Pelco WM3026 Specsheet
PRODUCT SPECIFICATION
WM3026 Mount
WALL MOUNT, EXTRA HEAVY DUTY, PAN/TILT AND ENCLOSURE
camera solutions
Product Features
• Aluminum Construction
• Maximum Load 300 Pounds (136.08 kg)
• For Use with Heavy Duty Pan/Tilts and Enclosures
• Built-in Gusset Provides Added Support and Ample Space for
Mounting an External Receiver
• Two 3/4-Inch NPT Threaded Holes on Side of Mount Arm
Accommodate Flexible Metal Conduit Connectors
• Adjustable Head Easily Removed for Use with Heavy Duty Pan/Tilt –
No Special Adapters Required
The
WM3026
wall mount has been designed specifically for use with
Pelco’s heavy duty pan/tilts and/or enclosures. Manufactured from
0.25-inch (6.35 mm) aluminum, the
WM3026
is capable of supporting
a maximum load of 300 pounds (136.08 kg) and can be safely mounted
to any vertical load-bearing surface.
The
WM3026
includes an adjustable mounting head, built-in pan/tilt
adapter and gusset for added support. This flexible design allows
you to simply remove the adjustable head for heavy duty pan/tilt
applications – no special mounting adapters are required. In addition,
the gusset can be utilized for mounting a standard receiver in close
proximity to the camera, enclosure, and/or pan/tilt.
In addition, the two 3/4-inch NPT threaded holes on the sides of the
mount arm will accommodate flexible metal conduit in applications
where cabling must be installed externally to the mounting surface.
20.88
(53.04)
6.5
(16.51)
6.5
(16.51)
8.31
(21.11)
8.50
(21.59)
8.31
(21.11)
28.75 (73.02)
5.87
(14.91)
7.00
(17.78)
27.31 (69.37)
7.00
(17.78)
16.00
(40.64)
C258 / REVISED 1-05
5.50
(13.97)
(15.24)
NOTE: VALUES IN PARENTHESES ARE CENTIMETERS;
ALL OTHERS ARE INCHES.
International Standards
Organization Registered Firm;
ISO 9001 Quality System
6.00
TECHNICAL SPECIFICATIONS
MODEL
WM3026 Extra heavy duty wall mount for use with pan/
MECHANICAL
Pan Adjustment 360°
Tilt Adjustment ±90°
Cable Entry One cable entry hole on top of mount arm; two
Suggested
Mounting Method Secure to wall with six 3/8-inch diameter
GENERAL
Maximum Load 300 lb (136.08 kg)
Construction 0.25-inch (6.35 mm) aluminum
Finish Gray polyester powder coat
Environment Indoor/outdoor
Unit Weight 15.6 lb (7.1 kg)
Shipping Weight 23 lb (10.42 kg)
tilts and/or enclosures
3/4-inch NPT threaded holes (one on each
side) for conduit. Cable may also enter the
mounting arm directly through cutout on
mounting plate. Three hole plugs provided to
cover unused holes.
fasteners of suitable size (not supplied)
COMPATIBLE RECEIVERS
The following standard receivers (indoor or outdoor models) can be mounted
to the WM3026:
CX9024RX Series
CX9115RX Series
CX9220RX Series
ERD97P21-U
Pelco, Inc. Worldwide Headquarters:
3500 Pelco Way, Clovis, California 93612-5699 USA
USA & Canada
International
www.pelco.com
Tel: (800) 289-9100 • FAX: (800) 289-9150
Tel: +1 (559) 292-1981 • FAX: +1 (559) 348-1120
Pelco and the Pelco logo are registered trademarks of Pelco, Inc.
Product specifications and availability subject to change without notice.
©Copyright 2005, Pelco, Inc. All rights reserved.
Loading...