Pentatech DF400K Operating Instructions Manual

Download

DF400K

Zusatz Funk-Überwachungskamera

Bedienungsanleitung Seite 2

Caméra de vidéosurveillance sans fil additionelle

Mode d'emploi page 6

Extra draadloze bewakingscamera

Gebruiksanwijzingen page 9

Additional Wireless Observation Camera

Operating instructions page 12

Telecamera di videosorveglianza via radio addizione

Instruzioni per funzionamento page 15

Bedienungsanleitung

1. Einleitung

Bitte lesenSie dieseBedienungsanleitung vollständigund sorgfältigdurch. Die Bedienungsanleitung gehört zu diesem Produkt und enthält wichtige HinweisezurInbetriebnahmeundHandhabung. LesenSieauchdieBedienungsanleitungdesGrundsets. BeachtenSieimmeralleSicherheitshinweise.SolltenSieFragenhaben oder unsicher inBezug aufdie Handhabungder Gerätesein, dannholen Sieden RateinesFachmannesein. Bewahren Siediese Anleitung bittesorgfältig aufund gebenSie sie ggf.an Dritteweiter.

2. BestimmungsgemäßeVerwendung

Die Zusatz Funk-Überwachungskamera besteht aus der Kamera DF400K und einem Netzgerät. Die Zusatzkamera ist ein optionales Zubehör zur Ergänzung des DF400 Sets. Es dient zur Überwachung von Objekten (z.B. Räumen, Tür- und Eingangsbereichen, Einfahrten) mit Bild und Ton. Die Bild- und Tonübertragung zum Smartrecorder erfolgt drahtlos mit einer Frequenzvon2,4GHz. Die Stromversorgung der DF400K erfolgt überdas mitgelieferte Netzgerät, angeschlossenamNetzstrom230V~AC,50Hz. Bei ausreichenden Lichtverhältnissen wird ein Farbbild von der Kamera übertragen. Wird die Umgebungsbeleuchtung zu schwach, schaltet sich automatisch die integrierte Infrarotbeleuchtung ein. Hierbei wird der Nahbereich(bis zumax.14m) ausgeleuchtetunddasVideobild schaltetfür eine bessere Empfindlichkeit in den schwarz/weiß- Modus. Um die Bildqualität bei Tag und Nacht zu optimieren, wird ein interner Filter mechanischbeiderUmschaltungausgetauscht. Ist eineÜberwachung beiDunkelheit oderbeischlechten Lichtverhältnissen erwünscht,sowirdeinezusätzlicheBeleuchtungempfohlen. Es können Bilder von bis zu vier drahtlosen Kameras DF400K am Smartrecorderempfangenwerden. DieKanäle könnenmanuelleinzeln oder automatisch übereine Scan-Funktionnacheinander angewähltwerden. Sie können auch gleichzeitigauf einem inQuadranten geteilten TV/Bildschirm betrachtetwerden(mehrereMöglichkeitenzurTeilungvorhanden). Die Funkübertragung erfolgt auf digitaler Basis auf immer wechselnden Frequenzen (Frequenzhopping) die zwischen Kamera und Smartrecorder synchronisiert sind. Nur der Smartrecorder, der mit der Kamera “gepaart” ist, kann die synchronisierten Signale empfangen. Hierdurch ist eine Abhörsicherheitgegeben. Die Kamera ist wetterfest (Schutzart IP66) und somit sowohl zur ÜberwachungvonInnenräumen,alsauch zurMontagean einergeschützten Stelle im Außenbereich geeignet. Das Netzgerät muss jedoch vor FeuchtigkeitundNässegeschütztwerden. Die Überwachungskamera ist für den Betrieb in privaten Haushalten

konzipiert. Beachten Sie die Vorschriften bezüglich Videoüberwachung in gewerblichen und öffentlichen Bereichen. Eine Videoüberwachung ersetzt nichtIhreSorgfalts-,Vorsorge-oder Aufsichtspflicht. Jede andere Verwendung oder Veränderung der Geräte gilt als nicht bestimmungsgemäß und birgt erhebliche Unfallgefahren. Der Hersteller haftet nicht für Schäden, die durch nicht bestimmungsgemäßen Gebrauch oderfalscheBedienungverursachtwerden. DiesesGerät istnicht dafürbestimmt, durchPersonen(einschließlich Kinder) mit eingeschränkten physischen, sensorischen oder geistigen Fähigkeiten odermangelsErfahrungund/odermangelsWissen benutztzuwerden,es sei denn, sie werden durch eine für ihre Sicherheit zuständige Person beaufsichtigtodererhielten vonihr Anweisungen,wiedas Gerätzu benutzen ist. Kinder müssen beaufsichtigt werden, um sicherzustellen, dasssie nicht mitdemGerätspielen.

3. Lieferumfang

KameramitAnschlusskabelfürNetzgerät

Antenne

Netzgerät5VDC

KamerahalterungmitBefestigungsmaterial

Bedienungsanleitung

(s.Abb. A)

4. Technische Daten

KameraDF400K

Betriebsspannung 5V DC(Netzgerät) Stromaufnahme max.500mA

Bildsensor 1/4”CMOS Erfassungswinkel ca.55°horizontal,ca.44°vertikal Lichtempfindlichkeit 1Lux(ohneIR-LEDs) Dämmerungssensor 1-8Lux Ausleuchtung 6Infrarot-LEDs Infrarotfilter automatischerAustausch WeitsichtbeiNacht max.14m Mikrofon eingebaut Schutzklasse IP66 AbmessungenGehäuse 123xØ60mm Betriebstemperatur -10°Cbis+40°C

Netzgerät

Betriebsspannung 230V~50Hz Ausgangsspannung 5 V DC,1,0A

D-2

1 2 3 4 56 7 8 9 10 1112 1314 15

16 17 18

3D-

2016/12/01

5. Ausstattung(s.Abb. A)

1 Bewegungssensor 2 Power-LED 3 Infrarot-LEDs 4 Dämmerungssensor 5 Objektiv 6 Verbindungs-LED 7 Antenne 8 Halterung 9 Feststellschraube

10 Antennenbuchse 11 Buchse für Halterung 12 Mikrofon 13 Dreiecksmutter 14 Pairing-Taste 15 Netzgerät-Anschluss 16 Dübel 17 Netzgerät 18 Schrauben

6. Sicherheitshinweise

Diefolgenden Hinweisedienen IhrerSicherheit undZufriedenheit beimBetrieb desGerätes. BeachtenSie, dassdie Nichtbeachtungdieser Sicherheitshinweise zuerheblichenUnfallgefahrenführenkann.

Gefahr!

Gesundheit undSachwertegefährdet.

Lassen Sie Kleinkinder nicht unbeaufsichtigt mit dem Gerät, Verpackungsmaterial oder Kleinteilen! Andernfalls droht Lebensgefahr durchErsticken!

Beschädigen Sie bei Bohrarbeiten und beim Befestigen keine Leitungen für Gas, Strom, Wasser oder Telekommunikation! Andernfalls droht Lebens-,Verletzungsgefahr!

Behandeln Sie die Zuleitungenvorsichtig! Verlegen Sie diese so,dass sie nicht beschädigt werden können und keine Stolpergefahr darstellen. Ziehen Sie die Kabel nicht über scharfe Kanten, und quetschen oder klemmen Sie sie nicht anderweitig ein. Andernfalls drohen Lebens- und Verletzungsgefahr!

Achten Siebei derÜberwachung vonBabys oderKleinkindern darauf,dass die Kamera und dasKabel außer Reichweite des Kindes sind.Andernfalls drohenLebens-undVerletzungsgefahr!

Verhindern Sie, dass das Netzgerät mit Feuchtigkeit in Berührung kommenundtauchen Siedas Gerätnichtins Wasserein! Andernfallsdroht Lebensgefahr!

Betreiben Sie das Gerät ausschließlich mitdem mitgelieferten Netzgerät. Vergewissern Sie sich vor demNetzstromanschluss des Netzgerätes, dass der Netzstrom vorschriftsmäßig mit 230 V ~ AC, 50 Hz und mit einer vorschriftsmäßigenSicherungausgestattetist.

Setzen Sie das Gerät nicht der Nähe von Feuer, Hitze oder lang andauernderhoherTemperatureinwirkungaus!

Schützen Sie das Gerät vor starken mechanischen Beanspruchungen und Erschütterungen!

Schützen Sie das Gerät vor starken magnetischen oder elektrischen Feldern!

Verwenden Sie das Gerät nur mit den gelieferten Originalteilen oder Originalzubehör!

Überprüfen Sie vor dem Zusammenbau und der Inbetriebnahme die LieferungaufBeschädigungenundVollständigkeit!

Ziehen Sie beilängerem Nichtbenutzen des Gerätesimmer das Netzgerät ausderNetzsteckdose.

Schließen Siekein beschädigtesGerät (z.B.Transportschaden)an. Fragen

4D-

Bei Nichtbeachtung dieses Hinweises werden Leben,

Sie im ZweifelsfallIhren Kundendienst. Reparaturenund Eingriffe an den GerätendürfennurvonFachkräftendurchgeführtwerden.

7. PlatzierungderKamera

Bevor Sie die Kamera montieren, planen Sie zuerst deren Montagestelle. Überprüfen Sievon dortaus vor derMontage dieFunktion derKamera unddie Funk-Übertragung.

AchtenSieauf folgendePunkte:

DieKamerasolltesoangebrachtwerden, dassmöglichstkeindirektes Licht oder Sonneneinstrahlung auf das Objektiv fällt, ansonstenkann das Bild übersteuert werden. Denken Sie daran, dassdie Position der Sonne nicht konstant ist. ÜberprüfenSie am besten vorder Montage dasKamerabild. Nehmen Siehierzu das Gerätin Betrieb und haltenSie die Kamera andie gewünschte Stelle. Verändern Sie bei Bedarf die Kameraposition, bis Sie denoptimalenBildausschnittgefundenhaben.

Wählen Sie den Abstand zwischen Kamera und Objekt je nach der gewünschtenDetailerkennungaus.

Die Kamera besitzt eine Infrarotausleuchtung für den Nahbereich. Diese wird über den Dämmerungssensor geschaltet. Durch eine zusätzliche Beleuchtung der Umgebung bei Nacht können Sie die Bildqualität der Kameraverbessern.

Achten Sie darauf, dass der Montageort der Kamera und des Smartrecordersmöglichst Staub-und vibrationsfreiist, unddass einegute Luftzirkulationgegebenist.

AchtenSiedarauf,dass sichinderNäheeineNetzsteckdosebefindet.

Wollen Siedie Kamera imAußenbereich montieren, sollteder Montageort nach Möglichkeitvor direktemRegeneinfall geschütztsein. DasNetzgerät muss im Innenbereich sein. Die Steckerverbindung zum Netzgerätkabel musssogeschütztwerden,dasskeineNässeindieVerbindunggelangt.

Achten Siedarauf, dasssich einegeeignete Durchführungsmöglichkeitfür dasNetzgerätkabelamMontageortbefindet.

Richten Sie die Kamera für die nächtliche Aufnahme nicht nach Außen durch ein Glasfenster, da hierbei das Bild durch Reflektion der Infrarotausleuchtunggestörtwird.

Wenn Sie automatische Aufnahmen durch Bewegungserkennung starten möchten, dann achten Sie darauf, dass im Kamerabild keine Hintergrundbewegung vorhanden istwie z. B.Bäume, deren Ästesich im Windbewegenkönnen.

Stellen Sie die Kamera so, dass die häufigste Bewegung quer zum Bewegungssensor [1] stattfindet. Querbewegungen werden schneller erfasstalsBewegungen direktauf denSensorzu (s.Abb. B).MontierenSie die Kamera nicht in der Nähe von Heizkörpern oder Lüftungsschächten bzw. richtenSie sie nichtdarauf aus, dader Bewegungssensor aufWärme reagiert.

Die maximale Reichweite der Funkübertragung beträgt ca. 100 m (bzw. bei optimalen Bedingungen bis zu 150 m) bei Sichtkontakt zwischen Kamera undSmartrecorders. InGebäuden istdie Reichweitedurch Wände (insbesondere Stahlbeton-Wände) und Decken deutlichgeringer (typisch ca. 20 m). Blechflächen z.B. Kühlschrank, Blechregale und bedampfte SpiegelschirmenauchdieFunkübertragungab.

Die Funkübertragung kann durch starke elektrische Felder und andere Funkgeräte beeinträchtigt werden. Achten Sie auf ausreichende

Entfernungzu:Mikrowellenherden, Funktelefonen,Handys,Funk-Geräten im2,4GHzBereich,elektrischenMotorenundStarkstromleitungen.

8. MontageundAnschlussderKamera

Die Kamera kann an der Wand oder an der Decke montiert werden bzw. aufgestelltwerden.

Für die Wand-oder Deckenmontage befestigenSie die Halterung [8]mit den mitgelieferten Schrauben [18] und ggf. Dübeln [16] an einer geeigneteStelle.

DrehenSiedasGewinde derHalterungin dasentsprechendeGewinde [11] amKameragehäuse.

Richten Siedie Kamera ausund drehenSie die seitlicheFeststellschraube [9]anderHalterungsowiedieDreiecksmutter[13]fest.

DrehenSiedieAntenne[7]aufdieAntennenbuchse[10].

DrehenSiedieAntennebitteso,dasssiesenkrechtnachobensteht.

Verbinden Sie den Kleinspannungsstecker des Netzgerätes [17] mit dem Netzgerät-Anschluss[15]derKamera.

SteckenSiedasNetzgerätineinegeeigneteNetzsteckdose.

DiePower-LED[2] leuchtetrotauf.

9. Verbindungsaufbau

Die Zusatzkamera und der Smartrecorder DF400R müssen miteinander gepaartwerden(Pairing),um eineFunkverbindung aufzubauen.Dieim DF400 Set enthaltenen Kameras sind im Werk mit Kanal 1und Kanal 2 des Smartrecorders bereits gepaart. Um die Zusatzkamera (bis max 2 Zusatzkameras)mitdemSmartrecorderzuverbinden,gehenSiewiefolgtvor:

WählenSie imHauptmenü “Paarung”[49] unter“Kameraeinstellungen” aus.

KlickenSiedenKamerakanalan,denSiepaarenmöchten.

Drücken Sie innerhalb von 35 Sekunden die Pairing-Taste [14] an der Kamera.

10. WartungundReinigung

DieGerätesindwartungsfrei:ÖffnenSiesiedeshalbniemals.

ÜberprüfenSieregelmäßigdietechnischeSicherheitunddieFunktion.

ZiehenSievorderReinigungdasNetzgerätausderSteckdose.

Äußerlich dürfen die Geräte nur mit einem weichen, nebelfeuchten Tuch oderPinselgereinigtwerden.

11. Entsorgung

Sie dürfenVerpackungsmaterial oderGeräte nichtim Hausmüll entsorgen, führen Sie sie der Wiederverwertung zu. Den zuständigen Recyclinghof bzw. dienächste Sammelstelle erfragenSie bei IhrerGemeinde.

