Pentair Everpure HSD 440P User Manual

BENEFITS

APPLICATION/SIZING

INSTALLATION TIPS

OPERATION TIPS

EV9344-00

HSD 440P Self Flushing Filter

Automatic self cleaning high capacity filter maximizes the life of carbon filters and extends cartridge change intervals

High capacity sub-micron filter maximizes the life of carbon filters and extends cartridge change intervals

Patented multi-bore bundle incorporates hollow fiber ultra-filtration membrane technology for highly effective removal of colloidal particulates from water

Provides bacteria and virus reduction

Efficient programmable automatic flushing technique extends the life of the membrane element while using very little water for cleaning

Use minimum 1/2” water line (inlet connection is 3/4”)

Refer to Installation, Operation & Service Manual for complete installation and start-up instructions

HSD 440 Automatic Self Flushing filter:

Part No. EV9344-00

Replacement HSD Cartridge:

Part No. EV9344-70

Refer to Installation, Operation & Service Manual for programming details and operation tips

With proper operation and flushing procedures, the ultra-filtration membrane cartridge can provide 3-5 years of trouble-free service

Advanced, industry proven microprocessor controller provides expanded programming options and control flexibility, including override or vacation mode

Integral flow meter provides information on total volume of water processed. Can interface with programmable controller to enable more precise flushing cycle control

Designed specifically for foodservice applications

For high volume and/or high turbidity installations where longer intervals between filter cartridge replacements are desired

Refer to Installation, Operation & Service Manual for application and sizing details

7.40 in

12.85 in

16.46 in

53.12 in

10.57 in

3.61 in

Overall Dimensions:

53.12” H x 16.46” W x 10.57” D

Inlet connection: 3/4" NPT

Outlet connection: 3/4" NPT

Drain connection: 3/4" NPT

Service Flow Rate: Maximum 10 gpm (38 Lpm)

Operating Pressure Requirements: 20-60 psi recommended inlet pressure 120 psi maximum inlet pressure

HSD 440P Self Flushing Filter

Automatic self cleaning high capacity filter

Electrical connection required: 120 VAC 50/60 Hz (controller operates on 24VAC; Plug-in transformer provided with unit)

Shipping Weight: 45 lb

Operating Weight (w/water): 52 lb

Contaminant Removal Size:

0.025 micron

Replacement HSD Cartridge: Part No. EV9344-70

The contaminants or other substances removed or reduced by this drinking water system are not necessarily in your water. Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. Systems certified for cyst reduction may be used with disinfected water that may

The warranty period commences from the date of purchase and is administered as follows:

For a Period of ONE YEAR: Replacement Element*

For a Period of THREE YEARS: Entire System (excluding replacement element)

See printed warranty for details. Everpure will provide a copy of the warranty upon request.

* = This is for material and workmanship, not the filter or water treatment element life.

Everpure 1040 Muirfield Drive Hanover Park, IL 60133