Penclic N3O User Manual

N3 Office Manual

EN
Welcome to the quick guide.
Penclic NumpadN3 Office combines
ergonomically sound design with
modern keyboard technology to
bring you comfort and efficiency.

Penclic Mini Keyboard setup

Connect the USB antenna to the USB port.
Driver installation starts automatically.

Switch on the power on the back side of the keyboard

How to use your Penclic

Mini Keyboard

Penclic Numpad N3Office LED indicates Num Lock status.

Blue text indicates fuction while Num Lock is off

Tap Num Lock key twice to start the calculator (windows system only)

Troubleshooting

• Make sure the Penclic Numpad USB
connector is firmly attached to the computer’s
USB port.

• Connect to another USB port.

• Connect to another computer.

Technical specifications

• The supported platforms for Penclic Mini
Keyboard are all operating systems that
support HID 1.1. These include Windows XP or
later, Mac OSX version 10.1 or later and
Linux/BSD. No extra software/driver
installation is needed.

• USB Connection.

Measurements

• Height: 6 mm (21 mm at top),
Base: 140 x 88 mm.

• Weight: 233g including 1.2m cable.

Technical support

Should you require additional technical support
with your Penclic®, please use our Web site
(www.penclic.se) for further information or contact
our support group through e-mail. Call Technical
Support during business hours, Central European
time (CET).

Contact

+ 46 70 580 2140

[e-mail]

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential i nst all ation. This equipment generates uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, m ay
cause harmful interference to radio communications. However, there is no guarantee that interf erence
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.

-- Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could voi d
the user's authority to operate the equipment.