12. Konformitätserklärung

Hiermit erklären wir, INDEXA GmbH, Paul-Böhringer-Str. 3, D - 74229 Oedheim, dass sich die DF400K in Übereinstimmung mit den grundlegenden Anforderungen und den anderen relevanten Vorschriften der Richtlinie2014/53/EU befindet.Die Konformitätserklärungzu diesemProdukt findenSieunterwww.indexa.de.

13. RechtlicheHinweise

Dieses Produkt oder diese Software kann Code unter der GNU General Public License v2, wie z.B. den linux kernel, unter der GNU Lesser General Public Licensev2.1oderunterderApacheLizenzv2.0enthaltenoderverwenden. Wenn Sie weitere Informationen zuLizenzbedingungen und – soweit von der Lizenzverlangt –Source Codeserhalten möchten,senden Siebitte eineE-Mail an copyrequest@indexa.de, umdiese kostenlos zu erhalten.Einige Lizenzen verlangen jedoch die Bereitstellung von physikalischen Kopien des Source Codes. Auch in diesem Fall können Sie eine Kopie der Source Codes erhalten, indemSie unsunter copyrequest@indexa.dekontaktieren. Fürdiese Leistung werden wirIhnen diebei unsentstehenden nominellenKosten berechnen(d.h. die Kosten für die physikalische Durchführung der Bereitstellung des Source Codes. Hinweis: einer oder mehrererder Lizenzen, diehier aufgelistet sind,abhängig von dem exaktenProduktund derVersion,dieSiegewählthaben.

DieentsprechendenLizenztextefindenSieamEndederAnleitung.

Ihre Kopie des Produktes enthält möglicherweise keinen Code unter

14. Garantie

Auf dieses Gerät leistet der Hersteller zusätzlich zu den gesetzlichen Gewährleistungsansprüchen gegenüber dem Verkäufer, gemäß nachstehenden Bedingungen, 2 JAHRE GARANTIE ab Kaufdatum (Nachweis durch Kaufbeleg). Diese Garantiefrist gilt nur gegenüber dem Erstkäufer und ist nicht übertragbar. Diese Garantie gilt nur für den Gebrauch unter normalen Wohnbedingungen in privaten Haushalten. Ihre gesetzlichen Rechte werden durch diese Garantie nicht eingeschränkt. DieGarantie giltnur für Material-und Herstellungsfehlerund ist auf Tausch oder Reparatur fehlerhafter Geräte beschränkt. Die Garantieleistung beschränkt sich in jedem Fall auf den handelsüblichen Preis des Gerätes. Die Garantie giltnicht für Verschleißteile,Batterien oder Akkus.Diese Garantie giltnur, wenn die Bedienungs- und Pflegeanleitungen befolgt wurden. Schäden, die auf Missbrauch, unsachgemäße Handhabung, äußereEinwirkungen, Staub, Schmutz, Wasser oder allgemein auf anomale Umweltbedingungen zurückzuführen sind sowie Schäden, die durch Überspannung, Akkus, Batterien oder eine nicht geeignete Spannungsversorgung verursacht wurden, sind von der Garantie ausgeschlossen. Die Garantie erlischt, wenn Reparaturen oder Eingriffe von Personenvorgenommen werden,die hierzu nichtermächtigt sind,oder wenndieses Gerät mit Ergänzungs- oder Zubehörteilen versehen wird oder solche verwendet werden, die nicht auf dieses Gerät abgestimmt sind. Innerhalb der Garantiezeit informieren Sie sich bei der zuständigen Vertriebsfirma über Rücksendemodalitäten. Rücksendungen müssen gut verpackt und frei Haus erfolgen. nicht autorisierte oder nicht frei gemachte Sendungen werden nicht angenommen. Reparaturenkönnen nur bearbeitetwerden, wenn eineausführliche Fehlerbeschreibung beiliegt. Senden Sie überdies nur komplette Systeme zurück. Nach Ablauf der Garantiezeit sind Reparaturen kostenpflichtig und nicht immer möglich. Garantieleistungen bewirken weder eine Verlängerung der Garantiefrist, noch setzen sie eine neue Garantiefrist in Gang. Die Garantiefrist für eingebaute Ersatzteile endet mit der Garantiefrist für das Gesamtgerät. Soweit eine Haftung nicht zwingend gesetzlich vorgeschrieben ist, sind weitergehende Ansprüche, insbesondere in Hinsicht auf entstandene Personen- oder Sachschäden durch die Benutzung oder durch keine oder durch fehlerhafte Funktion des Gerätes ausgeschlossen.

Indexa GmbH, Paul-Böhringer-Str. 3, 74229 Oedheim, Deutschland

www.indexa.de Änderungen vorbehalten

D-5

Moded'emploi

1. Introduction

Veuillez lire intégralement et attentivement cette notice d'utilisation. Cette notice d'utilisation fait partie intégrante de ce produit et contient des informations importantes concernant la mise en service et la manipulation. Veuillezlire aussile moded'emploi d'ensemblede base.Respectez toujoursles consignes de sécurité. Si vous avez des questions ou si vous avez un doute s'agissant de l'utilisation des appareils, veuillez demander conseil à un technicien professionnel. Conservez soigneusement ces instructions et remettez-lesàtoutepersonneutile.

2. Utilisationconformeauxinstructions

La caméra de videosurveillance sans fil additionnelle comprend la caméra DF400K et l'adapteur. La caméra additionelle est une accessoire optionelle pour un ensemble DF400 Set. Elle sert à la surveillance des bâtiments (par exemple despièces, desportes etdes entrées) àl'appui d'images etde son. La transmissiondes imageset duson versle smartrecorders'effectue sansfil àune fréquencede2,4 GHz. L'alimentation électrique de la caméra DF400K s'est assurée par ladaptateur fourniquidoitêtrebranchéausecteur230V~AC,50 Hz. Lorsque les conditions de lumière sont suffisantes, la caméra transmet une image encouleurs. Sil'éclairage ambiantest insuffisant,l'éclairage infrarouge intégré se met automatiquement en marche. L'infrarouge éclaire à proximité (jusqu'à14 m)et l'imagevidéo passeen modenoir &blanc pourune meilleure sensibilité.Afind'optimiser laqualité del'imagede jourcomme denuit, lefiltre interneestintervertimécaniquementlorsduchangement. Sil'on souhaiteune surveillancedans l'obscuritéou siles conditionsde lumière ne sont pas bonnes, il est recommandé d'installer une éclairage supplémentaire. Le smartrecorder peutrecevoir les images dequatre caméras sansfil DF400K. Les canaux peuvent être sélectionnés un à un manuellement ou l'un après l'autre automatiquement par une fonction scan. Ils peuvent également être visionnés simultanément sur un écran partagé / téléviseur (plusieurs possibilitésdepartagedisponibles). La transmission radio s'effectue une transmission numérique sur des fréquences changeant continuellement (hopping fréquence) qui sont synchroniséesentre lacaméra etle smartrecorder.Seul lesmartrecorder quiest “couplé”à lacaméra peutrecevoir lessignaux synchronisés.Ce quipermet une protectioncontrelesécoutesindésirables. Lacaméraestinsensible auxintempéries(typede protectionIP66)etpeut ainsi servirà lasurveillance deslieuxintérieurs etmême extérieursàcondition d'être montéedans unendroit protégé.L'adaptateur doittoutefois êtreprotégé contre l'humiditéetl'eau. Cette caméra est conçu pour être utilisé dans les habitations privées. Veuillez respecter les règlementations portant sur les systèmes de surveillance vidéo dans les espaces publics et professionnels. Une surveillance vidéo ne vous libèrepasdevotreobligationdeprécaution,deprudenceoudecontrôle. Toute autre utilisation ou toute modification des appareilsest considérée non conforme et présente des risques d'accidents considérables. Le fabricant ne pourra nullement être tenu responsable des dommages résultant d'une

6- F

mauvaiseutilisation. Cet appareil n'estpas prévu pourêtre utilisé pardes personnes présentantdes capacités physiques, sensorielles ou mentales réduites, ni par des personnes inexpérimentéesoune connaissantpar sonfonctionnement, nipar desenfants, à moins que ces personnes soient sous la surveillance d'une personne répondant de leur sécurité ou qu'elles aient reçu des instructions sur le fonctionnement de l'appareil.Les enfants doiventêtre surveillés pourqu'ils ne jouentpasavecl'appareil.

3. Piècesfourniesàlalivraison (voirfigureA)

Caméraaveccâbledebranchementpourl'adaptateur

Antenne

Adaptateur5V DC

Supportavecmatérieldefixation

Instructionsd'utilisation

4. Caractéristiquestechniques

Caméra DF400K

Tension d'alimentation 5 V DC (adaptateur) Consommation de courant ma. 500 mA

Capteur d'image 1/4" CMOS Angle de saisie ca. 55° horizontale, env. 44° verticale Sensibilité lumineuse 1 lux (sans IR-LEDs) Capteur de crépuscule 1-8 lux Illumination 6 diodes DEL infrarouges Filtre infrarouge changement automatique Prévoyance (nuit) max. 14 m Microphone Intégré Typ de protection IP66 Dimensions boîtier 123x Ø60 mm Température de fonctionnement - 10 °Cà+40°C

Adaptateur

Tension d'alimentation 230V~50 Tension de sortie 5 V , 1,0A

5. Équipement

1 Détecteurdemouvement 2 Indicationdel'alimentation 3 Capteurdecrépuscule 4 DiodesDELinfrarouges 5 Objectif 6 DELdeconnexion 7 Antenne 8 Supportdefixation 9 Visdeblocage

(voir figure A)

10 Prisefemelle d'antenne 11 Prisepour support 12 Microphone 13 Ecroutriangulaire 14 TouchePairing 15 Branchementadaptateur 16 Tampon 17 Adaptateur 18 Vis

6. Consignesdesécurité

Les informations suivantes ont pour but d'assurer votre sécurité et votre satisfaction lorsque vous utilisez l'interphone. Attention: si vous ne respectez pas ces consignes de sécurité, vous vous exposez à un risque considérable d'accident.

Danger! En cas de non respect des informationssuivantes, il peut en résulter un danger de mort, un danger pour la santé ou un risque d'occasionnerdesdommages!

Ne laissez pas l'appareil, ni lematériel d'emballage, ni les petites pièces sans surveillance en présence de petits enfants! Danger de mort par étouffement!

Veillezà nepas abîmerles conduitesde gazou d'eau,ni lesfils decourant électrique ou detélécommunications lors desopérations de perçageet de fixation!Risquedeblessureoudangerdemort!

Manipulez avecprécaution les câblesd'alimentation électrique!Posez-les de sortequ'ils ne soientpas abîméset que personnene trébuche.Ne tirez pasles câblessur desarêtes vives,et veillezà nepasles écraseret àne pas lespincer.Risquedeblessure,voiredangerdemor!

Pour lasurveillance de bébés ou d'enfants enbas âge, veillez à ceque la caméra et le câble soient hors de portéedes enfants. Risque de blessure, voiredangerdemort!

Évitez que le adaptateur est en contact avec de l'humidité et ne plongez paslesappareilsdansl'eau!Dangerdemort!

Ne faites fonctionner le appareil qu'avec le adaptateur fournis. Avant de brancherl'appareil surle secteur,assurez-vous quelesprescriptions soient respectées, doncque le courantd'alimentation est de230 V ~AC, 50Hz etqu'ilyaundisjoncteur.

N'exposez pas au feu, ni à la chaleur, ni à des températures longtempsélevées!

Protégez des secousses et des sollicitations mécaniques importantes!

Protégez deschampsmagnétiquesou électriquesimportants!

N'utilisez qu'avec les pièces livrées d'origine ou les accessoires delamêmemarque!

Vérifiez, avant l'assemblage et la mise en service, que la livraison est complèteetqu'elleneprésentepasdedétérioration!

Lorsque vous n'utilisez pas la caméra pendant un certain temps, débrancheztoujoursleadaptateurdelaprisedecourant.

Ne branchez pas l'appareils'il est abîmé (par exemplesuite à des dégâts de transport). En cas de doute, demandez au service après-vente. Les interventionsetlesréparationssur nedoiventêtreeffectuéesque pardupersonnelspécialisé.

l'appareil

7. Placementdelacaméra

Avant de monter la caméra, étudiez l'emplacement de montage. Vérifiez depuis cetemplacement, avantde procéderau montage,le fonctionnementde lacaméraetlatransmissionradio.

Respectezlespointssuivants:

La caméradoit êtremise enplace de sortequ'il n'yait pas,dans lamesure du possible, de lumière ni de rayons du soleil directement sur l'objectif sinon l'image peut être saturée. N'oubliez pas que le soleil tourne. Le

mieuxestde contrôlerl'imagede lacaméra avantlemontage. Mettezà cet effet l'appareil en service et tenez la caméra à l'emplacement souhaité. Modifiez si nécessaire la position de la caméra jusqu'à ce que vous obteniezleformatd'imagedésiré.

Choisissez la distance entre la caméra et l'objet selon le niveau de détail désiré.

La caméradispose d'uneéclairage infrarougepour leszones rapprochées. Celui-ci estdéclenché par lecapteur decrépuscule. Vouspouvez améliorer la qualitéde l'imagede lacaméra avecun éclairagesupplémentaire pour lanuit.

Veillezà quel'emplacement demontage dela caméraet dusmartrecorder soitsi possibleexempt depoussière etde vibrationset qu'ily aitune bonne circulationd'air.

Veillezà cequ'ilyait uneprisedecourantàproximité.

Si vous souhaitez monter la caméra à l'extérieur, vous devez dans la mesure du possible protéger l'emplacement de montage contre la pluie. L'adaptateur doit être à l'intérieur. La fiche de câble de raccordement au câble de l'adaptateur doit être isolée de telle manière que l'humidité ne puisseypénétrer.

Veillez à disposer d'un passage adéquat pour la mise en place du câble d'adaptateuràl'emplacementdemontage.

Pourles enregistrementsde nuit,ne tournez pasla caméra versl'extérieur depuisune fenêtreen verre,car celanuirait àla qualitéde l'imageà cause delaréflexiondesrayonsinfrarouges.

Si vous souhaitez démarrer des enregistrements automatiques par détection de mouvement, veillez à ce que l'arrière-plan de l'image prise parlacamérasoitfixe(parexemple pasd'arbresdontlesbranchespeuvent bougerencasdevent).

Installer la caméra de façon à ce que les mouvements les plus fréquents aient lieu en diagonale par rapport au détecteur de mouvement [1]. Les mouvement diagonaux parrapport au détecteurde mouvement sontplus rapidement détectésque les mouvementsdirects vers ledétecteur (voir ill. B). Ne pas installer la caméra à proximité de chauffages ou de puits d'aération ou ne pas l'orienter dans leur direction, car le détecteur de mouvementréagitàlachaleur.

