Pentair Tagelus User Manual

®
Tagelus
Fiberglass Sand Filter
By Pentair Pool Products
®
Making a time-proven technology better
Sand filters have been installed on tens of thousands of pools for decades—a testament to their performance, value and ease of use. But not all sand filters are equal, because not all include design features that continuously flatten and level the sand inside the tank. This is the key to consistent performance and quicker cleaning cycles that keep pump operating costs low. It is also a key advantage when you select a Tagelus® filter.
Features:
The Tagelus tank is constructed in one piece from
fiberglass reinforced material to deliver unmatched strength and durability for years of service.
Easy does it. The six-position Hi-Flow™ valve has a
manual air relief valve and a sight glass to make inspection, routine maintenance and operation fast, easy and always safe. Pressure gauge also included.
Tagelus filters provide years of service with only
periodic backwashing to remove trapped debris from the sand.
A special “diffuser” creates a uniform sand bed that
consistently traps more dirt without impeding the water flow or letting it race through too fast—the result is more effective filtration and longer times between backwashing.
Tagelus® Fiberglass Sand Filter
Six-position Hi-Flow™ valve provides easy control of all filter functions:
Filter
Backwash
Rinse
One-piece fiberglass reinforced tank with UV-resistant surface finish for years of service for exceptional strength
Model Filter Vertical* Filter Required Flow Rate GPM Turnover Capacity (Gallons)
Number Area Sq. Ft. Clearance Diameter Sand
TA 40D 1.8 47" 19.5" 175 40 19,200 24,000 28,000
TA 50D 2.3 51.5" 21.5" 225 50 24,000 30,000 36,000
TA 60D 3.1 57" 24.5" 325 60 28,000 36,000 43,200
TA 100D 4.9 65.5" 30.5" 600 100 48,000 60,000 72,000
Maximum water clarity with minimal attention
Waste
Closed
Recirculate
(lbs.) Res.** 8hrs. 10hrs. 12hrs.
* Required clearance to remove the valve.
Use standard #20 silica sand.
** Maximum flow rate.
Maximum operating pressure is 50 psi.
Tagelus filters remove particles large and small…so small that many are undetectable by the human eye, but in quantity make water cloudy. The reason thousands of Tagelus filters have been installed by pool professionals worldwide is their consistency of performance over time. Plus, they go about their work without making work for you.
Added features include:
Time-proven internal design ensures water is exposed
to maximum surface area of sand for optimal filtration performance and more efficient backwashing.
Flow system design also ensures maximum run times
between backwashing to save you time.
Combination sand and water drain speeds servicing
and winterizing.
All internal parts are threaded for fast and easy service.
One-year limited warranty. See warranty for details.
Available from:
www.pentairpool.com Phone: 800-831-7133 Fax: 800-284-4151
pumps / filters / heaters / heat pumps / automation / lighting / cleaners / sanitizers / maintenance products
2/06 Part # P1-011
©2006 Pentair Water Pool and Spa, Inc. All rights reserved.
Loading...