pellenc Treelion M45, Treelion D45-700, Treelion D45-900, Treelion D45-1500 User Manual
26_73472_G - 06/2014
M45
pellenc s.a.
Route de Cavaillon
B.P. 47
84122 PERTUIS cedex
(France)
Tel : +33(0)4 90 09 47 00 Fax : +33(0)4 90 09 64 09
E-mail : pellenc.sa@pellenc.com
www.pellenc.com
ENG
USER GUIDE
READ THE USER’S GUIDE CAREFULLY BEFORE USE
CONTENTS OF THE CASE:
TREELION adaptable with Adaptor unit Self-contained TREELION (with battery and
cord)
• Pruning shears with Cord
• Arm band
• Sharpening stone
• Adjusting wrench
• Tube of grease
• Flat-blade screwdriver
• Warranty card
• User’s guide
• Hexagonal wrench
• Pruning shears with Adaptor unit
• Arm band
• Sharpening stone
• Adjusting wrench
• Tube of grease
• Flat-blade screwdriver
• Warranty card
• User’s guide
• Hexagonal wrench
Translation of the original
user guide
Table of contents
INTRODUCTION .............................................................................3
SAFETY INSTRUCTIONS .....................................................................9
GENERAL SAFETY INSTRUCTIONS FOR THE TOOL ....................................................10
SAFETY WARNINGS FOR THE TREELION M45 BATTERY POWERED PRUNING SHEARS ...................... 11
SAFETY MEASURES FOR THE CHARGER AND THE BATTERY ............................................ 11
DESCRIPTION AND TECHNICAL CHARACTERISTICS ............................................12
TECHNICAL CHARACTERISTICS ....................................................................13
USING FOR THE FIRST TIME .................................................................13
VERSION TREELION M45 + CORD + SHEARS BATTERY ................................................. 13
VERSION TREELION M45 + ADAPTOR UNIT + MULTIFUNCTION BATTERY ..................................13
USE ......................................................................................14
PROGRESSIVE MODE (FULL OPENING) .......................................................14
SEMI-OPEN MODE .........................................................................14
SAFETY MODE .............................................................................15
ADVICE FOR USE ..........................................................................15
REMARKS ................................................................................15
SHARPENING .............................................................................16
TIGHTENING THE BLADE ....................................................................16
DESCRIPTION OF THE CUTTING HEAD ........................................................17
REPLACING THE BLADE OR PINS ............................................................17
ACCESS COVER REPLACEMENT .............................................................17
REPLACING THE HOOK .....................................................................17
ADJUSTING BLADE BYPASS .................................................................18
ADJUSTMENT OF BLADE HALF-OPEN POSITION ...............................................18
MISCELLANEOUS MAINTENANCE ............................................................19
REPLACING THE BATTERY ..................................................................19
OUTSIDE THE PRUNING PERIOD .............................................................19
INCIDENTS ................................................................................19
«PELLENC SA» TERMS OF WARRANTY AND NON-RESPONSIBILITY CLAUSE .......................20
SPECIAL WARRANTY CONDITIONS ...........................................................21
"EC" DECLARATION OF CONFORMITY ........................................................22
3
Dear Customer,
We thank you for purchasing the TREELION. When correctly used and maintained, this tool will provide
you with years of satisfaction.
INTRODUCTION
With more than 20 years of experience in portable electric equipment, Pellenc proposes a large
range of Lithium-Ion and Lithium-Polymer powered tools intended for professional use and
designed for maintenance work in green spaces, orchards and vineyards, and cleaning equipment
for public roads.
Pellenc sets the stage for a new generation of tools combining the advantages of cordless electricity with
the power of Lithium-Ion and Lithium-Polymer, designed for intensive, high quality work.
Increasingly quiet and compact, environmentally friendly, economically very protable and complying with
ever more strict specications regarding ergonomics, power and autonomy, Pellenc tools prove their worth
every day, whether in vineyards, orchards or for the maintenance of green spaces and public sectors.
Pellenc tools are the world leader in this eld.
Because of the lightweight nature and easy handling of PELLENC tools, users can work better, with less
effort, without noise and faster than with heat-engine powered tools.
