Pelco VideoXpert OpsCenter v 3.14 Keyboard Shortcuts

VideoXpert® OpsCenter v 3.14

Keyboard Shortcuts

G910 Keyboard

1

Enhanced Keyboard part number is Y-U0023-G910KBD; Enhanced Keyboard and 3D Mouse

Combination Kit part number is A1-KBD-3D-KIT2.

VxOpsCenter recognizes Logitech keyboard models G910 or G710. When one of these keyboards is
plugged in, and you save a tab or workspace, you are presented with additional Logitech-specific options
(M1G1 through M3G6) in addition to standard keyboard shortcuts including "CTRL+SHIFT+1". No
additional keyboard programming is required, unless you will configure the special macro keys as
custom shortcuts.

To configure the macro keys as custom shortcuts:

1

1. Install the Logitech software for the keyboard

2. In the Logitech software, configure the key (for example:G3)with a valid key combination (for
example:Ctrl+Shift+P).

3. In the shortcut customization dialog, type the key combination, and then press the (G3) key.

The configured key combination will display in the shortcut dialog; in this example, Ctrl+Shift+P is
displayed instead of G3. The action can then be launched with the configured (G3) key or the valid
key combination.

To use the standard keyboard controls, see Table 1: Default Camera Controls (PTZ), Table 2: Default

Tab Navigation, Table 3: Default CellContents and Layout, and Table 4: Default Playback Controls.

Table 1: Default Camera Controls (PTZ)

Shortcut Action

Enter Enter/exit PTZ Mode.*

Alt + Enter Enter/exit Digital PTZ Mode.*

Esc Toggle between Playback/PTZ and Navigation modes.*

C6607M-O | 9/21 1

VideoXpert® OpsCenter v 3.14 Keyboard Shortcuts

Shortcut Action

Home

Camera in cell:Send the camera to its home (Preset 1) position of a PTZ camera,
whether or not the camera is in PTZ mode.

Map in cell:Go to the home position of the map.

Ctrl + L Lock/unlock PTZ camera.

Left Arrow When PTZ is enabled, pan/nudge video.*

Right Arrow When PTZ is enabled, pan/nudge video.*

Up Arrow When PTZ is enabled, tilt/nudge video.*

Down Arrow When PTZ is enabled, tilt/nudge video.*

Ctrl + B When PTZis enabled, and If supported by the camera, toggle between zoom-to-box

mode and virtual joystick mode.

Page Up Zoom in.*

Page Down Zoom out.*

Ctrl + I Open iris.

Ctrl + Shift +I Close iris.

Ctrl + F Focus in.

Ctrl + Shift + F Focus out.

Ctrl + Shift + M Center the selected camera on a map.

N

Camera in cell:Take a snapshot.*

Map in cell:Launch the selected cameras.*

*This shortcut is also available in VxPlayer.

Table 2: Default Tab Navigation

Shortcut Action

Esc Toggle between Playback/PTZ and Navigation modes.

Ctrl +T Create a new tab.

Ctrl +S Save the current tab.

Ctrl +Alt +S Save As for the current tab.

Ctrl +F4 Close the current tab.

Ctrl +Tab Go to the next tab.

Ctrl +Shift+Tab Go to the previous tab.

Ctrl +Shift +E Toggle full-screen tab mode

C6607M-O | 9/21 2

VideoXpert® OpsCenter v 3.14 Keyboard Shortcuts

Table 3: Default CellContents and Layout

Shortcut Action

Insert Add a source to a cell by ID.

Enter Add a source to a cell by ID from the Call Up Camera/Time dialog.

Delete Close a video stream.*

Ctrl + E Enter/Exit fullscreen mode.*

Esc Exit fullscreen mode.*

Alt + A Toggle the Show Analytics Drawing Data Analytics Overlay in the current cell.*

Shift +Alt +A Toggle the Show Analytics Drawing Data Analytics Overlay in all cells.

Alt + M Toggle the Simple-Motion Data Analytics Overlay in the current cell.*

Shirt +Alt +M Toggle the Simple-Motion Data Analytics Overlay in all cells.

Ctrl + Del Close all video streams in the selected window.*

Ctrl + O Open the tooltip for the selected cell.

Ctrl + “+” Cycle layout; 1 up becomes 2 x 2, and so on.

Ctrl + “-” Cycle layout in reverse order; 2 x 2 becomes 1 up, and so on.

Ctrl + J Toggle stream statistics within a cell.

Ctrl + Shift + J Toggle stream statistics in all cells.

Ctrl + Shift + S Save the current window or workspace; if the current workspace does not yet exist,

opens the Save As dialog.

Ctrl + 1 Display in 1 x 1 layout.*

Ctrl + 2 Display in 2 x 2 layout.*

Ctrl + 3 Display in 3 x 3 layout.

Ctrl + 4 Display in 4 x 4 layout.

Ctrl + 5 Display in 1 x 2 layout.

Ctrl + 6 Display in 3 x 2 layout.

Ctrl + 7 Display in 2 x 3 layout.

Ctrl + 8 Display in 4 x 3 layout.

Ctrl + 9 Display in 2 x 1 layout.

