Pentair Everpure H-1200 User Manual

EVERPURE® H-1200

H-1200 TWO-STAGE DRINKING WATER SYSTEM

The same commercial quality that makes Pentair® Everpure the overwhelming choice for water filtration in restaurants is also available for your home. The Pentair Everpure exclusive precoat filtration technology combines Micro-Pure pleated filter membrane. This highly engineered design offers the largest filtering surface area, longer filter life, and consistent performance.

FE ATURES

and a unique

What’s Inside

• Exclusive Micro-Pure filtering

material coats the pleated surface inside the cartridge

Commercial Grade Filtration

• The Pentair Everpure signature metal

canister delivers commercial-grade durability to protect the system from splitting or bursting

• Its food-grade polymer lining prevents

water from contacting the metal

SPECIFICATIONS

• Flow rate

controlled at 0.5 gpm (1.9 Lpm)

• Temperature

35-100° F (2-38° C) cold water use only

• Pressure

10-125 psi (0.7-8.6 bar) non-shock

• Capacity

1,000 gal. (3,780 L)

• Required Space

15W x 22H x 5D in 38W x 56H x 13D cm

22”

15”

SUBSTANCE REDUCTION

• Lead

• NSF/ANSI Standard 53 certified to

reduce cysts such as Cryptosporidium and Giardia by mechanical means

• Enhanced with KDF media to inhibit

scale build-up that can damage equipment

• Volatile Organic Chemicals (VOCs),

including THMs

• MBTE

• Chlorine taste & odor

• Chloramines

Great Tasting Water

• Effectively reduces methyl

tertiary butyl ether (MTBE)

• Retains vital minerals found naturally

in water to ensure the health benefits and delicious taste of your water

Added Benefits

• Dual cartridge system boasts a longer

lifespan compared to single cartridge system

• Dirt and cloudiness*

• Mold and algae*

• Reduces particles as small as 0.5

micron in size by mechanical means

*As tested by Everpure, LLC

EPA EST. NO. 002623-IL-002

FILTRATION & PROCESS EVERPURE H-1200 TWO-STAGE DRINKING WATER SYSTEM

ORDERING INFORMATION

MODEL PART NO DESCRIPTION

H-1200 EV928200 Drinking water system

H-1200 EV928201 #1 and #2 Cartridge

GENERAL INSTALLATION / OPERATION / MAINTENANCE REQUIREMENTS

This drinking water system must be maintained according to the manufacturer’s instructions, including replacement of filter cartridges. The substances reduced or removed by this system are not necessarily in your water. Read the performance data sheet.

It is recommended that before purchasing a water treatment unit, you have your water tested to determine your actual treatment needs.

Space required: 15W x 22H x 13D in (38W x 56H x 33D cm) including 2-1/2 inches of clear space under unit for cartridge change

Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. Systems certified for cyst reduction may be used on disinfected water that may contain filterable cysts.

A separate drinking water faucet is required

Install vertically with cartridge hanging down

Use minimum length of tubing possible Flush new cartridge at full flow for three

minutes to purge air Replace both cartridges at the same

time; either when capacity is reached, or when flow becomes too slow. To ensure optimum water filtration, cartridges should be changed annually.

Health Claim Performance Certified by NSF*

This system has been tested according to NSF/ANSI 42 and 53 for the reduction of the substances listed below. The concentration of the indicated substances in water entering the system was reduced to a concentration less than or equal to the permissible limit for water leaving the system,as specified in NSF/ANSI 42 and 53.

SUBSTANCE

INFLUENT CHALLENGE

CONCENTRATION

MAX. PERMISSIBLE PRODUCT

WATER CONCENTRATION

REQUIREMENTS

REDUCTION

MINIMUM

REDUCTION

AVERAGE

REDUCTION

Standard 42 – Aesthetic Effects

Chlorine 2.0 mg ± 10% – ≥ 50% – 96.8% Chloramine 3.0 mg ± 10% 0.5 mg/L – – 98.2% Particulate, Class I Particles 0.5 - <1 μm at least 10,000 particles/mL – ≥ 85% 99.2%

Standard 53 – Health Effects

Cyst Minimum 50,000/L – 99.95% 99.99% 99.99% Lead 6.5 0.15 mg/L ± 10% 0.010 mg/L – 99.3% 99.3% Lead 8.5 0.15 mg/L ± 10% 0.010 mg/L – 96.1% 98.6% Methyl tert-butyl ether 0.15 mg/L ± 20% 0.005 mg/L – 96.4% 96.4% Chloroform 0.307 mg/L 0.015 mg/L – 99.9% 99.9%

(VOC surrogate chemical)

*Tested using flow rate = 0.5gpm; pressure = 60 psig; pH = 7.5 ±0.5; temp. = 20° C ±2.5º C

Everpure

Warranty – Everpure Drinking Water Systems are warranted to be free of defects for a full twelve (12) months after purchase. A detailed warranty statement is provided with each system.

System Tested and Certified by NSF International against NSF/ANSI

Standard 42 and 53 for the reduction of: Standard No. 42 Aesthetic Effect:

Chemical Reduction

• Taste and Odor

• Chlorine Taste & Odor

• Chloramine Mechanical Filtration

• Particulate Reduction: Class I

FILTRATION & PROCESS

5730 NORTH GLEN PARK ROAD, MILWAUKEE, WI 53209 P: 262.238.4400 | F: 262.238.4404 | WWW.PENTAIRAQUA.COM | WWW.RESIDENTIAL.EVERPURE.COM | CUSTOMER CARE: 800.279.9404

All Pentair trademarks and logos are owned by Pentair, Inc. or its affiliates. All other registered and unregistered trademarks and logos are the property of their respective owners. Because we are continuously improving our products and services, Pentair reserves the right to change specifications without prior notice. Pentair is an equal opportunity employer.

Standard No. 53 Health Effects:

Chemical Reduction

• VOC

• Lead

• MTBE Mechanical Filtration

• Cyst