La portée maximale de la transmission radio est de 100 m environ (ou dansdes conditionsoptimales jusqu'à200m) avecun contactvisuelentre la caméraet lesmartrecorder. Dansles bâtiments,la portée estnettement plus faible (typiquement env. 20 m) à cause des murs (notamment les murs enbéton armé) etdes plafonds. Les surfacesen tôle par exempleun réfrigérateur, desétagères en tôleet unmiroir avecde labuée constituent unebarrièrepourlatransmissionradio.

La transmission radiopeut être altérée par leschamps électriques forts et d'autres appareils radio. Veillez à ce que les appareils suivants soient suffisamment éloignés: Foursà micro-ondes,téléphones radio, appareils radioen2,4GHz,moteursélectriquesetcâblesàcourantfort.

8. Montageetraccordementdela caméra

Lacaméraestprévuepourêtreposeaumurouála couverture.

Pourune fixationmurale ousur plafond

l'aidedesvislivrées[18]etdestampons[16]àl'emplacement souhaité.

Tournezlesfiletage dusupportdanslefiletage[11]decameraboîtier.

fixez lesupport [8]de lacaméra à

F-7

Ajustez la caméra et tournez la vis de réglage latérale sur le support des écroustriangulaires[13]etdelavisd'ajustage[9].

Tournezl'antenne[7] surlaprisefemelled'antenne[10].

Tournezl'antenne avecprécaution desorte qu'elleest à laverticale vers le haut.

Branchez la fiche mâlede petite tension de l'adaptateur [17]sur la prise detensiondeservice[15]delacaméra.

Branchezl'adaptateurdesecteursurunepriseélectriquequiconvient.

LaDELPOWER[2]s'allumeenrouge.

9. Etablissementdelaconnexion

La caméra addionelleet le smartrecorderDF400R doivent être reliés(pairing) pour établirune connexionradio. Lescaméras contenuesdans lekit DF400Set sont couplées par défaut avec le canal 1 et canal 2 du . Pour brancher unecaméra additionelle(jusqu'à unmaximum de 2autres caméras) surlemoniteur,procédezdelafaçonsuivante:

Choisissez dans lemenu principal la commande“Synchronisation” ([49] Paramètresdela caméra).

Cliquezsurl'entréevidéoquevoussouhaitezsynchroniser.

Appuyez sur la touche Pairing [14] de la caméra dans un délai de 35 secondes.

smartrecorder

10. Entretienetnettoyage

Les appareils ne demandent aucun entretien: C'est pourquoi, vous ne devezjamaislesouvrir.

Vérifiez régulièrement la sécurité technique et le fonctionnement de l'appareil.

Avantlenettoyage,débranchez leadapteurdelaprisedecourant.

Extérieurement, lesappareils ne doiventêtre nettoyés qu'avec unpinceau ouunchiffondouxlégèrementhumide.

11. Élimination de la caméra lorsqu'elle est usagée

Nejetez pasle matérield'emballage etles appareilseux-mêmes,mais amenez-les à des emplacements de récupération. La déchetterie ou l'emplacement de recyclage le plus proche vous seront communiqués parvotreadministrationcommunale.

12. Déclarationdeconformité

Nous, la société INDEXA GmbH, Paul-Böhringer-Str. 3, 74229 Oedheim, Allemagne, déclaronspar la présenteque ceproduit DF400K estconforme aux spécifications fondamentales et aux autres prescriptions applicables de la directiveeuropéenne 2014/53/EZ.Voustrouverez ladéclaration deconformité deceproduitsurlesiteInternetwww.indexa.de.

13. Mentionslégales

Ce produitou celogiciel peutcontenir ou utiliserdes codessous lalicence GNU General Public License v2, commepar exemple le noyau Linux (Linux kernel), sous la licence GNU Lesser General Public License v2.1 ou sous la licence

8- F

Apachev2.0. Si vous souhaitez recevoir de plus amples informations sur les conditions applicables àla licence et- si celle-ci l'exige- sur les codessources, nous vous prions d'envoyer un e-mail à l'adresse copyrequest@indexa.de, pour les recevoirgratuitement. Quelqueslicences exigenttoutefois lamise àdisposition de copies matérielles des codes sources. Dans ce cas, vous pouvez également recevoir une copie des codes sources en nous contactant à l'adresse e-mail copyrequest@indexa.de. Pour cetteprestation, nousvous factureronsles frais nominaux générésauprès de nous(c'est-à-dire lesfrais d'exécution matérielle demiseàdispositiondescodessources. Remarque: sousuneou plusieursdes licenceslistées ici,indépendamment duproduit exact etdelaversionquevousavezchoisis.

Voustrouverezlestextesrelatifsàlalicenceenfindenoticeexplicative.

Votrecopie duproduit necontientpeut-être pasdecode,que cesoit

14. Garantie

Enplusdesprétentionsdegarantielégalesvis-à-vis duvendeur etconformément auxconditionsci-dessous,lefabricantoffreuneGARANTIEDE2ANS àpartirdela date d'achat(justification grâceà unepreuve d'achat). Lagarantie n'est valable que pour le premier acheteur et n'est pas transmissible. Cette garantie n'est valable que pour l'utilisation dans des lieux privés et pour des conditions d'habitation normales. Vos droits légaux nesont pas affectéspar cette garantie. La garantieest valable uniquementpour des défautsmatériels et defabrication. Elle concerne uniquement l'échange ou bien la réparation d'appareils défectueux.Danstouslescas, lagarantieestlimitée auprixcourantde l'appareil. La garantie n'est pas valable pour les pièces d'usure, les piles ou les accumulateurs. Cette garantie n'est valable que si les instructions de manipulation et d'entretienont été respectées.Les dommages résultant d'abus, d'une utilisation inappropriée, d'influences extérieures, de la poussière, de la saleté, de l'eau ou bien plus généralement de conditions environnementales anormales, ainsique les dommagesrésultant de surtension,des accumulateurs, des piles ou d'une alimentation inadéquate sont exclus de la garantie. La garantie n'est plus valable lorsque des réparations ou des interventions ont été faitespardespersonnesnon-habilitées,oubienlorsquedespiècesaccessoiresou de complément ont été ajoutées à l'appareil alors que celles-ci ne sont pas prévuesàceteffet.Vous pouvezvousinformerauprès delasociétéde distribution compétente à propos des modalités de retour. Les retours doivent être correctement emballés et sont renvoyésà vos frais. Les envois non-autorisésou bien non-renvoyésà vos fraisne serontpas acceptés.Les réparationsne peuvent être traitées que si l'envoi est accompagné d'une description détaillée des problèmes. Veuillez nerenvoyer que des systèmes complets.Après échéance de la garantie, les réparations sontpayantes et ne sont pas toujours possibles.Les prestations de garantie n'induisent pas de prolongement de la période de garantie ni de renouvellement de cette période de garantie. La période de garantiepourlespiècesderemplacementincorporéessetermineenmêmetemps que la période de garantie de l'appareil. Si d'autres responsabilités légales ne sont pas expressémentprescrites, toutes lesautres prétentions, enparticulier en ce qui concerne des dommages sur les personnes ou le matériel du fait de l'utilisationou nonde l'appareil,ou biendu fonctionnementdéfectueux deceluici,sontexlues.

Indexa GmbH, Paul-Böhringer-Str. 3, 74229 Oedheim, Allemagne

www.indexa.de Sous réserve de modifications

Gebruiksaanwijzing

1. Inleiding

Lees deze gebruiksaanwijzing s.v.p. volledig en zorgvuldig door. De gebruiksaanwijzing behoort bijdit product en bevat belangrijkeaanwijzingen voordeingebruiknemingenhetgebruik. Leesookhetgebruiksaanwijzingvandebasisset. Let steeds op alle veiligheidsaanwijzingen. Als u vragen hebt of onzeker bent overhetgebruikvandeapparaten,vraagdanadviesaaneendeskundige. Bewaar dezegebruiksaanwijzing zorgvuldig engeef dieindien nodigdoor aan derden.

2. Gebruikvolgensdevoorschriften

De extra draadloze bewakingscamera bestaat uit de camera DF400K en de nettransformator. De extra bewakingscamera is een optionele accessoire voor een set DF400 Set. Hij dient ter bewaking van objecten (bijv. ruimtes, deuringangsgebieden, inritten) met beeld en geluid. De overdracht van beeld en geluid naar de smartrecorder gebeurt draadloos met een frequentie van 2,4 GHz. De stroomverzorging van de DF400K gebeurt via de meegeleverde nettransformator,aangeslotenaanhetnetstroom230V~AC,50Hz. Bijvoldoende lichtverhoudingenbrengt decamera eenkleurenfoto over.Als de omgevingsverlichting te zwak wordt, schakelt automatisch de infraroodverlichting in. Hierbij wordt de onmiddellijke omgeving (tot 14 m) helemaalverlicht enschakelt hetvideobeeld vooreen beteregevoeligheid over naar dezwart/wit modus. Omde beeldkwaliteit zoweloverdag als 's nachtste optimaliseren, wordt bij de overgang van dag naar nacht en omgekeerd een intern filter mechanisch omgeschakeld. Als bewaking bij donker of bijslechte lichtverhoudingengewenstis,bevelenwijeenextraverlichtingaan. Op de smartrecorder kunnen beelden van maximaal vier draadloze camera's DF400K worden ontvangen. De kanalen kunnen met de hand individueel of automatisch via een scan-functie na elkaar worden gekozen. Ze kunnen ondertussen opeen gedeeldebeeldscherm/TV bekekenworden (diverseopties voorverdelingvanhetbeeldscherm). De geluidoverdrachtgebeurt opdigitalebasis opsteeds wisselendefrequenties (frequentiehoppen) dietussen cameraen smartrecorderzijn gesynchroniseerd. Alleen de smartrecorder die met de camera "gepaard" is, kan de gesynchroniseerde signalen ontvangen. Hierdoor is men verzekerd tegen afluisteren. De camera is weerbestendig (beschermingstype IP66) en dus zowel geschikt voorhetbewaken vanbinnenruimtes alsvoor hetmonteren opeen beschermde plaats buiten.De nettransformator moetwel tegen vochten nattigheidworden beschermd. De is bedoeld voor gebruik in particuliere huishoudens. Let op de

camera voorschriften met betrekking tot videobewaking in industriele en publieke gebieden. Videobewaking komt niet in de plaats van uw eigen verantwoordelijkheid,voorzorgofplichtomtoezichttehouden. Elk ander gebruikvan of wijziging aande apparaten geldt alsniet volgens de voorschriften en heeft wezenlijke risico's op ongelukken. De producent is niet aansprakelijkvoorschades,die dooronbedoeldgebruikof verkeerdebediening wordenveroorzaakt.

Dit apparaat is niet geschikt om te worden gebruikt door personen (inclusief kinderen) met beperkte fysieke, sensorische of geestelijke vermogens of met gebrek aan ervaring en/of kennis, tenzij zij onder toezicht staan van een persoon die voor hun veiligheid verantwoordelijk is of van hem aanwijzingen hebben gekregen, hoeze het apparaatmoeten gebruiken. Mendient erop toe tezien,datkinderennietmethetapparaatspelen.

3. Omvangvandelevering

Camerametaansluitkabelvoornettransformator

Antenne

Nettransformator5VDC

Houdermetbevestigingsmateriaal

Gebruiksaanwijzing

(zieafb.A)

4. Technische gegevens

CameraDF400K

Bedrijfsspanning 5V DC (nettransformator) Stroomopname 500 mA

Beeldsensor 1/4" CMOS Hoek ong. 55° horizontaal, ca. 44° verticaal Lichtgevoeligheid 1 Lux (Zonder de IR-LEDs) Schemeringssensor 1-8 Lux Verlichting 6 Infrarood LEDs Infraroodfilter automatisch vervangen Afstands visie bij nacht max. 14 m Microfoon ingebouwd Beschermingsgraad IP 66 Afmetingen behuizing 123xØ60mm Bedrijfstemperatuur -10°C tot + 40°C

Nettransformator

Bedrijfsspanning 230 V ~, 50 Hz Uitgangsspanning 5 V , 1,0 A

5. Uitrusting

1 Bewegingssensor 2 Power LED 3 InfraroodLEDs 4 Schemeringssensor 5 Objectief 6 Verbindings-LED 7 Antenne 8 Houder 9 Vastzetschroef 10 Antennebus 11 Bus voorbevestiging 12 Microfoon 13 Driehoekmoer 14 Pairing-toets 15 Nettransformator-aansluiting 16 Plug

(zieafb.A)

NL - 9

17 Nettransformator 18 Schroef

6. Veiligheidsaanwijzingen

De volgende aanwijzingen dienen uw veiligheid en tevredenheid bij het gebruik van het apparaat. Let erop dat het veronachtzamen van deze veiligheidsaanwijzingentotaanzienlijkeongevalrisico'skanleiden.

Gevaar!

voorlevenengezondheid.

Laat kleine kinderen niet zonder toezicht met het apparaat, verpakkingsmateriaal of onderdelen spelen! Anders dreigt levensgevaar doorverstikking!

Beschadig bij boorwerkzaamheden en bij het bevestigen geen leidingen voor gas, stroom, water of telecommunicatie! Anders dreigt levens- of verwondingsgevaar!

Wees voorzichtigmet de leidingen!Verplaats deze zo,dat ze niet kunnen worden beschadigden datmen erniet over kanstruikelen. Trek dekabels niet over scherperanden, en drukof klem zeniet ergens af.Anders dreigt levens-enverwondingsgevaar!

Let erbij hettoezicht opbaby's ofkleine kinderenop, datde camera ende kabel buiten bereik van het kind zijn. Anders dreigt levens- en verwondingsgevaar!

Verhinder, datde nettransformator met vochtin aanraking komt endoop deapparatennietinhetwater!Andersdreigtlevensgevaar!

Bedien de apparat uitsluitend met de meegeleverde nettransformator. Vergewis u er, voordat u de nettransformator aan het elektriciteitsnet aansluit, van dat de netstroom volgens voorschrift voorzien is van 230 V ~ AC, 50 Hz en dat die voorzien is van een voorgeschreven beveiliging.

Let op!

voorwerpenontstaan.

Stel de apparat niet bloot aan de nabijheid vanvuur, hitte of langdurige inwerkingvanhogetemperaturen!

Beschermdeapparattegensterkemechanischebelastingenenschokken!

Beschermdeapparattegensterkemagnetischeofelektrischevelden!

Gebruik de apparat alleen met de geleverde originele delen of originele onderdelen!

Controleer voor de montage en de ingebruikneming de levering op beschadigingenenvolledigheid!

Koppel bij langer niet-gebruiken van het apparaat steeds de nettransformatorafvanhetstopcontact.

Sluit geen beschadigd apparaat (bijv. transportschade) aan. Vraag bij twijfel uwklantendienst om raad.Reparaties enoperaties aan deapparat mogenalleendoordeskundigenwordengedaan.

