Pelco VS5104 Specsheet

PRODUCT SPECIFICATION

VS5108

VS5108 REAR VIEW

VS5100 Series Switcher

SEQUENTIAL, VIDEO

analog systems and controls

Product Features

• 120 VAC Input Only

• 4 or 8 Inputs (Terminating or Looping)

• Single Output (VS5104/VS5108)

• For use with Color or Black-White Cameras

• Capable of Operating on 12 VDC for Use in Mobile Applications

The VS5104/VS5108 are low cost, desktop, sequential switchers
designed to switch four or eight cameras manually or automatically
to one monitor.

The VS5104/VS5108 models feature terminating inputs (which can
easily be converted to looping inputs for applications requiring
looping switchers), adjustable dwell (from approximately 1 to
70 seconds), vertical interval switching, and bypass capability. They
are powered by UL Listed external wall transformers (included).

International Standards

Organization Registered Firm;

ISO 9001 Quality System

C808 / REVISED 9-4-12

TECHNICAL SPECIFICATIONS

Pelco, the Pelco logo, and other tra demarks associated with Pelco products referred

to in this publication are trademarks of Pelco, Inc. or its affiliates. All other

product names and services are the pro perty of their respective companies.

Product specifications and availability are subject to change without notice.

©Copyright 2012, Pelco, Inc. All rights reserved.

MODELS

VS5104 4-input, single output sequential switcher

without alarm inputs,

VS5108 8-input, single output sequential switcher

without alarm inputs,

VIDEO

Inputs Terminating; 75-ohm internal termination
Outputs 75-ohm source terminated (amplified)
Gain Unity
Dwell Adjustable from 1 to 70 seconds nominal
Frequency Response Flat within ±1 dB to 10 MHz
Maximum Signal Level 2 Vp-p
Tilt Less than 2%
Crosstalk Better than –40 dB at 5.5 MHz

ELECTRICAL

Input Voltage 120 VAC, 50/60 Hz to dedicated wall

transformer
Power Requirements
for Transformer 1.5 VA (0.125 A) at 12 V RMS ±15%, 50/60 Hz

from a dedicated isolated power source (wall

transformer included)

Note: These units are also capable of

operating on 12 VDC for use in mobile

applications.
Connectors BNC

GENERAL

Construction

Chassis Steel, zinc plated
Cover Steel, black polyester powder coat
Panel Aluminum, black polyester powder coat,

white silk screen
Environment 0° to 49°C (32° to 120°F)
Dimensions
VS5104 22.38 x 14.00 x 4.50 cm

(8.81" D x 5.51" W x 1.77" H)
VS5108 23.50 x 21.87 x 4.50 cm

(9.25" D x 8.61" W x 1.77" H)
Unit Weight

VS5104 1.15 kg (2.53 lb)
VS5108 1.73 kg (3.82 lb)

Shipping Weight

VS5104 1.81 kg (4 lb)
VS5108 2.27 kg (5 lb)

CERTIFICATIONS/RATINGS

• FCC, Class A

• UL Listed

• Meets NEMA Type 1 standards

Pelco by Schneider Electric

3500 Pelco Way, Clovis, California 93612-5699 United States

USA & Canada Tel [phone] Fax [phone]
International Tel [phone] Fax [phone]
www.pelco.com