Pentax 03 Fish-Eye, 04 Toy Lens Wide, 05 Toy Lens Telephoto Operating Manual

PENT AX

03FISH-EYE
04

TOY

LENS

WIDE

05

TOY

LENS

TELEPHOTO

1~m~~sJ3~

ifffliR~=t!

~m~~~

A~~~~Ai

58237

OPERATING MANUAL
MODE D'EMPLOI

BEDIENUNGSANLEITUNG

MANUAL DE INSTRUCCIONES

Copyright©

HOYA CORPORATION 2011

H01-2011 05 Printed in Philippines

~

~

Please read this operating manual carefully before using the lens to ensure that it is used
properly.

* Illustrations shown herein are that of

appearance.

Specifications and external dimensions are subject to change without notice.

Thank you for purchasing a PENTAX lens. This lens is an interchangeable lens

specifically designed for the PENT

In

addition, also refer to your camera operating manual.

11

AX

digital cameras with the Q-mount.

03 FISH-EYE

...

They may differ from the actual

Refer

& Warning

& Caution

to

your camera operating manual for details about mounting and removing the lens.

FOR SAFE USE

Never look at the sun through the lens. Serious damage
total loss of eyesight may occur.

Do

not leave the lens

passing through the lens will be intensified, and should it focus on

flammable materials, fire may occur.

OF

YOUR LENS

in

direct sunlight without lens cover. Direct sunlight

to

your eyes or

Precautions When Using the Lens

II

Storage and mildew prevention

•

Take
place.

• Avoid storing the lens in a poorly ventilated place such as a closet, wardrobe, drawer,
vehicle, or where insect repellent or medicine is kept.

• Avoid storing the lens
mildew growth. Store the lens with a desiccant (anti- mildew agent)
container, or plastic bag.

the lens out of the protective case or camera bag, and store it

in

areas of high temperature and humidity, where there is a risk of

in a dry,

in

a dry cabinet, airtight

well-ventilated

II

Precautions and lens maintenance

• Never use any organic solvent such
the lens.

• The lens is a precise optical instrument.
shocks or pressure. Use a cushion or similar pad to protect the lens from the vibrations of
motorcycles, automobiles, boats, etc.

• Avoid subjecting the lens to rapid changes
occur
and take it out after the lens temperature reaches the ambient level.

• When the lens is not attached to the camera
lens mount cover to protect it from dust.

•

Do
support. The inner parts of the camera can
Be

•
malfunction.

• Have the lens inspected by a dealer every one or two years to maintain its performance.

on

both inside and outside of the lens. Put the lens

not leave the camera with the lens cover off attached to a tripod or other rigid camera

careful not to damage or dirty the lens mount surface as this could result

as

thinner, alcohol, or benzine, etc.

Be

careful not to let it fall, or subject it to strong

in

temperature, otherwise condensation can

in

a plastic bag or camera bag,

body,

be

damaged

attach both the supplied lens cover and

by

direct sunlight.

to

remove dust

in

on

failure or

:t=:::11j

-I---III

•

8 G

Names of Parts

Focusing ring
Lens mount

hood cannot be attached.

lens

or

Filter

*

1

2

Focusing

This
The

to focus more

lens

"MF Assist"

specifically

is

function on your camera

easily.

designed for

details,

For

Main Specifications

3.2mm
(Approx. 17.5mm)

6-5

3
4

manual

enlarges the image on the monitor and enables

refer to your camera operating

Mounting index

Lens cover

focusing.

6.3mm
(Approx. 35mm) (Approx. 1

4-3

you

manual.

18mm

OOmm)

3-3

64°

.1

Fixed at
Q-mount Q-mount

0.07m (0.23ft)

Approx.

40.6mm
( 1.6in

Aoorox. 21a

available. The shutter speed can be set slower

F7

15x

0.

x 25mm

1.0in) (1.6in

x

(0.7oz.)

e

Minimum focus

distance
Maximum

maanification
Max. Diameter

Lenath

Weiaht

Remarks

x

160°
Fixed at F5.6
Q-mount

0.09m (0.30ft)

Approx.

40.6mm

Bulb

up to 2 seconds.

0.06x

30.5mm

x

shooting

is

not

For customers in USA

STATEMENT

This device complies with Part 15 of the FCC Rules. Operation

two conditions: (

accept any interference received,

OF FCC COMPLIANCE

This device may not cause

1)
including

harmful

interference that may cause undesired operation.

interference, and (2) this device must

24.5°
Fixed at

0.27m (0.89ft)

Approx.

40.6mm

A

is subject to the

F8

0.08x

x

0.8in)

x

19.5mm

following

Changes or modifications not approved by the party responsible for

user's

the

authority to operate the equipment.

compliance could void