Pelco VideoXpert Storage R-Series Quick Start Guide Document quick-start-guides

Before You Begin

Before you connect and configure your system:

l

Update your new VideoXpert™ Software to the latest version, which is available at

www.pelco.com.

l

Ensure that the Microsoft OS on each computer on your system, including this server, has the
latest updates that address the most current known vulnerabilities. You can find this information at

www.microsoft.com.

On a continual basis:

l

Frequently update the OS to ensure newly discovered vulnerabilities are patched as soon as a
patch is available.

l

Frequently update anti-virus libraries with the latest patches.

Performing Initial System Configuration

VideoXpert™ Storage

QuickStart Guide

Your system comes fully prepared for use with all drives and software installed. Plug in your system, and
you are ready to begin using VideoXpert. For more information about your VideoXpert™ hardware and
software, go to www.pelco.com.

Locating Connections on the Front Panel

VxStorage R-Series Server (VXS2-R), 8 drives

1 Power button 3 VGAmonitor connection

2 USB 2.0 port 4 USB management port/iDRAC Direct

920-0422A rev1 | 04/22 1

VideoXpert™ Storage QuickStart Guide

VxStorage E-Series Server (VXS2-E), 18 drives

1 Power button 3 USB 2.0 ports

2 VGAmonitor connection 4 USB management port/iDRAC Direct

Locating Connections on the Back Panel

VxStorage R-Series Server (VXS2-R), 8 drives

1 RJ-45 ports (10/100/1000 Mbps) 4 SFP+ports (10 Gbps)

2 iDRAC port 5 VGAmonitor connection

3 USB 2.0 port (top) and USB 3.0 port

(bottom)

6 Power connection

7 Solid State Drives (SSD)

VxStorage E-Series Server (VXS2-E), 18 drives

920-0422A rev1 | 04/22 2