL approval cULus Listed, General Purpose, Class 2 Power Source
B
0
v
10 ... 30 V DC
max. 350 mA
< 250 ms
cw descending (clockwise rotation, code course
descending)
Device profiles: DS 406 and DS 417 , programmable
according to class 2
IP66 (with shaft seal)
flange: aluminum
shaft: stainless steel
flange: stainless steel
shaft: stainless steel
approx. 1100 g (combination 2)
-1
2
Release date: 2018-07-27 09:21 Date of issue: 2018-07-27 t49160_eng.xml
Refer to “General Notes Relating to Pepperl+Fuchs Product Information”.
1
Singleturn absolute encoder CVS58
Dimensions
30 L
10
18
1
10h8
ø 58
ø 53
36f7
3 3.5
* Singleturn: L = 69, Multiturn : L = 80
** Aluminum: d = 59, stainless steel: d = 61
4
6f6
ø 58
ø 50f7
10
d**
3
25
L
d**
12.7
27.5
27.5
ø 58
ø 58
3 x 120°
63
M4 x 0.7
6
M3 x 0.5
6
63
88
TK ø 48
M4 x 0.7
6
TK ø 42
15°
3 x 120°
40
60
3 x 120°
3
3
* Singleturn: L = 69, Multiturn : L = 80
** Aluminum: d = 59, stainless steel: d = 61
Electrical connection
Terminal Cable Explanation
⊥ - Ground connection for power supply
(+) Red Power supply
(-) Black Power supply
G-CAN ground
LBlueCAN low
H White CAN high
G-CAN ground
LBlueCAN low
H White CAN high
25
12.7
40
60
Release date: 2018-07-27 09:21 Date of issue: 2018-07-27 t49160_eng.xml
Refer to “General Notes Relating to Pepperl+Fuchs Product Information”.
2
Loading...