Pentax C70210HK User Manual

QUICK REFERENCE SHEET

Manual Iris Lens

C70214
C70409
C70807

Auto Iris Lens

C70210HK(FQ)
C70406HK(FQ)
C70804HK(FQ)

2.8 mm Manual Iris Lens (Iris Range 1.2 – C)
4 mm Manual Iris Lens (Iris Range 1.2 – C)
8 mm Manual Iris Lens (Iris Range 1.2 – C)

2.8 mm Auto Iris Lens (Iris Range 1.2 – 200)
4 mm Auto Iris Lens (Iris Range 1.2 – 200)
8 mm Auto Iris Lens (Iris Range 1.2 – 200)

Manual Iris Vari-Focal Lens

C70213
C70313
C70612

2.8 – 6 mm Manual Iris Vari-Focal Lens (Iris Range 1.4 – C)

3.5 – 8 mm Manual Iris Vari-Focal Lens (Iris Range 1.4 – C)
6 – 12 mm Manual Iris Vari-Focal Lens (Iris Range 1.6 – C)

Auto Iris Vari-Focal Lens

C70220DCPS Day/Night
C70315HK/FQDay/Night
C70319HK

C60635DCPS Day/Night
C70223HK
C70509HK

2.8 – 6 mm Auto Iris Vari-Focal Lens (Iris Range 1.4 – 200)
3 – 8 mm Auto Iris Vari-Focal Lens (Iris Range 1.0 - 200 )

3.5-8 mm Auto Iris Vari-Focal Lens (Iris Range 1.4 – 200)
6 – 12 mm Auto Iris Vari-Focal Lens (Iris Range 1.6 – 200)

2.8-12 mm Auto Iris Vari Focal Lens (Iris Range 1.4 – 360)
5-50 mm Auto Iris Vari-Focal Lens (Iris Range 1.8 – 360)

DCPS = Standard length cable with on Auto iris Lens connector attached
FQ = Short Cable on Auto Iris Lens with connector attached
HK = Long Cable on Auto Iris Lens with connector attached

All lenses in 1/3 Format

Contact Pentax @ [phone] www.pentaxcanada.ca

Contact Connsec Products @ [phone] www.connsecproducts.com

GLOSSARY OF TERMS

APERTURE – An opening or hole through which light passes. In the optical system it is equal to the diameter of the

largest entering beam of light that can travel completely through the system. This may be equal to the front lens of the
objective.

MAXIMUM APERTURE – The largest size to which the iris diaphragm of the lens can be opened. (The lowest f-number)

IRIS – The lens “iris” is a mechanical device for controlling the lens aperture (lens opening). A lens may be fixed, manual

controlled and / or voltage controlled.

AUTOMATIC IRIS – An iris that automatically adjusts to control the light reaching a sensor to compensate for light level
changes.

“C” MOUNT – A television industry standard for lens mounting, which has a 1 – inch diameter, threaded barrel and 32
threads per inch. The sensor is located 0.69 inches behind the mounting surface.

“CS” MOUNT – A television industry standard for lens mounting, which has a 1-inch diameter, threaded barrel and 32
threads per inch. The sensor is located 0.492 inches behind the mounting surface.

BACK FOCUS - A term used to describe the relationship of the distance of the lens iris (aperture) to the imager device
(CCD chip). This distance is critical to maintain proper depth of field through changing focal lengths and varying light
conditions. The back focus is achieved by adjusting the imager position or lens collar in the camera itself.

F-NUMHER – The f –number indicates the brightness of the image formed by the lens, controlled by the iris. A smaller f­number means a brighter image

F-STOP – A term used to indicate the speed of the lens. The smaller the f-number, the greater is the amount of light
passing through the lens.

DEPTH OF FIELD – The front to back zone in a field of view, which is in focus in the televised scene. With a greater
depth of field, more of the scene, near to far, is in focus. Increasing the f-stop number increases the depth of field of the
lens. Therefore, the lens aperture should be set at the highest f-stop number usable with the available lighting. In other
words, the depth of field is the area in front of the camera, which remains in focus. The larger the f- numbers the greater
the depth of field.

FIELD OF VIEW – The maximum angle of view that can be seen through the lens of an optical assembly.

FOCAL LENGTH – The distance from the centre of the lens to a plane at which point a sharp image of an object viewed

at an infinite distance from the camera is produced. The focal length determines the size of the image and the angle of the
view seen by the camera through the lens. That is the distance from the centre of the lens to the pick up device.

FORMAT – Format is a term used to determine the size of the lens to be used with various types and sizes of imagers. A
1” format lens will work on 1”, 2/3”, ½” and, 1/3” format camera. A 2/3” format lens will work on 2/3’, ½” and 1/3” format
camera. A ½” format lens will work on ½” and 1/3” format camera. A 1/3” format lens will work on 1/3” format cameras
only. Using a smaller format lens on a larger format camera will cause distortions ranging from tunnel –vision to poor
back-focus capabilities.

LUX – International system unit of illumination in which the meter is the unit of length. One lux equals one lumen per
square meter. 10 lux equals 1 foot-candle

Contact Pentax @ [phone] www.pentaxcanada.ca

Contact Connsec Products @ [phone] www.connsecproducts.com