Penco SK242172DDNBF-722 User Manual

Stadium Fully Framed LOCKER – KD

PENCO PRODUCTS, INC | 1820 Stonehenge Drive, Greenville, NC 27858

800-562-1000 | Fax: [phone] | [e-mail]

Assembly Instructions

Fasteners & Tools Needed

The following items are in the hardware kit
shipped with the locker:

8615–Number plate

8671–Aluminum Rivet

8621- Steel rivet

8709-Screw

8696- Coat Hook,

8717 Coat Rod Hook

6CR___-Coat Rod

You will need these tools to assemble the Stadium
locker.

Rivet gun.

Drill with #3 Philips bit

Flat blade and Phillips head screwdrivers.

Stepladder

STEP 1- Check Parts

Unpack the component pieces for the basic locker.
You should have two sides, a back, a top, shelf, coat
rod hooks, coat rod, coat hooks, and bottom, for the
locker body. Options could include security box
and/or foot locker

www.pencoproducts.com

Stadium Fully Framed LOCKER – KD

PENCO PRODUCTS, INC | 1820 Stonehenge Drive, Greenville, NC 27858

800-562-1000 | Fax: [phone] | [e-mail]

Assembly Instructions

Note- Assemble locker upside down to
allow screw insertion into underside of
locker bottom. Locker assembly must be
done on a flat surface. Images shown may

differ from your locker, as there are different
configuration options. Some parts show with
transparency in these instructions to add
clarity to assembly.

STEP 2 – Assemble the locker body

2A- Lay locker top on flat surface on the ground.
Insert the two sides onto the cast corner pieces of the
top assembly.

2B-1 Insert locker back into slot of the top.

www.pencoproducts.com

Stadium Fully Framed LOCKER – KD

PENCO PRODUCTS, INC | 1820 Stonehenge Drive, Greenville, NC 27858

800-562-1000 | Fax: [phone] | [e-mail]

Assembly Instructions

2B-2 With the back inserted install one 8709 screw
on each side of the back about half way up. Note
holes are to align to make sure back is in proper
position.

www.pencoproducts.com

Stadium Fully Framed LOCKER – KD

PENCO PRODUCTS, INC | 1820 Stonehenge Drive, Greenville, NC 27858

800-562-1000 | Fax: [phone] | [e-mail]

Assembly Instructions

2C-1 Insert cast corner pieces of locker bottom into
the side channels.

www.pencoproducts.com

Stadium Fully Framed LOCKER – KD

PENCO PRODUCTS, INC | 1820 Stonehenge Drive, Greenville, NC 27858

800-562-1000 | Fax: [phone] | [e-mail]

Assembly Instructions

2C-2 Install one screw into each corner of the locker
bottom as shown.

www.pencoproducts.com

Stadium Fully Framed LOCKER – KD

PENCO PRODUCTS, INC | 1820 Stonehenge Drive, Greenville, NC 27858

800-562-1000 | Fax: [phone] | [e-mail]

Assembly Instructions

2D- Next install one screw into the locker top in each
corner as shown.

www.pencoproducts.com

Stadium Fully Framed LOCKER – KD

PENCO PRODUCTS, INC | 1820 Stonehenge Drive, Greenville, NC 27858

800-562-1000 | Fax: [phone] | [e-mail]

Assembly Instructions

2E- Now rotate locker body so the bottom is on the
ground.

www.pencoproducts.com

Stadium Fully Framed LOCKER – KD

PENCO PRODUCTS, INC | 1820 Stonehenge Drive, Greenville, NC 27858

800-562-1000 | Fax: [phone] | [e-mail]

Assembly Instructions

2F-Install screws to locker back at U cut locations (6
inch intervals) on each side.

www.pencoproducts.com