Pelco Vx Ops Center v3.19 Keyboard Shortcuts ae-spec-sheets
VideoXpert® OpsCenter v 3.19
Keyboard Shortcuts
G910 Keyboard
1
Enhanced Keyboard part number is Y-U0023-G910KBD; Enhanced Keyboard and 3D Mouse
Combination Kit part number is A1-KBD-3D-KIT2.
VxOpsCenter recognizes Logitech keyboard models G910 or G710. When one of these keyboards is
plugged in, and you save a tab or workspace, you are presented with additional Logitech-specific options
(M1G1 through M3G6) in addition to standard keyboard shortcuts including "CTRL+SHIFT+1". No
additional keyboard programming is required, unless you will configure the special macro keys as
custom shortcuts.
To configure the macro keys as custom shortcuts:
1
1. Install the Logitech software for the keyboard
2. In the Logitech software, configure the key (for example:G3)with a valid key combination (for
example:Ctrl+Shift+P).
3. In the shortcut customization dialog, type the key combination, and then press the (G3) key.
The configured key combination will display in the shortcut dialog; in this example, Ctrl+Shift+P is
displayed instead of G3. The action can then be launched with the configured (G3) key or the valid
key combination.
To use the standard keyboard controls, see Table 1: Default Camera Controls (PTZ), Table 2: Default
Tab Navigation, Table 3: Default CellContents and Layout, and Table 4: Default Playback Controls.
Table 1: Default Camera Controls (PTZ)
Shortcut Action
Enter Enter/exit PTZ Mode.*
Alt + Enter Enter/exit Digital PTZ Mode.*
Esc Toggle between Playback/PTZ and Navigation modes.*
C6607M-T | 12/22 1
VideoXpert® OpsCenter v 3.19 Keyboard Shortcuts
Shortcut Action
Home
Camera in cell:Send the camera to its home (Preset 1) position of a PTZ camera,
whether or not the camera is in PTZ mode.
Map in cell:Go to the home position of the map.
Ctrl + L Lock/unlock PTZ camera.
Left Arrow When PTZ is enabled, pan/nudge video.*
Right Arrow When PTZ is enabled, pan/nudge video.*
Up Arrow When PTZ is enabled, tilt/nudge video.*
Down Arrow When PTZ is enabled, tilt/nudge video.*
Ctrl + B When PTZis enabled, and If supported by the camera, toggle between zoom-to-box
mode and virtual joystick mode.
Page Up Zoom in.*
Page Down Zoom out.*
Ctrl + I Open iris.
Ctrl + Shift +I Close iris.
Ctrl + F Focus in.
Ctrl + Shift + F Focus out.
Ctrl + Shift + M Center the selected camera on a map.
N
Camera in cell:Take a snapshot.*
Map in cell:Launch the selected cameras.*
*This shortcut is also available in VxPlayer.
Table 2: Default Tab Navigation
Shortcut Action
Esc Toggle between Playback/PTZ and Navigation modes.
Ctrl +T Create a new tab.
Ctrl +S Save the current tab.
Ctrl +Alt +S Save As for the current tab.
Ctrl +F4 Close the current tab.
Ctrl +Tab Go to the next tab.
Ctrl +Shift+Tab Go to the previous tab.
Ctrl +Shift +E Toggle full-screen tab mode
C6607M-T | 12/22 2
VideoXpert® OpsCenter v 3.19 Keyboard Shortcuts
Table 3: Default CellContents and Layout
Shortcut Action
Insert Add a source to a cell by ID.
Enter Add a source to a cell by ID from the Call Up Camera/Time dialog.
Delete Close a video stream.*
Ctrl + E Enter/Exit fullscreen mode.*
Esc Exit fullscreen mode.*
Alt + A Toggle the Show Analytics Drawing Data Analytics Overlay in the current cell.*
Shift +Alt +A Toggle the Show Analytics Drawing Data Analytics Overlay in all cells.
Alt + M Toggle the Simple-Motion Data Analytics Overlay in the current cell.*
Shirt +Alt +M Toggle the Simple-Motion Data Analytics Overlay in all cells.
Ctrl + Del Close all video streams in the selected window.*
Ctrl + O Open the tooltip for the selected cell.
Ctrl + “+” Cycle layout; 1 up becomes 2 x 2, and so on.
Ctrl + “-” Cycle layout in reverse order; 2 x 2 becomes 1 up, and so on.
Ctrl + J Toggle stream statistics within a cell.
Ctrl + Shift + J Toggle stream statistics in all cells.
Ctrl + Shift + S Save the current window or workspace; if the current workspace does not yet exist,
opens the Save As dialog.
Ctrl + 1 Display in 1 x 1 layout.*
Ctrl + 2 Display in 2 x 2 layout.*
Ctrl + 3 Display in 3 x 3 layout.
Ctrl + 4 Display in 4 x 4 layout.
Ctrl + 5 Display in 1 x 2 layout.
Ctrl + 6 Display in 3 x 2 layout.
Ctrl + 7 Display in 2 x 3 layout.
Ctrl + 8 Display in 4 x 3 layout.
Ctrl + 9 Display in 2 x 1 layout.
Ctrl + 0 Display in 1 + 5 layout.
# + M Select a monitor to receive a camera that you will send.
# + C Select a cell in a the monitor to receive a camera that you will send (use with # + M).
# + Enter Open a camera in a cell.
C6607M-T | 12/22 3
VideoXpert® OpsCenter v 3.19 Keyboard Shortcuts
*This shortcut is also available in VxPlayer.
Table 4: Default Playback Controls
Shortcut Action
Spacebar Enter playback mode; when in playback mode, play/pause video.*
Alt + Enter Engage playback at the specified 24-hour time.
Alt Hold and click fast forward or fast reverse icons to jump to the next or previous
recording; Alt only works this way for on-screen controls, not for the fast forward or
reverse keys or 3D mouse operations.
Alt +Up Arrow View the next camera—the camera with the next camera number.
Alt +Down
View the previous camera—the camera with the previous camera number.
Arrow
Up Arrow Play.*
Down Arrow Pause.*
Ctrl + Alt + P Toggle synchronized playback for the current tab.
Alt + Spacebar
Reverse video at normal speed.*
or Alt + P
L Jump to live video.
Shift +Left
Arrow
Hold down the shift key and click the arrow to play video at fractional speeds (1/2,
1/4, 1/8).*
Left Arrow Fast reverse; press multiple times to increase playback speed.
U Reverse video 1 frame.*
I Advance video 1 frame.*
Shift + Right
Arrow
Hold down the shift key and click the arrow to play video at fractional speeds (1/2,
1/4, 1/8).*
Right Arrow Fast forward; press multiple times to increase playback speed.*
A Jump back 1 hour.*
S Jump back 30 minutes.*
D Jump back 1 minute.*
F Jump back 30 seconds.*
G Jump forward 30 seconds.*
H Jump forward 1 minute.*
J Jump forward 30 minutes.*
K Jump forward 1 hour.*
C6607M-T | 12/22 4
Loading...