A single unique energy source powers PELLENC tools intended for professional use: The Ultra Lithium
Battery. This revolutionary battery is available in several models, with extended work capabilities. Once
purchased, this battery is compatible with most of the Pellenc Green and City Technology range of
products.
«Innovation, ability to listen, quality and environmental friendliness are PELLENC priorities.»
OUR high capacity Ultra Lithium-Ion BATTERIES
PELLENC is the rst and only manufacturer worldwide to propose a whole range of professional tools
for Parks and Gardens, Local Authorities, Golf Courses, Orchards, Vineyards etc. operated using ultra-
high capacity ternary Lithium-Ion batteries.
PELLENC has developed its own Lithium-based technology for the best results in terms of output
power, autonomy, weight and ergonomics. The result is enlightening as the Pellenc Lithium-Ion
technology is nearly twice more efcient than the Manganese Lithium-Ion technology. Manganese Lithium-
Ion contains 125 W/kg, while Pellenc Lithium-Ion contains 250 W/kg.
Furthermore, our ultra-high capacity batteries have an ranging from 800 to 1,500 cycles (one cycle
corresponds with a full charge and discharge). Even after hundreds of days of use, the battery still reaches
over 80% of its initial capacity.
Equipped with a patented intelligent system, Pellenc batteries can be charged at any time without
memory effect and without altering their lithium-ion components. They automatically discharge after several
days of non-use in order to be stored risk free for several months.
The ultra-high capacity of Ultra Lithium Batteries guarantees pollution free, odourless and quiet
operation with a record level of autonomy.
4
56_07_011A
INTRODUCTION
For example, a PELLENC ULB 1100 battery is equivalent to over
4700 liters of gasoline and 90 liters of mixture!
Characteristics of the ULTRA LITHIUM BATTERY
- Secure system (patented) guarantees the preservation of your battery in the event of overloading,
discharging or over-heating
- Life system (patented): ensures an optimum service life for your battery by protecting each of the
components individually
- Balance system (patented): guarantees the balancing of the various battery components in order to
optimise balanced operation
- Power system (patented): enables use of the entire range of PELLENC tools within the scope of a
professional activity thanks to the restitution of the battery’s maximum capacity
Advantages of the ULTRA LITHIUM BATTERY
- Environmentally friendly the energy used by PELLENC tools is environmentally friendly and
participates in an initiative towards sustainable development. Compared to equivalent heat engine
powered tools, CO2 emissions are 30 to 90 times lower.
- Power: PELLENC equipment ensures the user has an unequalled power supply of up to 3,000 W.
- Savings: the battery permits up to a full day of work at a derisory total cost.
- Ergonomics: PELLENC tools are very quiet and light, offering unrivalled comfort and optimal working
conditions.
- Cost-effectiveness: the cost of your battery will be recovered in under a year of use (from 135 days).
The return on investment in the battery over its service life is greater than 5,000 € thanks to the savings
on fuel which is not required*.
Compatibility of our batteries with our machines:
All PELLENC multi-function Ultra Lithium Batteries can be used on all of our machines. However, we
recommend the use of batteries according to the tool, in order to achieve an increased optimization of
autonomy, power and weight.
* You use 5L of mixture per day at a price of €1.50 per litre.
Data calculated for the regular use of the ULiB 1100 battery.