10 - NL

Bij veronachtzaming van deze aanwijzing bestaat er gevaar

Bij veronachtzaming van deze aanwijzingkan er schade aan

7. Plaatsingvandecamera

Voordat u de camera monteert, plant u eerst de montageplaats. Controleer vandaaruit voor de montage de functie van de camera en de radiooverbrenging. Letopdevolgendepunten:

De camera moet zo worden aangebracht, dat er zo mogelijk geen direct licht of zonnestralen op het objectief vallen, anders kan het beeld overgemoduleerd worden. Denk eraan, dat de positie van de zon niet constant is. Controleer bij voorkeur voor de montage het camerabeeld. Neemhiervoorhet apparaatin gebruiken houdde cameraop degewenste plaats. Verander desgewenst de camerapositie, tot u het optimale fragmenthebtgevonden.

Kies de afstand tussen camera en object afhankelijk van de gewenste detailherkenning.

Decamera heefteen infraroodverlichtingvoor deonmiddellijke omgeving. Deze wordt via de schemeringssensor geschakeld. Door een extra verlichting van de omgeving bij nacht kunt u de beeldkwaliteit van de cameraverbeteren.

Let erop, dat de montageplaats van de camera en van de smartrecorder zoveel mogelijk stof- en trillingsvrij is, en dat ersprake is van een goede luchtcirculatie.

Leterop,datereenstopcontactindebuurtis.

Alsu decamera buitenwilt monteren,moet demontageplaats zomogelijk beschermd zijn tegen directe regeninval. De nettransformator moet zich binnen bevinden. De stekkerverbinding met de kabel van de nettransformator moet zo zijn beschermd, dat er geen vocht in de verbindingkankomen.

Let erop dat er een geschikte doorvoermogelijkheid voor de nettransformatorkabelopdemontageplaatsis.

Richtde cameravoor nachtelijkeopnames nietvia eenvenster naarbuiten omdat het beeld door de reflectie van de infraroodbelichting wordt verstoord.

Als ude automatischeopnames met bewegingsdetectiewilt starten,moet u erop letten dat er op de achtergrond van het camerabeeld geen bewegingenplaatsvinden,zoalsdoordewindbewegendeboomtakken.

Plaats decamera zodat de meestfrequente beweging haaks tenopzichte vande bewegingssensor[1] plaatsvindt.Bewegingen haaksop decamera worden sneller gedetecteerd dan bewegingen die direct op de sensor gericht zijn (zie afb. B). Monteer de camera niet in de buurt van warme objecten of ventilatieschachten en richt de camera daar ook niet op, aangeziendebewegingssensorreageertopwarmte.

De maximale reikwijdte van de radio-overdracht bedraagt ca. 100 m (resp. bij optimaal gebruik tot 150m) bij zichtcontact tussen camera en smartrecorder. In gebouwen is de reikwijdte door muren (vooral staalbetonmuren) en plafonds duidelijk minder (typisch ca. 20m). Voorwerpen als koelkast, metalen stellages en beslagen spiegels verminderenderadio-overdrachtook.

De radio-overdracht kan door sterke elektrische velden en andere zendontvangapparaten worden beïnvloed. Let erop dat u voldoende afstand houdt van: magnetrons, radiotelefoons, gsm's, zendontvangapparaten in het 2,4 GHz bereik, elektrische motoren en sterkstroomleidingen.

8. Montageenaansluitingvande camera

Bijafleveringisdecamerageschiktvoormontageaandemuurenaan plafond.

Voor muur- en plafondmontage

m.b.v.demeegeleverdeschroeven[18]enpluggen[16].

Draaidestatiefdraadvandehouderindedraad[11].

Richt decamera en draaide zijdelingsevastzetschroef aan dehouder van dedriehoekmoer[13]endevastzetschroef[9]vast.

Draaideantenne[7]naardeantennebus[10].

Draaideantennes.v.p.voorzichtigzo,datzeverticaalomhoogstaat.

Verbind dekleine spanningsstekker van denettransformator [17] met de bedrijfsspanningsbus[15]vandecamera.

Steekdenettransformatorineengeschiktstopcontact.

DePOWERLED[2]begintroodtebranden.

Verbindingsopbouw

De extra camera en de smartrecorder DF400R moeten aan elkaar gekoppeld worden (pairing) om een radioverbinding op te bouwen. De in de DF400 Set aanwezige camera's zijn in defabriek al gekoppeld aan kanaal 1en 2van de smartrecorder. Als u een extra camera (tot max. 2 extra camera's) aan de smartrecorderwiltverbinden,gaatualsvolgttewerk:

SelecteerinHoofdmenu“Koppelen”([49]-Camera-instellingen).

Klikophetcamerakanaaldatuwiltparen.

Drukbinnen35secondenopdepairing-toets[14]opdecamera.

bevestig de houder [8] van de camera

10. Onderhoudenreiniging

Deapparatenzijnonderhoudsvrij:Maakzedaaromnooitopen.

Controleerregelmatigdetechnischeveiligheidendefunctie.

Koppel de nettransformatoren af van het stopcontact voordat u ze schoonmaakt.

Vanbuiten mogende apparatenalleen meteen zachte,iets vochtigedoek ofkwastwordenschoongemaakt.

11. Afvalverwijdering

Verpakkingsmateriaal en uitgewerkte apparaten niet Zomaar weggooien. Zorg dat ze milieuvriendelijk worden opgeruimd. Uw gemeentehuiskanuaanhetadres van demilieustraathelpen.

12. Conformiteitsverklaring

Hierbij verklaren wij, INDEXA GmbH, Paul-Bohringer-Str. 3, D - 74229 Oedheim, dat dit product DF400K in overeenstemming is met de principiële eisen en de andere relevante voorschriften van richtlijn 2014/53/EU. De conformiteitsverklaringbijditproductvindtuonderwww.indexa.de.

13. LegalNotices

This product or software may contain or make use of code under the GNU General Public License v2e.g. the linux kernel, the GNU LesserGeneral Public Licensev2.1ortheApachelicencev2.0.

Forfurtherinformationregarding licensetermsand– whererequiredbylicense – source codesplease send an emailto copyrequest@indexa.de to getthem free ofcharge. Somelicenses, however,require the provisionof physicalcopies of the source code. Inthis case, you may obtaina copy of the source codesby contactingus aswell viacopyrequest@indexa.de. Anominal fee(i.e., thecost ofphysicallyperformingthesourcedistribution)willbechargedforthisservice.

your copyof thisproduct maynot containcode coveredby oneor moreof

Note: thelicens

Thecorrespondinglicensetextscanbefoundattheendofthe manual.

eslistedhere,dependingontheexactproductandversionyouchoose.

14. Garantie

Opdit apparaatgeeft tegenover de verkoper, nog 2 JAAR GARANTIE vanaf koopdatum (volgens aankoopbewijs) in overeenstemming met onderstaande voorwaarden. Deze garantieperiode geldt uitsluitend voor de eerste koper en kan niet worden overgedragen. Deze garantie geldt uitsluitend voor gebruik onder normale woonomstandigheden van een particulier huishouden. Uw wettelijke rechten worden door deze garantie niet beperkt. De garantie geldt uitsluitend voor materiaal- enfabricagefouten en isbeperkt tot ruil ofreparatie van de defecte apparaten. De garantieservice is in elkgeval beperkt tot de normale prijs van het apparaat. De garantie geldt niet voor slijtageonderdelen, batterijen en accu's. Deze garantie geldt uitsluitend op voorwaarde dat de bedienings- en onderhoudshandleidingen worden gevolgd. Schade die te wijten is aan misbruik, onjuistgebruik, externe invloeden,stof, vuil,water ofalgemeen aan afwijkende milieuomstandigheden, en schade die veroorzaakt is door overspanning, accu's, batterijen of een niet geschikte stroomvoorziening, zijn vandegarantieuitgesloten. De garantie vervalt, als reparaties of ingrepen werden uitgevoerd door personen diehiervoor nietgemachtigd zijn, ofals dit apparaat wordtuitgerust ofgebruikt metaanvullende onderdelenof toebehorendie nietop ditapparaat zijn afgestemd. Binnen de garantieperiode kunt u bij de bevoegde verkoper terecht voor informatie over de retourvoorwaarden. Retourzendingen dienen goed verpakt en franco huis te geschieden. Niet-geautoriseerde of ongefrankeerde zendingen worden niet aangenomen. Reparaties kunnen slechtsworden uitgevoerd,als eenuitgebreide beschrijvingvan hetprobleem is bijgevoegd.Retourneerbovendienalleen completesystemen.Na afloopvande garantieperiode zijn reparaties te betalen en niet altijd mogelijk. Garantiewerkzaamheden leidenniet toteen verlengingvan degarantietermijn en starten evenmin een nieuwe garantietermijn. De garantietermijn voor ingebouwde onderdelen eindigt met de garantietermijn voor het complete apparaat. Voor zover een aansprakelijkheid niet dwingend wettelijk is voorgeschreven, zijn verdergaande claims, met name met betrekking tot geleden personen- of zaakschade door het gebruik of door geen of een gebrekkigewerkingvanhetapparaat,uitgesloten.

Indexa GmbH, Paul-Böhringer-Str. 3, 74229 Oedheim, Duitsland

defabrikant aanvullendbij dewettelijke garantierechten

www.indexa.de

Wijzigingen voorbehouden

NL - 11

Operatinginstructions

1. Introduction

Read through these operating instructions fully and carefully. The operating instructions belong to this product and contain important points concerning bringing the appliance into service and ist operation. Also read the operating instructionsofthebasicset. Always pay attentionto all safetyinstructions. Should youhave any questions or be unsure about operating the appliance ask a specialist. Keep these instructions in a safe place and should theneed arise pass them on to a third party.

restricted physical,sensory or mentalcapacities, or alack ofexperience and/or knowledge,unless theyare supervisedby, orreceive instructionshow touse the appliancefromapersonresponsiblefortheirsafety.

3. Packagecontents

Camerawithconnectioncabletomainsadapter

Antenna

Mainsadapter5VDC

Camerabracketwithscrewsandplugs

Usermanual

(s.fig. A)

4. Technical data

2. Proper use

The additional wireless observation camera consists of camera DF400K and the mains adaptor. The additionalcamera is an optional accessory forDF400 Set. It is to be used for the surveillance of rooms, entrance hallways, driveways etc. through video pictures and sound. The video and audio transmission iswireless using afrequency of 2.4GHz. The power for the DF400K is supplied through the supplied mains adapter connectedtoa230VAC,50Hzmainssupply. If there is sufficient light a colour picture will be transmitted. At low ambient light levels theintegrated Infrared LEDsare automatically switched on.In this casethe immediatearea (max.14 m)will beilluminated andthe videopicture switches to black and white mode for improved light sensitivity. The picture quality is optimised for day and night opereation by an internal mechanical filter change. Ifthe surveillance isspecifically required in adark environment, thenadditionallightingshouldbeinstalled. Up tofour wireless camerasDF400K can beused withone smart recorder.The camera channels can be manually selected or automatically displayed in sequenceifthescan modeisselected. Theycanalso beviewedat thesametime onasplitscreen(varioussplitformatspossible). The wireless transmission is digital and on constantly changing frequencies (frequency hopping) which are synchronised between the camera and the smart recorder. Only the smart recorder which has been "paired" with the camera can receive the synchronised signals. This security feature prevents accessofthecamerasignalbythirdparties. The camera is weatherproof (Protection class IP66) and can be used not only indoorsbut alsofor mountingoutside. Whereverpossible itshouldbe protected from direct rainfall. The monitor and both mains adapters are for indoor use onlyandmustbeprotectedfrommoisture. The set is for use in private households. A video surveillance system does not replace your duty of care or supervision. Observe the regulations concerning videosurveillanceincommercialandpublicareas. Anyother useor modificationof thedevice isnot authorised.No liabilitywill be acceptedfor consequentialdamages orfor damagescaused byimproper useor incorrect operation. No liability will be accepted for consequential damages caused by any function or by malfunction. Unless any liability is specifically required by law, claims fordamages, in particular those for personalinjury or propertydamage causedby non-functioningor malfunctioningof themachine, areexcluded. This appliance is not intended to be used by people (including children) with

12 - GB

CameraDF400K

OperatingVoltage 5V DC (mainsadapter) Currentconsumption 500mA

Picturesensor 1/4”CMOS Viewingangle approx. 55°horizontal, approx.44°vertical Lightsensitivity 1Lux(w/oIR-LEDs) Infraredfilter automatic change Illumination 6Infrared LEDs Illuminationdistance max.14 m Microphone builtin Protectionclass IP66 Dimensionofhousing 123 xØ60mm Operatingtemperature - 10°C to+40°C

MainsAdapter

OperatingVoltage 230V~50Hz Output 5V , 1,0A

5. FeaturesandEquipment

1 Motionsensor 2 PowerLED 3 InfraredLEDs 4 Daylightsensor 5 Lens 6 Connection-LED 7 Antenna 8 Bracket 9 Wingscrew 10 Antenna connection 11 Fixing holeforbracket 12 Microphone 13 Triangularnut 14 Pairingbutton 15 Mains adapterconnection 16 Plugs 17 Mains adapter 18 Screws

(s.fig. A)

6. Safetyinstructions

The following instructions are provided for your safety andsatisfaction during operation of the device. Note thatnon-observance of these safety instructions results insignificant risks ofaccident.

Danger!

Do not leave small children unsupervised with the device, packaging material or small parts. Otherwise there is a risk of fatal injury due to choking orsuffocation.

Do not damage any gas, electricity, water or telecommunication lines during drilling and fixing work. Otherwise there are dangers of fire, personal andfatal injury.

Treat the cablescarefully. Lay these sothat they cannot bedamaged and do not present any tripping hazard. Otherwise there are dangers of fire, personal andfatal injury.

If you use the device for monitoring babies or small children ensure that the camera and cable are out of reach of children. Otherwise there is a risk tolife and limb!

Do not pull the cables over sharp edges and do not crush or crimp them elsewhere. Otherwisethere are dangersof fire, personaland fatalinjury.

Prevent the device from coming into contact with moisture and do not submerge inwater. Otherwise thereis a dangerof fatal injury.

Only operate the device from the supplied power supply. Before connecting the power supply to the mains, ensure that the mains current complies with 230 V ~, 50 Hz and is fitted with a fuse according to regulations. Otherwisethere are dangersof fire andfatal injury.

Attention!

of damage.

Protect the equipment and the cables against strong magnetic or electrical fieldsand against strongmechanical loads andvibrations.

Do not place the equipment near fire, heat or in areas of high temperature.

Only use the equipment with the supplied original parts or original accessories.

Do not connect any damaged device (e.g. damage in transit). Repairs to the equipmentmust only beperformed by specialists.

Remove the mains adapter from the mains outlet when the device is not required fora longer time.

