Pentair Everpure EV9100-67, IN-6PG-S Specifications
BENEFITS
APPLICATION/SIZING
INSTALLATION TIPS
OPERATION TIPS
Designed for scale prevention only
EV9100-67
IN-6 PG-S In-line Filter
IN-6 PG-S: EV9100-67
IN-6 PG-S: EV9100-67
100% phosphate cartridge inhibits the formation
of limescale, which can shorten the life of
equipment
6" in-line design is compact and installs out of
sight behind equipment
Use 1/4” water line
Flush IN-6 PG-S by running water through
filter for three minutes at full flow
Change cartridges on a regular 6 month
preventative maintenance program
Service flow rate must not exceed 0.5 gpm
Always flush the filter cartridge at time of
installation and cartridge change
For low volume, single pot coffee brewers with
flow rates up to 0.5 gpm
Capacity: 6 months
Overall Dimensions:
Length: 6”
Diameter: 2.0"
Inlet connection: 1/4”
Outlet connection: 1/4”
Capacity: 6 months scale reduction
Service Flow Rate:
Maximum 0.5 gpm (1.9 Lpm)
Pressure Requirements:
10 - 125 psi (0.7 – 8.6 bar), non-shock
IN-6 PG-S In-line Filter
In-line Filter
Temperature:
35 - 100°F (2 - 38°C)
Operating Weight:
1.0 lbs.
No electrical connection required
The contaminants or other substances
removed or reduced by this drinking water
system are not necessarily in your water. Do
not use with water that is microbiologically
unsafe or of unknown quality without
adequate disinfection before or after the
system. Systems certified for cyst reduction
may be used with disinfected water that may
contain filterable cysts.
Everpure water treatment systems (excluding replaceable elements)
are covered by a limited warranty against defects in material and
workmanship for a period of five years after date of purchase.
Everpure replaceable elements (filter cartridges and water treatment
cartridges) are covered by a limited warranty against defects in
material and workmanship for a period of one year after date of
purchase. See printed warranty for details. Everpure will provide a
copy of the warranty upon request.
Loading...