Pelco S-WMVE-SR-P, WMVE-SR, WMVE-WT User Manual

INSTALLATION

WMVE-SR/WMVE-WT Rugged Environmental Wall Mounts

C2253M (1/11)

Important Safety Instructions

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Only use attachments/accessories specified by the manufacturer.

6. Installation should be done only by qualified personnel and conform to all local codes.

7. Use only installation methods and materials capable of supporting four times the maximum
specified load.

8. Only use replacement parts recommended by Pelco.

2 C2253M (1/11)

Description

The WMVE-SR and WMVE-WT are environmental wall mounts that can be installed directly to a wall or
any vertical surface. Power and video wiring can be easily routed through the back of the mounts or
through the conduit access located on the bottom of the mount arms. The wall mounts can also be pole
mounted using a PA101 pole mount adapter.

MODELS

WMVE-SR Light gray wall mount specifically designed for use with the IM-VEPM, IE-P, and

Camclosure

WMVE-WT White wall mount specifically designed for use with the ID-P pendant mount adapter.

PARTS LIST

The following installation tools and parts are supplied:

Qty Description

1 WMVE-SR/WMVE-WT wall mount

1 Tube of anti-seize lubricant

1 Installation manual

USER SUPPLIED PARTS LIST

Qty Description

1 Pendant mount adapter

1 Wrench, 5/64-inch, hex Allen

2 to 4 Fasteners, 1/4-inch, of appropriate type based on installation

®

2 Series pendant mount adapters.

C2253M (1/11) 3