Pentair Everpure CWS-10 User Manual

Download

Page 1

BENEFITS

APPLICATION/SIZING

INSTALLATION TIPS

OPERATION TIPS

EV9799-06

CWS-10 Carbon Filter Wrap

Adds sediment and carbon filtration capabilities to Wrap ScaleStick®, which provides scale and corrosion control

CWS-10 Carbon Block Filter Wrap:

EV9799-06

SSW-10 Wrap ScaleStick:

EV9799-04

Features Hydroblend™ compound, a unique blend that inhibits mineral scale deposits and provides corrosion protection in low flow waterfed equipment

Patented design (patent no. 5,580,448) dispenses a controlled amount of Hydroblend™ for longterm protection and provides greater effectiveness than standard phosphate treatments

Unaffected by high temperatures, permitting a wide variety of applications

Integral feed cartridge fits standard 10" housings

Translucent cartridge allows simple visual monitoring of product usage and ensures against wasteful premature cartridge replacement

Wrap ScaleStick® (SSW-10) is specially designed to be used with a carbon block filter wrap (CWS-10) to combine sediment filtration, chlorine reduction and scale control. The CWS-10 is designed to fit over and around the Wrap ScaleStick® and is sold separately

Housing not included. Order Model A-10 Clear 10” Housing (EV9100-01) separately for temperatures less than 125°F

Make sure selected housing fits temperature/ pressure conditions

Install vertically with black o-band seal up

Wrap ScaleStick® cartridges are shorter than standard ScaleStick™ cartridges and do not have the o-band seal. They cannot be installed without the special filter wraps. Standard ScaleStick® cartridges cannot be installed into filter wraps

Deliming of equipment prior to application is recommended, but not required

Inspect ScaleStick® cartridges at least every 6 months

Replace ScaleStick® before Hydroblend™ compound is completely dissolved

Pre-existing equipment scale may come loose and clog equipment. Remove any loose scale to assure satisfactory operation

For water-using equipment:

Steamers and Combi-ovens Ice Machines Coffee and Espresso Machines Proofers

Page 2

Dimensions:

Filter Wrap: 7-11/16”H x 2-13/16” Diameter

Wrap ScaleStick SSW-10: 9-9/16" x 1-5/16" Diameter

Service Flow Rate:

0.1 - 6 gpm

Maximum Temperature: 150°F*

*If inlet feed water temperature is above 125°F a hot water housing must be used. Note: Filter Wraps are not to be used in hot water feed applications.

CWS-10 Carbon Filter Wrap

Carbon Filter Wrap for SSW-10 Wrap ScaleStick

**The ScaleStick® trademark is used pursuant to an agreement between PWC Enterprises and Everpure, Inc.

Everpure water treatment systems (excluding replaceable elements) are covered by a limited warranty against defects in material and workmanship for a period of five years after date of purchase. Everpure replaceable elements (filter cartridges and water treatment cartridges) are covered by a limited warranty against defects in material and workmanship for a period of one year after date of purchase. See printed warranty for details. Everpure will provide a copy of the warranty upon request.