Pengo SLD512AT, SLD1GBAT User manual

1

MP3 / WMA PLAYER & USB FLASH DRIVE

User’s Manual

For Model SLD512AT, SLD1GBAT Only

Release 1.0

The Product and materials mentioned in this manual are subject to change without prior notice.

2

Caution of Operation

1． Don’t squeeze or cast the player to break the plastic case.
2． Don’t operate the player in bathroom in high humidity or near the high temperature environment.
3． Don’t direct press the LCD panel to damage the display surface.
4． Please do not use the player with earphone while driving an vehicle or riding a bicycle, It is not only dangerous, but also

against the law. And please keep your volume down when crossing streets.
5． To prevent static, avoid the extreme dry surroundings.
6． Do not disconnect the player with PC while you copying file.
7． Manufacturer will not take any responsibility of files storage damage which cause by abnormal operation.
8． Please do not cleaning the player with chemicals such as alcohol or thinner.
9． Users are not allowed to repair the player by him/herself.
10． The MP3 player should be no driver need for windows XP/2000/ME except windows 98 (a installation disc is packed in the

player box)
11． Set the HOLD switch to the release position before operation.
12． When you use this player as a USB stick, please always follow the correct operation method .Any misuse may cause file lost.
13． Do not drop the player, which probably cause battery fall off or damage its surface.

14． If you don't intend to use your MP3 player for an extended period of time, don't forget to remove the batteries from it to avoid

any possibility of damage caused by battery leakage.

This MP3 can not play license protected files, please make sure your files do not have any copy

protection.

Player overview

Front

On the side

USB Port

Power On/Off
Play/Pause/Stop

LCD Display

Enter / Make Selection

Press down for MODE (MENU)
Rolling the stick for:
Next Track/Forward
Previous Track/Rewind

Headphone

HOLD Switch

VOL- VOL+

USB Port

3

LCD

USB Connection

1. Installing the driver for Windows 98:
(For windows operating system ME/2000/XP or greater, you need not install the driver, please skip this step.)

Insert the installation CD-ROM into the CD-ROM drive and driver installation will start.
The windows 98 Driver will be finished installation until the last window show out.

2. Connecting PC

Before operation, please verify the player is turned off, and one end of the USB cable came with the system is inserted into PC
with another end into the MP3 player.
Once you connect to your computer, if your player displays <*USB RDY* >, then the USB connection is operational.

3. Download MP3 songs

A new drive will show in your computer, you can copy your audio files (in MP3 or WMA format) to your player and the download

status will be displayed as follows.

4. Removing USB device

1. Double click the Safely Remove Hardware icon in taskbar:

2. From Safely Remove Hardware screen, highlight "USB Mass Storage Device" item, then click "Stop" button.

3. Click "OK" button. After the "Safe to Remove Hardware" window appears, the player can be disconnected from PC safely.

Warning: An error might occur if remove the connection of the USB cable when transferring data. After data transferred and “Safe
to remove hardware ”window appeared the player can be removed from PC safely!

This MP3 NOT support FORMAT by computer, it will not functional if you use your computer to format it.
If you press mode stick when MP3 connected to computer, the MP3 will disconnect and you can operate it without

battery, your computer USB port will be a power source.