If thispoint is notheeded life andhealth is endangered.

Non-observance of these instructions puts propertyat risk

7. Location of the camera

Before mounting the camera check the wireless reception from the desired location. Observethe following points:

Position the camera so that no direct light or sunshine falls on the lens otherwise the picture may become overexposed. Remember that the position of the sun changes. Check the camera image before mounting. Provisionally connect and commission the device and holdthe camera in the desired position. If necessary, change the camera position until you have foundthe desired view.

Select the distance between the camera and the subject according to the level ofdetail desired.

The camera has infrared illumination for the close range. This is

activated by the daylight sensor. You can improve the quality of the image at night by using additional illumination. The camera automatically switches to black and white in low light conditions and in artificial light.

If you want to install the camera outdoors, then protect the camera against direct rainfall if possible. The mains adapter must be in a dry location. The connection between camera and mains adapter cable must be protectedagainst moisture.

Ensure thatthere is apossible cable routingat the installationlocation.

Position the camera such that the expected movement is across the sensor [1]. Movements across the sensor will be detected quicker than those towards the sensor (see Fig. B). Do not mount the camera near to, or point the camera towards heaters or ventilation, as the PIR sensor reacts towarmth.

The maximum range of the wireless signal is approx. 100 m (and up to 150 m in optimal conditions) with line of sight contact between camera and smart recorder. Within buildings the range is greatly reduced by walls and floors, in particular those made of steel reinforced concrete, to a maximum of 20 m. Metal housings, shelves and mirrors also blockthe wireless signal.

For night time viewing do notpoint the camera through window glass as the infraredlight will berefelected into theimage.

If motion dection is to be used, ensure that that there is no visible background motioneg. tree brancheswhich may movein the wind.

The wireless transmission can also be affected by strong electric fields and other wireless equipment. Ensure an adequate distance of the camera and receiver to microwave ovens, cordless phones, mobile phones, wireless devices in the 2.4GHz frequency band, electric motors and highvoltage devices orpower cables.

8. Installation and connection of the camera

The cameracan be wallor ceiling mounted.

For wallor ceiling installationmount the bracket[8] at asuitable location usingthescrews[18]andifnecessarythewallplugs[16] provided.

Screw the bracket into the appropiate threaded hole [11] in the camera housing.

Adjust the angleof the camerato give therequired view andthen tighten thetriangularnut[13]andthewingscrew[9].

Screw the antenna [7] into the antenna connection [10] so that the antennaisinanuprightposition.

Connectthe DC-plugof themains adaptercable [17]to themains adapter connection[15]ofthecameracable.

Connectthemainsadapterwithasuitablemainsoutlet.

ThePOWERLED[2]lightsred.

GB - 13

9. Connectionpairing

The additional camera and the smart recorder DF400R must be paired with each other to establish the wireless connection. The cameras delivered in the DF400 Set are already paired with thesmart recorder on channel 1 and 2. In order to connect an additional camera to the smart recorder (maximum 2 additionalcameras)proceedasfollows:

Select“Pairing”([49] -CameraSettings)usingthedirectionbuttons.

Tapthecamera channelnumbertowhichanewcamerashouldbepaired.

Pressthepairingbutton[14]ofthecamerawithin35seconds.

10. Maintenance and cleaning

The productsare maintenance-free: donot open thehousings

Check thesafety and functionregularly

Remove themains adapters fromthe mains socketsbefore cleaning

Use asoft, slightly moistcloth or brushto clean thesurfaces

11. Disposal

Packaging material or electrical products must not be disposed of as household waste. Use your recycling system. Details are available from yourlocal authority.

12. Declaration of conformity

Indexa GmbH , Paul-Böhringer-Str. 3, D- 74229 Oedheim declares that this product DF400K complies with the basic requirements and the other relevant regulations of Directive 2014/53/EU. Conformity has been demonstrated. The completedeclaration of conformitycan be readat: www.indexa.de

households. It only covers manufacturing defects and is limited to the replacement or repair of the faulty components. It does not include wear and tear,orbatteries. The warrantyapplies only whenthe product is usedaccording to the operating instructions.It doesnot coverdamage arisingfrom misuse,improper handling, application of force, dust, dirt, water or other environmental factors, or from incorrectvoltagefrombatteriesorpowersupply. The warranty is void when the product has been repaired or tampered by unauthorised persons and when it has been used with components which are notspecifiedbythemanufacturer. In case of a warranty claim please contact the vendor for details of how to proceed and how to return the product if necessary. Only carriage paid authorised returns will be accepted. Repairs can only be accepted when accompanied by a full description of the fault. After the warranty period has expiredrepairswill bechargedand arenot alwayspossible.Warranty claimsdo not extendthe warranty periodand the warrantyfor replacement parts expires withthewarrantyfortheproduct. Unless there is a statutory obligation, the manufacturer is not responsible for further claims,including peronal ormaterial damages, arisingfrom the useof theproductorfromnonfunctionormisfunctionoftheproduct.

Indexa GmbH

Paul-Böhringer-Str. 3

74229 Oedheim

Germany

www.indexa.de

Subject to change

13. Legal Notices

This product or software may contain or make use of code under the GNU General Public License v2e.g. the linux kernel, the GNU LesserGeneral Public Licensev2.1ortheApachelicencev2.0.

Forfurtherinformationregarding licensetermsand– whererequiredbylicense – source codesplease send an emailto copyrequest@indexa.de to getthem free ofcharge. Somelicenses, however,require the provisionof physicalcopies of the source code.In this case, you may obtaina copy of the source codesby contactingus aswell viacopyrequest@indexa.de. Anominal fee(i.e., thecost ofphysicallyperformingthesourcedistribution)willbechargedforthisservice.

your copyof thisproduct maynot containcode coveredby oneor moreof

Note: thelicenseslistedhere,dependingontheexactproductandversionyou choose.

Thecorrespondinglicensetextscanbefoundattheendofthe manual.

14. Warranty

In addition to the statutory guarantee from the vendor, the manufacturer warrants this product for 2 years from date of purchase (proof from receipt) according to following conditions.This warranty does not affect your legal rights. The warranty covers use of the product in normal conditions in private

14 - GB

Manualediistruzioni

1. Introduzione

Leggere attentamente e completamente il presente manuale di istruzioni. Il manuale delle istruzioni fa parte di questo prodotto e contiene indicazioni importantiperlamessainfunzioneelamanipolazione. Leggereattentamenteecompletamenteilmanualediistruzionidelsetdibase. Osservare sempretutte le indicazionidi sicurezza. In casodi dubbisull'utilizzo dell'apparecchio,consultareuntecnicospecializzato. Conservarequestomanualeconcuraepassarloeventualmenteaterzi.

seguitedaunapersona responsabiledellalorosicurezza ononricevano daessa indicazioni su come utilizzare l'apparecchio. I bambini devono essere controllationdeevitarechegiochinoconl'utensile.

3. Dotazionediserie

Telecameraconcavo dialimentazione

Antenne

Alimentatore5VCC

Supportoconmaterialedifissaggio

Manualediistruzioni

(vedifig.A)

2. Utilizzoconforme

Il telecamera di videosorveglianza via radio addizione è composto dalla telecamera DF400K e dal alimentatore. La telecamera addizione è un accessorio opzionalo per un DF400 Set. Serve per sorvegliare oggetti (ad es. locali, aree di accesso pedonali o automobilistiche) con immagini e suono. Il trasferimentodelle immaginie deisuoni alregistratore smartavviene senzafili confrequenzadi2,4GHz. L'alimentazione elettrica del DF400K avviene mediante gli alimentatori in dotazione,collegatiallacorrentediretea230V~AC,50 Hz. In caso di illuminazione sufficiente la telecamera trasmette un'immagine a colori. Se l'illuminazione ambientale è troppo debole, si accende automaticamente l'illuminazione a infrarossi integrata. Viene illuminata un'area finoa 14 metrie l'immagine video passain modalità bianco/nero per ottenereunasensibilità maggiore.Per ottimizzarela qualitàdell'immagineper giorno e notte, al momento della commutazione viene sostituito meccanicamenteunfiltrointerno. Se si desidera un monitoraggio nell'oscurità o con cattive condizioni di illuminazione,siconsigliaun'illuminazionesupplementare. Il registratore smart riesce aricevere immagini da fino a quattrovideocamere senza fili DF400K. I canali possono essere selezionati singolarmente manualmente oppure automaticamente in sequenza mediante una funzione scan. È possibile anche osservare le immagini contemporaneamente sullo schermodiviso(sonopossibilidiversemodalitàdiripartizione). Latrasmissioneradioavvienesubasedigitalesu frequenzealternate(hopping) sincronizzate fra telecamera e registratore smart. Può ricevere i segnali sincronizzati solo il registratore smart "accoppiato" con la telecamera. È presenteunafunzionediprotezionedall'ascolto. La telecamera è a prova di intemperie (grado di protezione IP66) e quindi è adattanonsolo alcontrollodi ambientiinterni, maancheper ilmontaggio edil controllo in ambienti esterni. L'alimentatore deve comunque essere protetto dall'umiditàedall'acqua. La telecamera Osservare lenorme inriferimento allavideosorveglianza inzone commerciali e pubbliche. Una video-sorveglianza non può sostituire l'obbligo dell'utente all'attenzione,allaprevenzioneoallasorveglianza. Ogni altro utilizzo o modifica all'apparecchio è da ritenersi non conforme e comporta notevoli pericoli di incidente. Il produttore nonrisponde per i danni derivanti da utilizzo non conforme o non corretto. Questo apparecchio non è adatto perpersone (compresii bambini),con limitatefacoltà fisiche,sensoriali opsicologiche osenza esperienzae/o senzaconoscenza, ameno chenon siano

è concepita peril funzionamento in ambienti domesticiinterni.

4. Specifichetecniche

Telecamera DF400K

Tensionediesercizio 5V CC (alimentatore) Assorbimentodicorrente 500mA

Sensored'immagine 1/4" CMOS Angolodiimmaginetelecamera: ca.55°orizontale,ca.44°verticale Sensibilitàallaluce 1Lux(senzaIR-LED) Sensoridioscuramento 1-8Lux Illuminazione 6LEDainfrarossi Filtroinfrarossi sostituzioneautomatica L'immaginealbuio finoa14m Microfono Integrato Zipodiprotezione IP66 Dimensionialloggiamento 123 xØ 60mm Temperaturadiesercizio da-10°Ca+40°C

Alimentatore

Tensionediesercizio 230 V~50Hz Tensionediuscita 5V CC, 1,0A

5.Dotazione(vedifig. A)

1 Sensoredimovimento 2 PotenzaLED 3 LEDsainfrarossi 4 Sensoridioscuramento 5 Obiettivo 6 LEDpericollegamenti 7 Antenna 8 Supporto 9 Vitedifermo 10 Boccola antenna 11 Presa persupporto 12 Microfono 13 Dado triangolare 14 Tasto pairing 15 Attaccoalimentatore 16 Tasselli 17 Alimentatore 18 Viti

I-15

6. Avvertenzedisicurezza

Le seguenti istruzioni servono per la sicurezza e la soddisfazione dell'utente nell'utilizzo dell'apparecchio. Ricordare sempre che l'inosservanza delle istruzionicomportapericolidigraviincidenti.

Pericolo!

vitaesalute.

Non lasciare bambiniincustoditi con l'apparecchio,il materiale d'imballo olaminuteria!Rischiodisoffocamento!

Nei lavori di perforazione e fissaggio, fareattenzione a non danneggiare condutturedigas,corrente,acquao telecomunicazioni!Pericolodi vitaedi lesioni!

Maneggiare le condutture con attenzione! Posarle in modo che non possano subiredanni enon cisia pericolodi inciamparvi.Non tirarei cavi su bordiaffilati, enon schiacciarlie bloccarliin altromodo. Pericolo divita edilesioni!

Sorvegliando i bambini, fareattenzione che la telecamerae il cavo siano fuoridallaloroportata.Pericolodi vitaedilesioni!

Eviti che la memoria video e l'alimentatore vengano a contatto con l'umiditàenonimmergeremaigliapparecchiinacqua!Pericolodi vita!

Fare funzionare solo con il alimentatore in dotazione. Assicurarsi che prima del collegamento alla rete dell'alimentatore, la corrente di rete sia,secondo le prescrizioni, di 230 V~, 50 Hz e chesia presenteunfusibileanorma.

Attenzione!

dannimateriali.

Non collocare il dispositivo nelle vicinanze di fuoco, calore o ad alte temperaturecontinue!

Proteggere dasollecitazionimeccanicheeccessiveescossoni!

Proteggere daiforticampimagneticioelettrici!

Utilizzare solo con le parti originali fornite o gli accessori originali!

Primadel montaggioe dellamessa inesercizio, controllareche lafornitura nonpresentidanniechesiacompleta!

Se l'apparecchio non viene utilizzato per molto tempo, estrarre la spina dallapresaelettrica.

Non collegare un apparecchio danneggiato (ad es. per danni da trasporto). In caso di dubbio, chiedere al servizio clienti. Riparazioni ed interventi su possono essere svolti solo da personale specializzato.

16 - I

In caso di inosservanza di questa indicazione, pericolo per

la telecamera

In casodi inosservanzadi questaindicazione, pericolodi

ildispositivo ildispositivo

il dispositivo

dispositivo

7. Posizionamentodellatelecamera

Prima di montarela telecamera, studiare illuogo di montaggio. Provarese in questo luogo la telecamera funziona correttamente e controllare la trasmissioneradio.Osservareiseguentipunti:

Latelecamera deveessere montatain modoche lalucediretto oi raggidel sole colpiscano direttamente l'obiettivo perché ciò potrebbe compromettere l'immagine. Tenere conto che la posizione del sole non è costante. Controllare preferibilmente prima del montaggio l'immagine dellatelecamera.Atalescopomettere infunzionel'apparecchioetenere la telecamera nella posizione desiderata. Se necessario, modificare la posizionedellatelecamera,finoaquandol'inquadraturanonèottimale.

Selezionare ladistanza fratelecamera ooggetti secondoil riconoscimento dettaglidesiderato.

La telecamera possiede un'illuminazione ad infrarossi per le zone vicine. Questa viene attivata da sensori di oscuramento. Attraverso un'illuminazione ulteriore dell'ambientedi notte è possibilemigliorare la qualitàdell'immaginedellatelecamera.

Tenere presente che il luogo di montaggio della telecamera e del registratore smart dovrebbe essere esente da polvere e vibrazioni e che dovrebbeesserviunabuonaventilazione.

Fareattenzionechenellevicinanzenonvisiaunapresadirete.

Se la telecamera deve essere montata all'esterno, il luogo di montaggio dovrebbe essere protetto dalla pioggia diretta. L'alimentatore dovrebbe trovarsi in ambiente interno. I collegamenti dell'alimentatore devono essereprotettiinmodochenonvipossapenetrareumidità.

Tenere presente che vi sia un passaggio adeguato per il cavo di alimentazione.

