Pentair Everpure EF-6000 User Manual

EVERPURE® EF-6000

EF-6000 FULL FLOW DRINKING WATER SYSTEM

The same commercial quality that makes Pentair® Everpure® the overwhelming choice for water filtration in restaurants is also available for your home—now without the need for extra faucets. The Pentair great-tasting, crisp, clean filtered water at every regular tap in your home, and its large capacity makes it ideal for your family kitchen prep sink or pot filler.

FE ATURES

Everpure® EF-6000 introduces

Easy installation

• No additional faucet required

• Built-in water shut-off allows for

easier cartridge changes

Great Tasting Water

• Reduces particles as small as 0.5

micron in size by mechanical means

• Retains vital minerals found naturally

in water to ensure the health and delicious taste of your water

SPECIFICATIONS

• Flow rate

controlled at 2.2 gpm (8.3 Lpm)

• Temperature

35-100° F (2-38° C) cold water use only

• Pressure

10-125 psi (0.7-8.6 bar) non-shock

• Capacity

6,000 gal. (22,713 L)

• Required Space

5W x 22H x 5D in 13W x 56H x 13D cm

†

22”

5”

SUBSTANCE REDUCTION

• Lead

• Chlorine taste & odor

• Dirt and cloudiness*

• NSF/ANSI Standard 53 certified to

reduce cysts such as Cryptosporidium and Giardia by mechanical means.

• Treated to inhibit biofilm and microbial

build-up in the filter that can decrease product life.

Commercial Grade Filtration

• Helps prevent lime and scale build-up

in water-using appliances

• Commercial grade metal canister

protects the filter system from splitting or bursting

Everpure Everywhere

• Ideal for anywhere in your home,

especially your main kitchen faucet.

*As tested by Everpure, LLC.

†

Flowrate at 2.2 gpm is NSF

Standard 42 certified at 1.67 gpm

FILTRATION & PROCESS EVERPURE EF-6000 FULL FLOW DRINKING WATER SYSTEM

EPA EST. NO. 002623-IL-002

ORDERING INFORMATION

MODEL PART NO DESCRIPTION

EF-6000 EV985500 Drinking water system

EF-6000 EV985550 Cartridge

GENERAL INSTALLATION / OPERATION / MAINTENANCE REQUIREMENTS

• This drinking water system must be maintained

according to the manufacturer’s instructions, including replacement of filter cartridges. The substances reduced or removed by this system are not necessarily in your water. Read the performance data sheet for more information.

• It is recommended that before purchasing a water

treatment unit, you have your water tested to determine your actual treatment needs

• Space required: 13W x 56H x 13D cm

(5W x 22H x 5D in) including 2-1/2 inches of clear space under unit for cartridge change

• Do not use with water that is microbiologically

unsafe or of unknown quality without adequate disinfection before or after the system. Systems certified for substance reduction may be used on disinfected water that may contain filterable cysts.

• Install vertically with cartridge hanging down

• Flush new cartridge at full flow for three minutes

to purge air

• Replace cartridge when capacity is reached, or

when flow becomes too slow, but at least annually

Easy installation steps

Shut cold water supply off and disconnect cold water hose.

Connect cold water supply hose from faucet to outlet of filter head.

Mount filter head and connect water supply to inlet of filter head.

For detailed instructions, see the Owner’s Guide.

Health Claim Performance Certified by NSF/ANSI*

This system has been tested according to NSF/ANSI 42 and 53 for the reduction of the substances listed below. The concentration of the indicated substances in water entering the system was reduced to a concentration less than or equal to the permissible limit for water leaving the system,as specified in NSF/ANSI 42 and 53.

SUBSTANCE

INFLUENT CHALLENGE

CONCENTRATION

MAX. PERMISSIBLE

PRODUCT WATER CONCENTRATION

REDUCTION

REQUIREMENTS

MINIMUM

REDUCTION

AVERAGE

REDUCTION

Standard 42 – Aesthetic Effects

Chlorine 2.0 mg ± 10% – ≥ 50% – 97.4% Particulate, Class I Particles 0.5 - <1 μm at least 10,000 particles/mL – ≥ 85% 99.8%

Standard 53 – Health Effects

Cyst Minimum 50,000/L – 99.95% 99.99% 99.99% Lead 8.5 0.15 mg/L ± 10% 0.010 mg/L – 98% 98.9% Lead 6.5 0.15 mg/L ± 10% 0.010 mg/L – 99.3% 99.3%

*Tested using flow rate = 1.67 gpm; pressure = 60 psig; pH = 7.5 ± 0.5; temp. = 20° ± 2.5°C

Everpure

The term “bacteriostatic” indicates that the system limits passage or growth of bacteria that may already exist in the incoming water. It does not mean that water leaving the system is safer to drink than water entering the system.

Warranty

Everpure Drinking Water Systems are warranted to be free of defects for a full twelve (12) months after purchase. A detailed warranty statement is provided with each system.

Install Quick Change cartridge and turn on water.

System Tested and Certified by NSF International against NSF/ ANSI Standard 42 and 53 for the reduction of:

Standard No. 42 Aesthetic Effect: Bacteriostatic Effect

Chemical Reduction

• Taste & Odor

• Chlorine

Mechanical Filtration

• Particulate Reduction: Class I

Standard No. 53 Health Effects:

Chemical Reduction

• Lead

Mechanical Filtration

• Cyst

FILTRATION & PROCESS

5730 NORTH GLEN PARK ROAD, MILWAUKEE, WI 53209 P: 262.238.4400 | F: 262.238.4404 | WWW.PENTAIRAQUA.COM | WWW.RESIDENTIAL.EVERPURE.COM | CUSTOMER CARE: 800.279.9404

All Pentair trademarks and logos are owned by Pentair, Inc. or its affiliates. All other registered and unregistered trademarks and logos are the property of their respective owners. Because we are continuously improving our products and services, Pentair reserves the right to change specifications without prior notice. Pentair is an equal opportunity employer.