Pentair Everpure 169096, SSFM-50AC Specifications

SSFM-50AC Series

Superior Water Disinfection for Marine Applications

SSFM-50AC

(See back for

Part No.’s)

BENEFITS

Simple to operate – No chemicals to mix•

Safe to handle – Not a re or explosion hazard•

Effective Disinfectant – More effective across a • broader pH range than chlorine

Bromine is 4-10 times less noticeable in water than • chlorine giving you better-tasting water

Global service and parts availability•

Depended on by USN, USCG and offshore oil and • gas rigs for safe, reliable water

Recognized by the U.S. Navy as the safest, most reliable, • and easy-to-use method of water disinfection aboard ship

Requires no additional chemicals – Bromine cartridges • are ready to use and require just 30 seconds to change

Automatically delivers bromine to water in a constant ratio•

Automatic feeding system has simple hydraulic controls•

Lightweight for easy moving and installation•

Available as a non-magnetic unit for special applications•

BROMINATION FOR SAFE, POTABLE WATER

Everpure proportioning bromine feeders add a predetermined quantity of elemental bromine into the freshwater discharge of the on-board watermaker prior to the potable water storage tank to ensure the potable water is bacteriologically safe for human consumption.

Everpure is the original manufacturer of bromine feeders and the manufacturer of the patented Everpure Brominating Cartridge (NSN 4610-01-022-9970). Equipment manufactured by Everpure is installed aboard nearly every US Navy surface warfare vessel, USCG Ships, USACE, NOAA, and numerous offshore oil, gas and production platforms. The Everpure Brominating Cartridge is recognized as the safest, most reliable, most effective and easy-to-use water disinfectant for marine applications; no more chemicals to mix, no fragile pumps and valves that clog, no flammable and/or explosive reactions with organics (fuel oils, paint,etc).

VALV E

(SUPPLIED BY

INSTALLER)

FLANGE AND

GASKET

(SUPPLIED BY INSTALLER)

BYPASS HEADER ASSEMBLY

(MUST BE VERTICALLY

MOUNTED)

HOSE

CLAMPS

FLEXIBLE

TUBING

WATER METER

FEEDER

ASSEMBLY

VALV E

(SUPPLIED BY

INSTALLER)

BYPASS HEADER

AND VALVE

(SUPPLIED BY

INSTALLER)

DUAL FEED

VALV E

ASSEMBLY

ALLOW 13 INCHES MIN.

FROM TOP OF FEEDER

TO OVERHEAD FOR

REMOVAL OF CARTRIDGE

14-1/2" PLUS

THICKNESS OF GASKET

23" MAX

18" MAX

LOW HIGH

EVERPURE

BROMINATOR

Model SSFm-50 Type II, Class 1

NICN-4610 Serial No. Job No.

Plymouth Products

Sheboygan, Wisconisn 53081

SPECIFICATIONS

SSFM-50AC: 35 lbs. (15.9 kg)

Weight

Dry Weight

SSFM-50AC: 30 lbs. (13.6 kg)

MOuNTING

System components should be vertically mounted on a bulkhead or stanchion within reasonable proximity to each other and the bypass header assembly. A minimum of 13 inches of overhead clearance is required above the feeder assembly for easy removal of the disposable bromine cartridge. For convenience, the instruction plate with operating procedure should be bulkhead mounted adjacent to the proportioning bromine feeder.

PLuMBING TERMINATIONS

The proportioning bromine feeder is flanged per MIL-F-20042, 3/4-inch for all SSFM-50AC series models. A three valve bypass loop should be plumbed into bypass the proportioning bromine feeder during maintenance or bromine cartridge change. This bypass loop can be provided by the installer.

SIZING AND ORDERING A PROPORTIONING BROMINATOR

For each distiller / watermaker served, determine the capacity in gallons per day. Using this figure, calculate the discharge in gallons per minute. For example: 12,000 gpd /24, /60 = 8.3 gpm. Choose a part number corresponding to these flow rates:

SSFM-50AC SERIES

BROMINATOR

FLOW RATE (gpm)

0.7 169096 EV906410

0.8 – 1.2 169097 EV906411

1.3 – 1.4 169098 EV906412

1.5 – 1.8 169099 EV906413

1.9 – 3.0 169100 EV906414

3.1 – 4.0 169101 EV906415

4.1 – 8.3 169102 EV906416

SSFM-50AC SERIES

BROMINATOR

PART NO.

REPLACES

PART NO.

NOTES

A potable water storage tank should be treated whenever it is filled from a shore source, or whenever there is no measurable bromine residual in the tank. A measurable bromine residual will insure the water is safe to drink. See our recirculating brominator data sheets for this application.

Pentair Filtration, Inc.

502 Indiana Avenue - P.O. Box 1047

Sheboygan, Wisconsin 53082-1047

Phone 866.873.7506 Fax 888.203.7361

International Phone 920.457.9435 International Fax 920.457.2417

www.everpure.com