Nonorientarelatelecameraperlaripresa notturnaversol'esternodalvetro diuna finestra,poiché l'immagineverrà disturbatadal riflessodella lucea infrarossi.

Se si desidera avviare le riprese automatiche mediante rilevamento di movimento, accertarsi che sull'immagine della telecamera non risulti alcun movimento dello sfondo, come ad es. alberi con i rami che si muovononelvento.

Impostare la telecamera in modo tale che il movimento più frequente avvenga in modo trasversale rispetto al sensore di movimento [1]. I movimenti trasversalirispetto al rilevatoredi movimento vengono rilevati più velocemente rispetto ai movimenti diretti verso il sensore (si veda la fig. B). Non montare la telecamera in prossimità di fonti di calore o bocchettedi aerazionee/o nonorientarle versodiesse, poichéil sensoredi movimentoreagiscealcalore.

La portata massima della trasmissione radio èdi circa 100 m (in caso di condizioni ottimali fino a 150 m) con contatto visivo fra telecamera e registratore smart. Negli edifici, la portata viene ridotta notevolmente dallepareti(in particolarequelle dicemento) edai soffitti,(circa 20m).Le superfici di lamiera, ad es. frigorifero, ripiani in lamiera e specchi schermanolatrasmissioneradio.

La trasmissione radio può essere compromessa da forti campi elettromagnetici e altre apparecchiature radio. Tenere conto che vi deve essere una sufficiente distanza con: forni a microonde, radiotelefoni, cellulari, apparecchi radio nella gamma 2,4 GHz, motori elettrici e linee dell'altatensione.

8. Montaggio e collegamento della

telecamera

Latelecameraèadattaalmontaggioapareteoppuresuunsoffitta.

Perilmontaggio aparete o susoffitto fissi ilsupporto [8] dellatelecamera conl'aiutodellevitifornite[18]edeitasselli[16]sulposto desiderato.

Avvitarelafilettaturadel sostegno[11]nelsupporto.

Orientare latelecamera e avvitarela vite difissaggio lateralesul supporto deldadotriangolare[13]elavitedibloccaggio[9].

Avvitarel'antenna[7] sullaboccola[10].

Ruotar lacondelicatezzainposizioneverticale.

Collegare il connettore della bassa tensione dell'alimentatore [17] alla presadellatensionediesercizio[15]dellatelecamera.

Inserirel'alimentatoreinunapresadirete.

IlLEDPOWER[2]siaccende.

9. Creazionedelcollegamento

Le telecamereaddizione contenutenel setsono giàaccoppiate difabbrica coni canali1 e2 delregistratore smart.Se sicollega unatelecamera addizione(fino a massimo2 telecamere aggiuntive)con il , procedere come segue:

Nel menu principale, selezionare “Accoppiamento” ([49] - Impostazioni dellatelecamera).

Cliccaresulcanaledellatelecamerachesidesideraaccoppiare.

Premereentro35secondiiltastodipairing[14]sullatelecamera.

registratore smart

10. Manutenzioneepulizia

Questi apparecchi sono esenti da manutenzione. Per questo motivo non devonomaiessereaperti.

Controllareregolarmentelasicurezzatecnicaedilfunzionamento.

Primadi pulirli,scollegarlidall'alimentazioneelettrica.

Pulirel'esternodegli apparecchicon unpanno morbido,appena inumidito ounpennello.

11. Smaltimento

Non gettare i materiali di imballo o gli apparecchi obsoleti tra i rifiuti domestici,ma riciclarli.Chiedere alComune leinformazioni sulcentro di raccoltaodiriciclaggioacuirivolgersi.

12. Dichiarazionediconformità

Con la presente, INDEXA GmbH, Paul-Böhringer-Str. 3, D - 74229 Oedheim, dichiarache questoprodotto DF400Kè conformeai requisitidi basee allealtre specifiche della direttiva 2014/53/EU. La dichiarazione di conformità del presenteprodottoèreperibilesulsitowww.indexa.de.

Se si desiderano maggiori informazioni sulle condizioni di licenza e (nella misura incui ciòsia richiestodalla licenza)per ricevere gratuitamenteil codice sorgente, si prega di inviare un'email all'indirizzo copyrequest@indexa.de. Alcunelicenzerichiedono lafornitura dicopie fisichedel codicesorgente. Anche in questocaso, èpossibile ricevereuna copiadel codicesorgente inviandouna richiesta all'indirizzo copyrequest@indexa.de. Per la suddetta prestazione, fattureremoal richiedentei costinominali connessi(ovvero icosti necessariper larealizzazionefisicadellamessaadisposizionedelcodicesorgente). Avvertenza: copia delprodotto potrebbenon contenere alcuncodice sottouna opiù licenze quielencate. Irelativitestidellelicenzesitrovanoallafinedelleistruzioniperl'uso.

A seconda delprodotto e dellaversione che avete scelto,la vostra

14. Garanzia

Oltre alla garanzia di legge, per questo apparecchio il produttore offre all'acquirente, alle condizioni riportate di seguito, una GARANZIA DI 2 ANNI dalla data d'acquisto (comprovata dalla ricevuta d'acquisto). Tale termine di garanzia vale soloper il primo acquirentee non è cedibile.Tale garanzia vale solo per l'utilizzo in condizioni abitative normali all'interno di abitazioni private. I diritti sanciti dalla legge non vengono limitati da tale garanzia. La garanzia è valida solo per difetti di materiale e costruzione ed è limitata alla sostituzioneo riparazionedegli apparecchidifettosi. Laprestazione digaranzia è limitata in ogni caso al normale prezzo commerciale dell'apparecchio. La garanzia non vale per le parti soggette a usura, le batterie né le batterie ricaricabili. Talegaranzia vale soloqualora venganorispettate le istruzioniper l'uso e la manutenzione. Sono esclusi dalla garanzia i danni riconducibili ad abusi, utilizzo inappropriato, agenti esterni, polvere, sporcizia, acqua o, in generale, a condizioni ambientali anomale così come i danni causati da sovratensioni, batterie ricaricabili, batterie o da un'alimentazione di corrente non idonea. Qualora vengano effettuate riparazioni o interventi da parte di persone non autorizzate o qualora l'apparecchio venga dotato di o utilizzato con parti aggiuntive o accessorie non adatte all'apparecchio, la garanzia decade. Duranteil periodo digaranzia informarsisulle modalità dispedizione di ritorno presso la ditta responsabile della vendita. Le spedizioni di ritorno devono essere ben imballate e devono avvenire franco destinazione. Non si accettano spedizioni non autorizzate o non affrancate.Le riparazioni possono essere eseguite solo quando è inclusa una descrizione dettagliata del difetto. Inoltre vannorispediti solo sistemicompleti. Scaduto il periododi garanzia, le riparazioni sonoa pagametoe nonsempre possibili.Le prestazionidi garanzia nonimplicanonéunprolungamentodelperiododi garanzianédannooriginea un nuovo periodo di garanzia. Il periodo di garanzia per le parti di ricambio montateterminaconilperiododigaranziageneraledell'apparecchio. Se lalegge non prevedeun'assunzione diresponsabilità cogente,sono escluse ulteriori rivendicazioni, in particolare in relazione a danni subiti da cose o persone durante l'utilizzo o per il mancato funzionamento o il malfunzionamentodell'apparecchio.

13. Notelegali

Questo prodotto o software può contenere o utilizzare un codice sotto la GNU GeneralPublic Licensev2, comead esempioil kernelLinux, sottola GNULesser GeneralPublicLicense v2.1osotto lalicenzaApachev2.0.

Indexa GmbH

Paul-Böhringer-Str. 3

74229 Oedheim

Germania

www.indexa.de

Con riserva di modifiche

I-17

LegalNotices

Thisproduct orsoftware maycontain ormake useofcode underthe GNUGeneral PublicLicense v2e.g. thelinux kernel,theGNU LesserGeneral Public Licensev2.1 orthe Apachelicence v2.0.

For furtherinformation regardinglicense termsand –whererequired bylicense –source codesplease sendan emailto copyrequest@indexa.deto getthem freeof charge.Some licenses,however, require the provision of physicalcopies of the source code. In thiscase, you may obtain a copyof the source codes bycontacting usas wellvia copyrequest@indexa.de.A nominal fee(i.e., thecost ofphysically performingthe sourcedistribution)will becharged forthis service.

your copyof thisproduct maynot containcode coveredby oneor moreof thelicenses listedhere,

Note: dependingon theexactproduct andversion youchoose.

GNU GENERAL PUBLIC LICENSE Version 2, June 1991Copyright (C) 1989, 1991 Free Software Foundation, Inc. 51 FranklinStreet, Fifth Floor, Boston, MA 02110-1301,USA Everyone is permitted to copy anddistribute verbatimcopies ofthis licensedocument, butchanging itis notallowed. PreambleThe licenses formost softwareare designedto takeaway yourfreedom toshare andchange it. Bycontrast, the GNU General Public License isintended to guarantee yourfreedom to share andchange free software--to make sure the software is free for all its users. This General Public License applies to most of the Free Software Foundation'ssoftware and toany other programwhose authors committo using it.(Some other Free Software Foundationsoftware is covered bythe GNU Lesser GeneralPublic License instead.)You can apply itto yourprograms, too. Whenwe speakof freesoftware, weare referring tofreedom, notprice. Our General Public Licenses are designedto make sure that you have the freedom to distributecopies of free software (and chargefor this service if youwish), that you receivesource code or canget it if you wantit, that you canchange the software or usepieces of it in newfree programs; and thatyou know you can do thesethings. Toprotect yourrights, weneed tomake restrictionsthat forbidanyone todeny youthese rights or to ask you to surrender the rights. These restrictions translate to certain responsibilities for you if you distribute copiesof the software,or ifyou modify it.Forexample, ifyou distribute copiesof such aprogram, whether gratis or fora fee, you must give therecipients all the rights that youhave. You must makesure that they,too, receive orcan getthe source code.And you mustshow themthese terms sothey know their rights. Weprotect yourrights withtwo steps:(1) copyrightthe software,and (2)offer youthis licensewhich gives youlegal permissionto copy,distribute and/ormodify thesoftware. Also,for eachauthor's protection and ours, we want to make certain that everyone understands that there is no warranty for this free software. If the softwareis modified by someone elseand passed on, we want itsrecipients to know that what theyhave isnot the original,so thatany problemsintroduced byothers will notreflect onthe original authors' reputations. Finally, any free program is threatened constantly by software patents.We wish to avoid the danger that redistributors of a free program will individually obtain patent licenses, in effect making the programproprietary. To preventthis, we have madeit clear that anypatent must be licensed for everyone'sfree use ornot licensed atall.The precise termsand conditions forcopying, distribution and modificationfollow. TERMSAND CONDITIONSFORCOPYING, DISTRIBUTIONANDMODIFICATION

0. ThisLicense applies toany program orother work whichcontains a noticeplaced by thecopyright holder saying itmay bedistributed underthe termsof thisGeneral Public License.The "Program", below,refers to any suchprogram or work,and a "workbased on theProgram" meanseither theProgram orany derivative work undercopyright law:that isto say,a workcontaining the Program or aportion of it,either verbatimor with modifications and/ortranslated into another language.(Hereinafter, translation isincluded without limitation in the term "modification".) Each licensee isaddressed as "you".Activities other than copying, distribution andmodification arenot covered bythis License;they areoutside its scope.The actof running the Program is notrestricted, and the output from the Program is covered onlyif its contents constitute a work basedon the Program(independent of havingbeen made byrunning the Program). Whether that is truedepends onwhatthe Programdoes.

1. You may copy and distribute verbatim copies of the Program's source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright noticeand disclaimer ofwarranty; keep intactall the noticesthat refer tothis License andto the absence ofany warranty;and give anyother recipientsof thePrograma copyof thisLicense alongwith the Program. You maycharge afee forthe physicalact oftransferring acopy, andyou mayat youroption offer warrantyprotection inexchangefor afee.

2. You may modifyyour copyor copiesof theProgram orany portionof it, thusforming awork basedon the Program,and copy anddistribute such modificationsor workunder theterms ofSection 1above, provided that youalso meet all ofthese conditions: a)You mustcause the modifiedfiles to carryprominent notices stating that you changed the files and the date of any change. b) You must cause any work that you distribute orpublish, thatin wholeor inpart containsor isderived fromthe Programor anypart thereof,to be licensed as a whole atno charge to all third parties under the termsof this License. c) If the modified program normally reads commands interactively when run, you must cause it, when started running for such interactive use in the most ordinary way, to print or display an announcement including an appropriate copyright notice and a notice that there is no warranty (or else, saying that you provide a warranty) andthat usersmay redistribute theprogram underthese conditions, andtelling theuser howto view a copyof this License.(Exception: if theProgram itself isinteractive but doesnot normally printsuch an announcement, your work based on the Program is not required to print an announcement.)These requirements apply to the modified work asa whole. If identifiable sections of that work arenot derived from theProgram, and canbe reasonably consideredindependent andseparate works inthemselves, then

this License,and itsterms, do notapply to thosesections when youdistribute themas separateworks. But when you distribute the same sections as part of a whole which is a work based on the Program, the distribution ofthe whole mustbe onthe terms ofthis License,whose permissionsfor other licenseesextend to theentire whole, andthus to each andevery part regardlessof who wroteit. Thus, itis not theintent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the Program. In addition, mere aggregation of anotherwork not based on the Program with the Program (or with awork based on the Program) on a volume of a storage or distribution medium does not bring the other work underthe scopeofthis License.

3. You may copy and distribute the Program (or a work based on it, under Section 2) in object code or executable formunder theterms of Sections1 and 2above provided thatyou alsodo oneof thefollowing: a) Accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or,b) Accompany it witha written offer,valid forat least threeyears, to giveany third party, for a charge no more than your cost of physically performing source distribution, a complete machinereadable copy of the corresponding source code, to be distributed under the terms of Sections 1 and 2 above on a medium customarilyused for software interchange; or, c) Accompany it withthe information you received as to the offer to distribute corresponding source code. (This alternative is allowed only for noncommercial distribution and only if you received the program in object code or executable form with such an offer,in accord with Subsectionb above.)The source codefor a work means thepreferred form of the workfor makingmodifications toit. Foran executable work,complete sourcecode meansall thesource codefor allmodulesit contains,plusany associatedinterfacedefinition files,plus thescripts usedto control compilationand installationof theexecutable. However,as aspecial exception,the sourcecodedistributed need not include anything that is normally distributed (in either source or binary form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component itselfaccompanies the executable. If distributionof executable or objectcode is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from thesame placecounts as distributionof thesource code,even though thirdparties are notcompelled tocopy thesourcealong withtheobject code.

4. Youmay notcopy, modify,sublicense, ordistribute the Program exceptas expresslyprovided underthis License. Any attempt otherwise to copy, modify, sublicense or distribute the Program is void, and will automatically terminate your rights under this License. However, parties who have received copies, or rights, fromyou underthis Licensewill nothave theirlicenses terminatedso longas suchparties remainin fullcompliance.

