Pengo SA-70 Instruction Manual
AUGER DRIVE
(TWO SPEED GEARTEK MOTOR VARIANT)
SA-70 (660983)
Instruction Manual
Owner’s Manual
Safety Precautions
Operating Instructions
Maintenance
Parts Lists
800-599-0211 l www.paladinbrands.com l PENGO: 500 East Highway 10, Laurens, IA 50554, United States of America
(M135776.indd) SA-70 1
Manual Number: M135776.indd
Release Date: March 27, 2007
PREFACE
This manual is used to familiarize you with safety, assembly, operation, adjustment, troubleshooting, and maintenance.
Read and follow the recommendations in this manual to ensure safe and efcient operation. The information contained
in this manual was current at the time of printing. Some items may change slightly to assure you the customer, the best
performance.
We want you to be completely satised with your new product, feel free to contact your local Authorized Service Dealer for
help with service, replacement parts, or any other information you may require.
Whenever you contact your Authorized Service Dealer or the factory, always have the model number and serial number
of your product available. These numbers will help provide exact information about your specic product. You will nd the
model and serial numbers on an ID plate located on the product.
For your convenience, write the product model number, serial numbers, and date of purchase in the spaces below.
MODEL NO: ___________________
SERIAL NO: ___________________
DATE of PURCHASE: _____________
TABLE OF CONTENTS
Preface / Table of Contents ................................................................................................................................. 2
Safety Statements ............................................................................................................................................ 3
General Precautions ........................................................................................................................................... 4
Safety Decal Locations / Serial Tag Location ...................................................................................................... 5
Specications / Component and Control Locations ............................................................................................ 6
Set-Up Instructions / Operating Procedures / Storage ....................................................................................... 7
General Maintenance / Checking and Changing the Gear Oil ............................................................................ 8
Maintenance Cont. / Troubleshooting ................................................................................................................. 9
SA-70 Drive Parts Breakdown ........................................................................................................................... 10
SA-70 Drive Parts List ........................................................................................................................................11
Auger Drive Warranty Policy / Returned Goods Policy ..................................................................................... 12
Torque Chart for Common Bolt Sizes ................................................................................................................ 13
2 SA-70 (M135776.indd)
SAFETY STATEMENTS
DANGER
WARNING
CAUTION
WARNING
THIS STATEMENT IS USED WHERE SERIOUS INJURY OR DEATH WILL RESULT IF THE
INSTRUCTIONS ARE NOT FOLLOWED PROPERLY.
THIS STATEMENT IS USED WHERE SERIOUS INJURY OR DEATH COULD RESULT IF
THE INSTRUCTIONS ARE NOT FOLLOWED PROPERLY.
THIS STATEMENT IS USED WHERE MINOR INJURY COULD RESULT IF THE
INSTRUCTIONS ARE NOT FOLLOWED PROPERLY.
THIS SYMBOL BY ITSELF OR USED WITH A SAFETY SIGNAL WORD THROUGHOUT
THIS MANUAL IS USED TO CALL YOUR ATTENTION TO INSTRUCTIONS INVOLVING
YOUR PERSONAL SAFETY OR THE SAFETY OF OTHERS. FAILURE TO FOLLOW
THESE INSTRUCTIONS CAN RESULT IN INJURY OR DEATH.
READ MANUAL PRIOR TO INSTALL
Improper installation, operation, or maintenance of the equipment could result in serious
injury or death. Operators and maintenance personnel should read this manual as well as
all manuals related to this equipment. FOLLOW ALL SAFETY INSTRUCTIONS IN THIS
MANUAL.
WARNING
WARNING
READ AND UNDERSTAND ALL SAFETY STATEMENTS
Read all safety decals and safety statements in all manuals prior to operating or working
on this equipment. Know and obey all OSHA regulations, local laws and other professional
guidelines for your operation. Know and follow good work practices when assembling,
maintaining, repairing, mounting, removing or operating this equipment.
KNOW YOUR EQUIPMENT
Know your equipment’s capabilities, dimensions and operations before operating. Visually
inspect your equipment before you start, and never operate equipment that is not in proper
working order with all safety devices intact. Check all hardware to assure it is tight. Make
certain that all locking pins, latches, and connection devices are properly installed and
secured. Remove and replace any damaged, fatigued or excessively worn parts. Make
certain all safety decals are in place and are legible. Keep decals clean, and replace them if
they become worn and hard to read.
