Skimmer Lid w/Thermometer
Assembly Instructions
Important Notice
Attention Installer.
This manual contains important information about the installation, operation and safe use of this
product. This information should be given to the owner/operator of this equipment.
Call (800) 831-7133 for additional free copies of this manual.
INSTRUCTIONS FOR ASSEMBLY
1. Screw protector tube into bottom of skimmer lid.
2. Insert thermometer in top of skimmer lid. Bushing should always be on thermometer when
assembling.
3. Line up the 80° mark with the arrow and press in by placing both thumbs firmly on face of dial.
4. To disassemble, unscrew protector tube counter-clockwise and remove completely.
Now place unthreaded end of tube over stem and push thermometer out.
Skimmer Lid
Protector T ube
Thermometer
Stem
Thermometer
Bushing
CAUTION
Do not bend stem of thermometer.
Pentair Pool Products
1620 Hawkins Ave., Sanford, NC 27330 • (919) 774-4151
10951 West Los Angeles Ave., Moorpark, CA 93021 • (805) 523-2400
P/N 510362 1 Rev. A 3-22-04