5. You arenot required to accept this License,since you have not signedit. However, nothing else grants you permissionto modify ordistribute theProgram or itsderivative works.These actions areprohibited by law if you do not accept this License. Therefore, by modifying or distributing the Program (or any work based on the Program), you indicate your acceptance of this License to do so, and all its terms and conditionsfor copying,distributingor modifyingtheProgram orworks basedon it.

6. Eachtime you redistributethe Program (orany work basedon the Program), therecipient automatically receives alicense from theoriginal licensor tocopy, distributeor modify theProgram subject tothese terms and conditions.Youmay notimpose anyfurther restrictionson therecipients' exerciseof therights granted herein.You arenot responsiblefor enforcingcompliance bythird partiesto thisLicense.

7. If,as aconsequence ofa courtjudgment orallegation ofpatent infringementor forany otherreason (not limited topatent issues),conditions are imposedon you(whether bycourt order,agreement or otherwise) that contradict theconditions of thisLicense, they do notexcuse you fromthe conditions of thisLicense. If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, thenas a consequence youmay not distribute theProgram at all.For example, if a patent license wouldnot permit royalty-free redistributionof the Program byall those who receivecopies directly or indirectlythrough you, then theonly way you couldsatisfy both it andthis License would beto refrain entirely from distribution of the Program. If any portion of this section is held invalid or unenforceable under any particularcircumstance, the balance of thesection is intended to applyand the section asa wholeis intended toapply inother circumstances.It isnot thepurpose of thissection toinduce you to infringe any patents or other property right claims or to contest validity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution system, which is implemented by public license practices. Many people have made generous contributions to the wide range ofsoftware distributed throughthat system inreliance onconsistent application ofthat system; itis up tothe author/donorto decideif heor sheis willingto distributesoftware throughany othersystem anda licensee cannotimpose thatchoice. Thissection is intendedto makethoroughly clearwhatis believedto be aconsequence oftherest ofthisLicense.

8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces, the originalcopyright holder who places the Program under this Licensemay add an explicit geographicaldistribution limitation excludingthose countries, so thatdistribution is permitted only in or among countries not thus excluded. In such case, this License incorporates the limitation as if writtenin thebodyof thisLicense.

9. The Free Software Foundation may publish revised and/or new versions of the General PublicLicense from timeto time.Such new versionswill be similarin spirit tothe presentversion, butmay differin detail toaddress newproblems orconcerns. Eachversion isgiven adistinguishing versionnumber. Ifthe Program specifies aversion number ofthis License whichapplies to itand "any laterversion", youhave theoption of following the terms and conditions either of that version or of any later version published by the Free

Software Foundation.If theProgram doesnot specifya versionnumber ofthis License,you maychoose any versionever publishedbythe FreeSoftwareFoundation.

10. Ifyou wish to incorporateparts of theProgram intoother free programswhose distribution conditions are different, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation,write to theFree Software Foundation;we sometimes makeexceptions for this.Our decision will beguided by thetwo goals ofpreserving the freestatus of allderivatives of our freesoftware andof promotingthesharing andreuseof softwaregenerally. NOWARRANTY

11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THECOPYRIGHT HOLDERS AND/OROTHER PARTIES PROVIDETHE PROGRAM "ASIS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THEQUALITY AND PERFORMANCE OF THE PROGRAM ISWITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE,YOU ASSUME THECOST OFALL NECESSARY SERVICING,REPAIR ORCORRECTION.12. IN NO EVENTUNLESS REQUIRED BYAPPLICABLE LAW OR AGREEDTO IN WRITING WILLANY COPYRIGHT HOLDER, ORANY OTHERPARTY WHOMAY MODIFYAND/OR REDISTRIBUTETHE PROGRAMAS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGESARISING OUT OFTHE USE ORINABILITY TO USETHE PROGRAM(INCLUDING BUT NOTLIMITED TO LOSSOF DATAOR DATA BEINGRENDERED INACCURATE ORLOSSES SUSTAINEDBY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.ENDOF TERMSANDCONDITIONS

GNU LESSER GENERALPUBLIC LICENSE

Version 2.1, February 1999 Copyright(C) 1991, 1999 Free Software Foundation,Inc. 51 FranklinStreet, Fifth Floor,Boston, MA 02110-1301USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.[Thisis thefirstreleased versionofthe LesserGPL.It alsocounts asthe successorofthe GNULibrary PublicLicense, version2, hencethe versionnumber 2.1.] Preamble The licensesfor most softwareare designedto takeaway your freedomto shareand changeit. By contrast, the GNU General Public Licenses are intended to guarantee your freedom to share and change free software--to makesure the softwareis free forall its users.This license, theLesser General Public License, applies to some specially designated software packages--typically libraries--of the Free Software Foundation and other authors who decide to use it. You can use it too, but we suggest you first think carefully about whether this license or theordinary General Public License is the better strategy touse in any particularcase, based onthe explanationsbelow. When wespeak offree software, weare referringto freedom ofuse, notprice. OurGeneral PublicLicenses aredesigned tomake surethat youhave thefreedom to distributecopies offree software(and chargefor thisservice ifyou wish);that youreceive sourcecode or can get it ifyou want it; that youcan change the software anduse pieces of it innew free programs; and that youare informedthat youcan dothese things.To protectyour rights,we needto makerestrictions that forbid distributors to deny you these rights or to ask you to surrender these rights. These restrictions translate to certain responsibilities for you if you distribute copies of the library or if you modify it. For example, if youdistribute copies ofthe library, whethergratis or fora fee, you mustgive the recipientsall the rights thatwe gave you. Youmust make sure thatthey, too, receive orcan get the source code.If you link other code with thelibrary, you must provide complete objectfiles to the recipients, so that theycan relink them with the library after making changes to the library and recompiling it. And you must show them these terms so they know their rights. We protect your rights with a two-step method: (1) we copyright thelibrary, and(2) weoffer youthis license,which givesyou legalpermission tocopy, distribute and/or modify the library. To protect each distributor, we want to make it very clear that there is no warranty for thefree library. Also,if the libraryis modified by someoneelse and passedon, the recipients should knowthat what theyhave isnot theoriginal version,so thatthe original author'sreputation will not be affected by problems that might be introduced by others. Finally, software patents pose a constant threat tothe existenceof anyfree program.We wish tomake surethat acompany cannoteffectively restrict the usersof afree programby obtaining arestrictive licensefrom apatent holder.Therefore, we insistthat any patent license obtained for a version of the library must be consistent with the full freedom of use specified in this license. Most GNU software, including some libraries, is covered by the ordinary GNU General Public License.This license, the GNU LesserGeneral Public License, applies tocertain designated libraries, and is quite different from the ordinary General Public License. We use this license for certain libraries inorder topermit linkingthose librariesinto non-freeprograms. When aprogram islinked witha library, whether statically or using a shared library, the combination of the two is legally speaking a combined work, a derivativeof the original library. Theordinary General Public Licensetherefore permits such linking only if the entire combination fits its criteria of freedom. The Lesser General Public License permits more lax criteria for linking other code with the library. We call this license the "Lesser" General PublicLicense becauseit doesLess to protectthe user's freedomthan theordinary GeneralPublic License.It also provides other free software developers Less of an advantage over competing non-free programs. These disadvantages are the reason we use the ordinary General Public License for many libraries. However, the Lesser license provides advantages in certain special circumstances. For example, on rare occasions, there maybe a specialneed to encouragethe widest possibleuse of a certainlibrary, so thatit becomes a de-facto standard. To achieve this, non-free programs must be allowed to use the library. A more frequent caseis that a free librarydoes the same jobas widely used non-free libraries.In this case,

there is little togain by limiting the free libraryto free software only, sowe use the Lesser General Public License. In other cases, permission to use a particular library in non-free programs enables a greater number ofpeople touse alarge bodyof freesoftware. Forexample, permissionto usethe GNU CLibrary in non-free programs enables many more people to use the whole GNU operating system, as well as its variant, the GNU/Linux operatingsystem. Although the Lesser GeneralPublic License is Less protectiveof the users'freedom, itdoes ensure thatthe userof aprogram that islinked withthe Libraryhas thefreedom and the wherewithal to run that program using a modified version of the Library. The precise terms and conditions forcopying, distributionand modificationfollow. Paycloseattention tothe differencebetween a "work based onthe library" anda "work that usesthe library". Theformer contains code derivedfrom the library,whereas thelattermust becombinedwith thelibrary inorder torun. TERMSAND CONDITIONSFORCOPYING, DISTRIBUTIONANDMODIFICATION

0. ThisLicense Agreement appliesto anysoftware library orother program whichcontains anotice placed by thecopyright holder orother authorizedparty sayingit may bedistributed underthe terms ofthis Lesser General Public License(also called "thisLicense"). Each licenseeis addressed as"you". A "library"means a collection of software functions and/or data prepared so as to be conveniently linked with application programs (whichuse some ofthose functionsand data) toform executables. The"Library", below,refers to any such software library or work which has been distributed under these terms. A "work based on the Library" means either the Library or any derivative work under copyright law: that is to say, a work containing the Library or a portion of it, either verbatim or with modifications and/or translated straightforwardly into another language. (Hereinafter, translation is included without limitation in the term "modification".)"Source code" for a work means the preferred form of the work for making modificationsto it.Fora library,completesource codemeansall thesourcecode forall modulesit contains, plus anyassociated interface definitionfiles, plus thescripts used tocontrol compilation andinstallation of the library.Activities other thancopying, distributionand modificationare notcovered by thisLicense; they are outsideits scope.The actof runninga programusing theLibrary isnot restricted,and outputfrom such a program iscovered only ifits contents constitutea work basedon the Library(independent of theuse of the Library in a tool for writing it). Whether that is true depends on what the Library does and what the programthat usestheLibrary does.

1. Youmay copyand distributeverbatim copiesof theLibrary's completesource codeas you receiveit, in any medium, providedthat youconspicuously andappropriately publish oneach copyan appropriatecopyright notice and disclaimerof warranty; keepintact all thenotices that referto this Licenseand to theabsence of any warranty; and distribute a copy of this License along with the Library. You may charge a fee for the physical act of transferringa copy, and you may atyour option offer warranty protection inexchange for a fee.

2. Youmay modify your copyor copies of theLibrary or any portionof it, thusforming a work basedon the Library, and copy and distribute such modifications or work under the terms of Section 1 above, provided that youalso meetall ofthese conditions:a) Themodified workmust itselfbe a softwarelibrary. b)You must cause the files modified to carry prominent notices stating that you changed the files and the date of any change. c) You must cause thewhole of the work to be licensed at no charge toall third parties under the terms of this License. d) If a facility in the modified Library refers to a function or a table of data to be supplied by an application program that uses the facility, other than as an argument passed when the facility is invoked, thenyou must make a good faitheffort to ensure that, inthe event an application does not supply such function or table, the facility still operates, and performs whatever part of its purpose remains meaningful.(For example, a function in a library to compute square roots has a purpose that is entirely well-defined independent of the application. Therefore, Subsection 2d requires that any application-supplied function or table used by this function must be optional: if the application does not supply it, the square root function must still compute square roots.)These requirements apply to the modified work asa whole. If identifiablesections of that workare not derived fromthe Library, and canbe reasonably considered independent andseparate works in themselves,then this License, and itsterms, do not apply tothose sections when youdistribute them as separateworks. But when youdistribute the same sections aspart ofa wholewhich isa workbased onthe Library,the distributionof thewhole mustbe onthe terms ofthis License,whose permissionsfor otherlicensees extendto theentire whole,and thusto eachand every part regardless ofwho wrote it. Thus, itis not the intent ofthis section to claim rights orcontest your rights to work written entirelyby you; rather, the intent isto exercise the right to controlthe distribution of derivative orcollective worksbased on theLibrary. Inaddition, mereaggregation ofanother work notbased on theLibrary withthe Library (orwith awork based onthe Library) on avolume of a storageor distribution medium doesnot bringthe otherwork under thescope ofthis License.

3. You mayopt to apply the termsof the ordinary GNU GeneralPublic License instead of thisLicense to a given copyof theLibrary. Todo this,you mustalter allthe noticesthat referto thisLicense, sothat they refer to the ordinary GNUGeneral Public License, version 2,instead of to this License. (Ifa newer version than version 2 of the ordinary GNU General Public License has appeared, then you can specify that version instead if youwish.) Do notmake any otherchange in these notices.Once this changeis made in agiven copy, it is irreversible forthat copy, so the ordinary GNUGeneral Public License applies toall subsequent copies and derivative worksmade from that copy. Thisoption is useful when youwish to copy part ofthe codeof theLibraryinto aprogramthat isnota library.

4. You maycopy and distributethe Library(or a portionor derivativeof it,under Section 2)in objectcode or executable form under the terms of Sections 1 and 2 above provided that you accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange. If distribution of object code ismade by offeringaccess to copyfrom a designatedplace, then offeringequivalent access tocopy the

source code fromthe same placesatisfies the requirement todistribute the source code,even though third parties arenot compelledto copythe sourcealong withthe objectcode.

5. A program that contains no derivative of any portion of the Library, but is designed to work with the Library bybeing compiledor linkedwith it,is calleda "workthat usesthe Library".Such awork, inisolation, is nota derivativework ofthe Library,and thereforefalls outsidethe scopeof thisLicense. However,linking a "work that uses the Library" with the Library creates an executable that is a derivative of the Library (because it contains portions of the Library), rather than a "work that uses thelibrary". The executable is therefore coveredby this License.Section 6states terms fordistribution of suchexecutables. Whena "work that usesthe Library" usesmaterial froma header filethat ispart of theLibrary, theobject codefor the work may bea derivativework ofthe Libraryeven thoughthe sourcecode isnot. Whetherthis istrue isespecially significant ifthe work canbe linkedwithout theLibrary, orif thework isitself alibrary. Thethreshold forthis to be true is not precisely defined by law.If such an object file uses only numerical parameters, data structure layouts and accessors, and small macros andsmall inline functions (ten lines or less in length), then the use of the object file is unrestricted, regardless of whether it is legally a derivative work. (Executables containing this object code plus portions of the Library will still fall under Section

6.)Otherwise, ifthe work isa derivativeof the Library,you maydistribute the objectcode forthe work under the termsof Section 6.Any executables containingthat work alsofall under Section6, whetheror not they arelinked directlywith theLibrary itself.