DO NOT MODIFY EQUIPMENT
Modications may weaken the integrity of the equipment and may impair the functions, safety,
life, and performance of the equipment. When making repairs, use only the manufactures
genuine parts, following authorized instructions. Other parts may be substandard in t and
quality.
(M135776.indd) SA-70 3
GENERAL PRECAUTIONS
PREPARE FOR EMERGENCIES
• Be prepared if a re starts.
• Keep a rst aid kit near by when operating equipment.
WARNING
CAUTION
WARNING
OPERATOR SAFETY
• Protective clothing and equipment should be worn at all times.
• Wear protective clothing and equipment appropriate for the job. Avoid loose tting clothing.
• Prolonged exposure to excessive noise can cause hearing loss. Wear suitable hearing protection
such as ear plugs.
• Operating equipment safely requires the full attention of the operator. Avoid distractions.
• Do not operate the unit when you are tired, ill or under the influence of alcohol, drugs or
medication.
• Never let a minor or inexperienced person operate the unit.
• Keep hands away from the drilling bit at all times.
• Inspect the area to be drilled before operation. Remove objects which can be thrown or become
entangled.
UNIT AND TOOL SAFETY
• Inspect the entire tool before operation.
• Replace parts that are cracked, chipped or damaged in any way before operation.
• Keep others away when making any adjustments to the unit.
• Damage to the Auger Drive and auger bit can result if the prime mover moves while the auger is
still in the hole.
PRACTICE SAFE MAINTENANCE
• Use proper tools and equipment when conducting maintenance, refer to this manual for additional
information.
• Work in a clean dry area.
• Inspect all parts. Be sure parts are in good working condition and installed properly.
• Remove build up of grease, oil or any debris.
• Remove all tools and unused parts from equipment before beginning operation.
WARNING
WARNING
WARNING
4 SA-70 (M135776.indd)
BE ALERT ON THE JOB SITE
Tragic accidents can occur if the operator is not alert to the presence of children. Children are often
attracted to machinery and work activity. Never assume that children will remain where you last saw
them. BE ALERT and turn the equipment off if children enter the work area. Keep children out of the
work area and under supervision of another responsible adult.
DRILLING SAFETY
• Inspect the area to be drilled before operation. Remove objects which can be thrown or become
entangled.
• Keep all parts of your body away from the drilling bit when operating the unit.
• DO NOT operate the Auger Drive when the auger bit is more then 12” (305mm) above ground. The
auger bit may bind and cause injury to the operator and damage to the equipment.
• While the auger bit is rotating, DO NOT attempt to manually guide the auger to a location.
UNDERGROUND HAZARDS
It is the responsibility of the operator to know where buried power, gas, telephone, and other utilities
are at in the work area. This may lead to shock or an explosion. Have the work area marked for buried
lines and do not dig in marked areas set by your local municipals. Striking a hard object underground
with the auger turning can result in the slowing or stopping of the auger.
SAFETY DECAL LOCATIONS
READ AND UNDERSTAND
OPERATORS MANUAL BEFORE
OPERATING OR SERVICING
MACHINE
INSPECT UNIT BEFORE EACH USE. VERIFY ALL COMPONENTS ARE
PROPERLY SEATED AND TIGHTENED. DO NOT USE IF EXCESSIVE WEAR
AND OR WARN, CRACKED OR DAMAGED COMPONENTS EXIST.
STAY 10 FT. (3m) OR MORE AWAY
UNLESS OPERATING MACHINE
STAY AWAY FROM
ROTATING AUGER AND
CUTTING HEAD
AVOID INJURY OR DEATH
350247
DANGER
SAFETY DECALS
This unit comes equipped with all safety decals in place. They are designed to help you safely operate
your unit. Read and follow all safety decals. (Locations shown below in gure 1)
• Keep all safety decals clean and legible at all times.
• Replace safety decals that are missing or have become illegible.
• Safety decals are available from your distributor or manufacture.
• Some parts installed during repair may require safety decals to be afxed to the replacement part.
When ordering the replacement part(s) be sure the correct safety decal(s) are included in your order.
INSTALLING SAFETY DECALS
• Clean the desired area with warm soapy water.
• Decide on exact position before you remove the backing paper.
• Peel backing paper from decal. Press rmly on the surface.
• Air pockets can be pierced with a pin and smoothed.
350247
(M135776.indd) SA-70 5
Figure 1
Loading...