5
INTRODUCTION
RECOMMENDED USE OF BATTERIES AND TOOLS ACCORDING TO THEIR POWER AND
AUTONOMY*
Recommended use
SPECIFIC
BATTERY
MULTIFUNCTION BATTERIES
200 400 700 1100 POLY 5 OLIVION
Weight in kg (no harness nor belt) 1.9 3.4 5.5 5.9 3.4 5.5
LIXION Evolution - vineyard
pruning shears
1 to 3 days
LIXION Evolution adaptable -
vineyard pruning shears
2 / 6 days 5 days 10 days 3 / 7 days 5 days
TREELION autonomous
orchard pruning shears
1 to 2 days
TREELION adaptable
orchard pruning shears
3 days 4 / 5 days 7 days 3.5 days 4 / 5 days
HELION – hedge trimmer 1/2 day
Up to
1 day
Up to
2 days
1/2 day
Up to
1 day
OLIVION – olive harvester 2 to 4 hours
Up to
1 day
Up to
2 days
3 to 5 hours
Up to
1 day
CULTIVION – hoeing machine 2 to 4 hours
Up to
1 day
Up to
2 days
3 to 5 hours
Up to
1 day
SELION Pole - chainsaw 1 to 3 hours
Up to
1 day
Up to
2 days
2 to 5 hours
Up to
1 day
SELION M12 - chainsaw 1 to 3 hours
Up to
1 day
Up to
2 days
2 to 5 hours
Up to
1 day
SELION C21 HD - chainsaw 1 to 3 hours 3 to 5 hours
Up to
1.5 days
2 to 5 hours
EXCELION 1200 – grass-cutting
brush cutter
1 hour 2 to 3.5 hours 3 to 5 hours 1 to 2 hours
EXCELION 2000 – brush cutter** 2 to 3 hours 3 to 4,5 hours 1 to 2 hours
AIRION - blower 1 hour 2 to 3.5 hours 3 to 5 hours 1 to 2 hours
* Battery life depends on the tool, the use and the vegetation being worked on.
** Autonomy is calculated using the Eco mode
6
53_10_071A
INTRODUCTION
OUR high output MOTORS
As well as Lithium-Ion technology, PELLENC masters the use of another: revolutionary PELLENC
electronic commutation motors.
With these revolutionary motors, PELLENC has effectively rendered the heat engine obsolete. PELLENC
intends to impose its idea of the tool for tomorrow: powerful, light and pollution-free tools.
Furthermore, the PELLENC technology motor is the only electric motor with as much power output with
the added advantage of being small, giving it an ideal weight. The output of this motor is signicantly
higher than that of traditional direct-current motors with brushes. Friction caused by the brushes
disappears, the output of PELLENC motors is nearly 90 %.
PELLENC motors are Brushless motors. This means that their service life is theoretically innite, with
only the service life of the ball bearings limiting the motor’s service life. There is no need for motor
maintenance, as opposed to heat engines.
PELLENC Brushless motors stop completely each time the trigger is pressed, on the contrary to
heat engines. Therefore, sound emissions are very low to the benet of the user and his immediate
surroundings!
Finally, PELLENC Brushless motors often drive the cutting element directly (no clutch or reduction
gearbox, meaning less noise and wear). Motor control is electronic, as is the power supply, meaning that
noises linked to mechanical part movements are extremely limited.
By using PELLENC battery and motor technology, you benet from several advantages:
- energy savings
- ease and comfort of use
- free from motor maintenance
- power equivalent to and often higher than combustion engines
- extremely protable tools
- lightweight
- no noise pollution or odors
- virtually inexistent carbon emissions
- Immediate start-up, no need for a starter.
PELLENC OFFERS TECHNOLOGY WHICH MAKES THE HEAT ENGINE OBSOLETE
7
56_10_037B
INTRODUCTION
OUR RANGE OF PRODUCTS
PELLENC Green and City Technology develops new products every year in an aim to meet the
requirements of professionals.
Today, our range of products is growing and our engineers are doing their utmost to create tools, thus
pushing technology advances further.
Our passion is innovation, with an aim to improve the working quality and conditions for professionals by
supplying a complete range of powerful, lightweight, easy-to-handle and very protable tools:
- our blowers operate quietly with power modulation.
- our hedge-trimmers combine comfort and performance.
- our grass-cutting brush cutters are robust and multi-functional.
- our chainsaws are lightweight, powerful and very easy to handle.
- our pruning shears are the most powerful in the world.
- our hoeing machines, which are unique in the world, replace cumbersome rotary hoes.
- our olive harvesters are exceptionally efcient.
- our vine tying machine combines efciency and protability.
- our batteries have a very high autonomy.
- our mobile solar panel offers the possibility to charge your batteries anywhere.
- Exceptional light output of our autonomous lighting systems.
All of our tools have minimal CO2 emissions and meet the requirements of Local Collectivities or other
associations in terms of a sustainable environment and ecology.
PELLENC is the only company to propose a full range of tools which are 100 % clean and with zero
CO2 emissions thanks to the SOLERION solar panels which can be used to recharge our batteries.
Loading...