6. Asan exception tothe Sectionsabove, youmay also combineor linka "work thatuses theLibrary" with the Library to produce a work containing portions of the Library,and distribute that work under terms of your choice,provided thatthe termspermit modificationof thework forthe customer'sown use andreverse engineering fordebugging suchmodifications. Youmust giveprominent noticewith eachcopy of thework that theLibrary is usedin it andthat theLibrary and itsuse are coveredby this License.You mustsupply a copy ofthis License. Ifthe work duringexecution displayscopyright notices, youmust include thecopyright notice forthe Library amongthem, aswell asa referencedirecting the userto thecopy ofthis License. Also, you must do one of these things: a) Accompany the work with the complete corresponding machinereadable source code for the Library including whatever changes were used in the work (which must be distributed under Sections1 and 2 above); and,if the work is anexecutable linked with theLibrary, with thecomplete machine-readable"work thatuses theLibrary", asobject codeand/or sourcecode, sothat the user can modify the Library and then relink to produce a modified executable containing the modified Library. (It isunderstood that the user whochanges the contents of definitionsfiles in the Librarywill not necessarily beable to recompile theapplication to usethe modified definitions.)b) Use asuitable shared library mechanismfor linkingwith theLibrary. Asuitable mechanismis onethat (1)uses atrun timea copy of thelibrary already presenton the user'scomputer system,rather than copyinglibrary functions intothe executable, and (2)will operate properlywith a modifiedversion of thelibrary, if the userinstalls one, as long as the modified version is interface-compatible with the version that the work was made with. c) Accompany the workwith awritten offer, validfor atleast three years,to givethe same userthe materials specified in Subsection6a, above, fora charge nomore than the costof performing thisdistribution. d) If distribution ofthe workis madeby offeringaccess tocopy froma designatedplace, offerequivalent access to copy the above specifiedmaterials from the same place. e) Verify that the user hasalready received a copy ofthese materialsor thatyou havealready sentthis usera copy.For anexecutable, therequired form of the"work that usesthe Library" mustinclude any dataand utilityprograms needed forreproducing the executable from it. However, as a special exception, the materials to be distributed need not include anything that is normally distributed (in either source or binary form) with the major components (compiler, kernel,and so on)of the operatingsystem on whichthe executable runs,unless that component itself accompanies theexecutable.It may happen thatthis requirement contradicts thelicense restrictions of other proprietary librariesthat do not normally accompanythe operating system. Such acontradiction meansyou cannotuseboth themandthe Librarytogetherin anexecutable thatyou distribute.

7. You may place library facilities that are a work based on the Library side-by-side in a single library together with other library facilities not covered by this License, and distribute such a combined library, provided thatthe separatedistribution of thework basedon the Libraryand ofthe otherlibrary facilities is otherwise permitted,and providedthat youdo thesetwo things:a) Accompanythe combinedlibrary witha copy of the same work based on the Library, uncombined with any other library facilities. This must be distributedunder theterms ofthe Sectionsabove. b)Give prominentnotice withthe combinedlibrary ofthe fact that part of it is a work based on the Library, and explaining where to find the accompanying uncombinedform ofthesame work.

8. You may not copy, modify, sublicense, link with, or distribute the Library except as expressly provided under this License.Any attempt otherwise tocopy, modify, sublicense, link with,or distribute the Libraryis void, and will automatically terminate your rights underthis License. However, parties who have received copies, or rights,from you under thisLicense will nothave their licenses terminatedso long as suchparties remain infull compliance.

9. You arenot required toaccept thisLicense, since youhave notsigned it. However,nothing elsegrants you permission to modify ordistribute the Library or itsderivative works. These actions areprohibited by law if you donot acceptthis License. Therefore,by modifyingor distributingthe Library (orany workbased on the Library), you indicateyour acceptance of thisLicense to do so,and all its termsand conditions for copying, distributing ormodifying theLibrary orworks based onit.

10. Each timeyou redistribute the Library(or any work basedon the Library), therecipient automatically receives a license from the original licensor to copy, distribute, link with or modify the Library subject to these terms and conditions. You may not impose anyfurther restrictions on the recipients' exercise of the rightsgranted herein.Youare notresponsible forenforcing complianceby thirdparties withthis License.

11. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditionsof this License, they do notexcuse you from the conditions of this License. Ifyou cannot distribute soas to satisfysimultaneously your obligationsunder this Licenseand any other pertinentobligations, thenas aconsequence youmay notdistribute theLibrary atall. Forexample, ifa patent license would not permit royalty-free redistribution of the Library by all those who receive copies directly or indirectly through you, then the only way you couldsatisfy both it and this License would be to refrain entirelyfrom distribution ofthe Library. Ifany portion ofthis sectionis held invalidor unenforceable under any particular circumstance, the balance of the section is intended to apply, and the section as a whole is intended to apply in other circumstances. It is not the purpose of this section to induce you to infringe any patentsor other property rightclaims or to contestvalidity of any suchclaims; this section has the solepurpose ofprotecting the integrityof thefree softwaredistribution system whichis implementedby public license practices. Many people have made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system; it is up to the author/donor todecide if heor she iswilling to distributesoftware throughany other systemand a licensee cannot impose that choice. This section is intended to make thoroughly clear what is believed to be a consequence ofthe restof thisLicense.

12. If the distribution and/or use of the Library is restricted in certain countries either by patents or by copyrighted interfaces,the originalcopyright holder whoplaces theLibrary under thisLicense mayadd an explicit geographicaldistribution limitationexcluding thosecountries, so thatdistribution ispermitted only in oramong countries notthus excluded. Insuch case,this License incorporatesthe limitationas if written inthe bodyofthis License.

13. The Free Software Foundation may publish revised and/ornew versions of the Lesser General Public License fromtime totime. Suchnew versionswill besimilar inspirit to thepresent version,but maydiffer in detail to addressnew problems or concerns. Eachversion is given adistinguishing version number. If the Library specifies aversion number ofthis License whichapplies to itand "any laterversion", you have the option of followingthe terms andconditions either of thatversion or ofany later version publishedby the Free Software Foundation. If the Library does not specify a licenseversion number, you may choose any versionever publishedbythe FreeSoftwareFoundation.

14. Ifyou wishto incorporatepartsof theLibrary intoother freeprograms whosedistribution conditionsare incompatible withthese, writeto theauthor toask for permission.For softwarewhich iscopyrighted bythe Free SoftwareFoundation, writeto theFree Software Foundation;we sometimes makeexceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free softwareand ofpromotingthe sharingandreuse ofsoftware generally. NOWARRANTY

15. BECAUSETHE LIBRARYIS LICENSEDFREE OFCHARGE, THEREIS NOWARRANTY FORTHE LIBRARY,TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHERPARTIES PROVIDE THE LIBRARY"AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OFMERCHANTABILITY ANDFITNESS FORA PARTICULARPURPOSE. THEENTIRE RISKAS TO THE QUALITY AND PERFORMANCE OF THE LIBRARY IS WITH YOU. SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUMETHE COST OF ALL NECESSARYSERVICING, REPAIR ORCORRECTION.16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANYOTHER PARTYWHO MAY MODIFY AND/ORREDISTRIBUTE THE LIBRARYAS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE LIBRARY (INCLUDING BUT NOTLIMITED TO LOSSOF DATAOR DATA BEINGRENDERED INACCURATE ORLOSSES SUSTAINEDBY YOU ORTHIRD PARTIESOR AFAILURE OFTHE LIBRARYTO OPERATEWITH ANYOTHER SOFTWARE), EVEN IF SUCHHOLDER OROTHER PARTYHAS BEEN ADVISEDOF THEPOSSIBILITY OFSUCH DAMAGES.END OF TERMSAND CONDITIONS

Apache LicenseVersion 2.0

, January 2004http://www.apache.org/licenses/ TERMS AND

CONDITIONSFOR USE,REPRODUCTION,AND DISTRIBUTION

1. Definitions. "License" shall mean the terms and conditions for use, reproduction, and distribution as defined by Sections 1 through 9 of this document. "Licensor" shall mean the copyright owner or entity authorized by thecopyright owner thatis granting the License."Legal Entity" shallmean the union ofthe acting entity and all other entitiesthat control, are controlled by, or are under commoncontrol with that entity. For the purposes of this definition, "control" means (i) the power, direct or indirect, to cause the direction ormanagement ofsuch entity, whetherby contractor otherwise, or(ii) ownershipof fiftypercent (50%)or moreofthe outstandingshares,or (iii)beneficialownership ofsuchentity. "You"(or "Your")shall mean an individual or Legal Entity exercising permissions granted by this License. "Source" form shall mean the preferred form for making modifications, including but not limited to software source code, documentation source, and configuration files. "Object" form shall mean any form resulting from mechanical transformation or translation of a Source form, including but not limited to compiled object code, generated documentation, and conversions to other media types. "Work" shall mean the work of authorship, whether in Source or Object form, made available under the License, as indicated by a copyright noticethat isincluded inor attachedto thework (anexample isprovided inthe Appendixbelow). "Derivative Works" shall mean any work, whether in Source or Object form, that is based on (or derived from) the Work and for which the editorial revisions, annotations, elaborations, or other modifications represent, as a whole, an original work of authorship. For thepurposes of this License, Derivative Works shall not includeworks that remain separablefrom, or merely link(or bind by name)to the interfaces of,

the Work and Derivative Works thereof."Contribution" shall mean any work of authorship, including the original version ofthe Work and any modificationsor additions to that Workor Derivative Works thereof, that is intentionally submitted to Licensor for inclusion in the Work by the copyright owner or by an individual or Legal Entity authorizedto submit on behalf of the copyrightowner. For the purposes of this definition, "submitted"means anyform ofelectronic, verbal,or written communicationsent tothe Licensor or its representatives, includingbut not limited tocommunication on electronic mailing lists,source code control systems, and issue tracking systems that are managed by, or on behalf of, the Licensor for the purpose ofdiscussing andimproving theWork, butexcluding communicationthat isconspicuously marked orotherwise designatedinwriting bythecopyright owneras "Nota Contribution.""Contributor" shallmean Licensor andany individual orLegal Entityon behalf ofwhom aContribution has beenreceived byLicensor andsubsequently incorporatedwithinthe Work.

2. Grant ofCopyright License. Subjectto the terms andconditions of thisLicense, each Contributorhereby grants toYoua perpetual,worldwide, non-exclusive,no-charge, royalty-free,irrevocable copyrightlicense to reproduce,prepare DerivativeWorks of,publicly display,publicly perform,sublicense, anddistribute the Workand suchDerivativeWorks inSourceor Objectform.

3. Grant of Patent License. Subject to the terms and conditions of this License, each Contributor hereby grants toYou a perpetual,worldwide, non-exclusive,no-charge, royalty-free, irrevocable(except as stated in thissection) patent licenseto make,have made, use,offer tosell, sell, import,and otherwisetransfer the Work, where such license applies only to those patent claims licensable by such Contributor that are necessarily infringedby their Contribution(s)alone or bycombination of theirContribution(s) withthe Work to whichsuch Contribution(s) wassubmitted. If Youinstitute patent litigationagainst anyentity (including a cross-claimor counterclaimin alawsuit) alleging thatthe Work ora Contribution incorporatedwithin the Work constitutes director contributory patentinfringement, then anypatent licenses granted toYou under this Licensefor thatWork shallterminate asof thedate suchlitigation isfiled.

4. Redistribution. Youmay reproduce and distributecopies of the Work orDerivative Works thereof in any medium, withor withoutmodifications, andin Sourceor Objectform, providedthat Youmeet thefollowing conditions: 1.You must giveany other recipientsof theWork orDerivative Worksa copyof this License;and

2. You mustcause any modified filesto carry prominent noticesstating that You changedthe files; and 3. You must retain, in the Source form of any Derivative Works that You distribute, all copyright, patent, trademark, and attribution notices from the Source form ofthe Work, excluding those notices that do not pertain to any part of the Derivative Works; and 4. If the Work includes a"NOTICE" text file as part of its distribution, then anyDerivative Works that You distribute mustinclude a readable copyof the attribution notices contained within such NOTICE file, excluding those notices that do not pertain to any part of the Derivative Works,in at leastone of thefollowing places: withina NOTICE textfile distributed aspart of the Derivative Works;within theSource formor documentation,if providedalong withthe DerivativeWorks; or, within a display generated by the Derivative Works, if and wherever such third-party notices normally appear. Thecontents of theNOTICE file arefor informational purposesonly and donot modify theLicense. You may add Your own attribution notices withinDerivative Works that You distribute, alongside oras an addendum to the NOTICE text from the Work, providedthat such additional attribution notices cannot be construed as modifyingthe License. You mayadd Your owncopyright statement toYour modifications and may provide additional or different license terms and conditions for use, reproduction, or distribution of Your modifications, or for any such Derivative Works as a whole, provided Your use, reproduction, and distribution ofthe Workotherwise complieswith theconditions statedin thisLicense.

5. Submission of Contributions. Unless You explicitly state otherwise, any Contribution intentionally submitted for inclusion inthe Work by Youto the Licensor shall beunder the terms and conditions ofthis License, without any additional terms or conditions. Notwithstanding the above, nothing herein shall supersede or modify the terms of any separate license agreement you may have executed with Licensor regardingsuch Contributions.

6. Trademarks.This Licensedoes notgrant permission touse thetrade names,trademarks, service marks, or product names of the Licensor, except as required for reasonable and customary usein describing the originof theWorkand reproducingthecontent ofthe NOTICEfile.

7. Disclaimerof Warranty. Unlessrequired byapplicable law oragreed toin writing, Licensorprovides the Work (and each Contributorprovides its Contributions) on an "AS IS"BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied, including, without limitation, any warranties or conditions of TITLE,NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FORA PARTICULAR PURPOSE. You are solely responsible for determining the appropriateness of using or redistributing the Work and assumeany risksassociatedwith Yourexercise ofpermissions underthis License.

8. Limitation of Liability. In no event and under no legal theory, whether in tort (including negligence), contract, orotherwise, unlessrequired byapplicable law (suchas deliberateand grosslynegligent acts) or agreed to in writing, shall any Contributor be liable to You for damages, including any direct, indirect, special, incidental, or consequentialdamages of any character arisingas a result of thisLicense or out of the use or inability to use the Work (including but not limited to damages for loss of goodwill, work stoppage, computer failure or malfunction, or any and all other commercial damages or losses), even if suchContributor hasbeenadvised ofthepossibility ofsuch damages.

9. Accepting Warranty or Additional Liability. While redistributing the Work or Derivative Works thereof, Youmay chooseto offer,and charge afee for, acceptanceof support,warranty, indemnity,or otherliability obligations and/orrights consistent withthis License.However, inaccepting such obligations,You mayact only onYour ownbehalf andon Yoursole responsibility,not on behalfof any otherContributor, and onlyif You agreeto indemnify, defend,and holdeach Contributorharmless for anyliability incurredby, orclaims assertedagainst, suchContributorby reasonofyour acceptinganysuch warrantyoradditional liability.

ENDOF TERMSANDCONDITIONS

Indexa GmbH, Paul-Böhringer-Str. 3, D- 74229 Oedheim

Stand Legal Notices: 2016/10/25

Pentatech DF400K Operating Instructions Manual

Specifications and Main Features

Frequently Asked Questions

User Manual