Ctrl + 0 Display in 1 + 5 layout.

# + M Select a monitor to receive a camera that you will send.

C6607M-O | 9/21 3

VideoXpert® OpsCenter v 3.14 Keyboard Shortcuts

Shortcut Action

# + C Select a cell in a the monitor to receive a camera that you will send (use with # + M).

# + Enter Open a camera in a cell.

*This shortcut is also available in VxPlayer.

Table 4: Default Playback Controls

Shortcut Action

Spacebar Enter playback mode; when in playback mode, play/pause video.*

Alt + Enter Engage playback at the specified 24-hour time.

Alt Hold and click fast forward or fast reverse icons to jump to the next or previous

recording; Alt only works this way for on-screen controls, not for the fast forward or
reverse keys or 3D mouse operations.

Alt +Up Arrow View the next camera—the camera with the next camera number.

Alt +Down

View the previous camera—the camera with the previous camera number.

Arrow

Up Arrow Play.*

Down Arrow Pause.*

Ctrl + Alt + P Toggle synchronized playback for the current tab.

Alt + Spacebar

Reverse video at normal speed.*

or Alt + P

L Jump to live video.

Shift +Left
Arrow

Hold down the shift key and click the arrow to play video at fractional speeds (1/2,
1/4, 1/8).*

Left Arrow Fast reverse; press multiple times to increase playback speed.

U Reverse video 1 frame.*

I Advance video 1 frame.*

Shift + Right
Arrow

Hold down the shift key and click the arrow to play video at fractional speeds (1/2,
1/4, 1/8).*

Right Arrow Fast forward; press multiple times to increase playback speed.*

A Jump back 1 hour.*

S Jump back 30 minutes.*

D Jump back 1 minute.*

F Jump back 30 seconds.*

C6607M-O | 9/21 4

VideoXpert® OpsCenter v 3.14 Keyboard Shortcuts

Shortcut Action

G Jump forward 30 seconds.*

H Jump forward 1 minute.*

J Jump forward 30 minutes.*

K Jump forward 1 hour.*

B

Camera in cell:Add bookmark.

Map in cell:Select cameras in the view.

Shift + Alt +

Jump to next bookmark.

Right Arrow

Shift + Alt + Left

Jump to previous bookmark.

Arrow

Ctrl +Right
Arrow

When in live sequence mode, pauses the sequence and jumps to the next camera in
the sequence.

Ctrl +Left Arrow When in live sequence mode, pauses the sequence and jumps to the previous

camera in the sequence.

Ctrl +Alt + Right

Jump to next clip.*

Arrow

Ctrl +Alt +Left

Jump to previous clip.*

Arrow

*This shortcut is also available in VxPlayer.

C6607M-O | 9/21 5

VideoXpert® OpsCenter v 3.14 Keyboard Shortcuts

LogitechExtreme 3DPro Joystick

2

2

Order the Logitech Extreme 3D Pro Joystick from a third-party.

The joystick moves directionally and twists; each action performs a different function depending on your
viewing mode. Press the Toggle Navigation Mode button when in PTZ or Playback modes to escape the
current cell and navigate the workspace without exiting PTZ or Playback in the current cell.

Directional controls:

l

Navigation Mode—Move between cells.

l

PTZ—Pan and tilt the selected camera.

l

Mapping—Move around the map.

l

Playback

–

Move the joystick left or right to pause video and rewind or advance video frame-by-frame;
move the joystick up to play back video at normal speed; move the joystick down to pause the
video.

–

Move the hat switch right or left to engage fast-forward or fast-reverse playback. Move hat
switch again or hold to increase playback speed. Hold down the shift key and move the hat
switch right or left to engage forward or reverse playback at fractional speeds (for example:

C6607M-O | 9/21 6

VideoXpert® OpsCenter v 3.14 Keyboard Shortcuts

1/2, 1/4, 1/8). Move the hat switch up to play back video at normal speed; move the hat switch
down to pause the video.

l

Date/time selector—Move the joystick or hat switch up or down to change the values of the date or
time in the Date/Time selector; move the joystick or hat switch side to side to move between fields
within the date or time selection.

Twist controls:

l

Mapping—Zoom the map in or out when PTZis enabled.

l

Playback—Engage fast-forward or fast-reverse playback; twist again or twist and hold to increase
playback speed.

l

Playback at fractional speeds—Engage forward or reverse playback at fractional speeds (for
example:1/2, 1/4, 1/8). Hold down the shift key and twist the joystick clockwise or
counterclockwise to select the speed. To return to full speed, turn the joystick all the way
clockwise or counterclockwise.

l

Date/time selector—Twist the joystick left or right to move between the date and time fields.

Button controls are explained in Table 5: LogitechExtreme 3DJoystick Button Controls.

Table 5: LogitechExtreme 3DJoystick Button Controls

Button Action

Snapshot

Camera in cell: Take a snapshot.

Map in cell: Launch the selected cameras.

Shift + Close iris Close the camera iris, available when PTZis enabled.

Hat switch, 8-way

Bookmark

Perform pan/tilt function, but limited to eight directions.

Camera in cell: Add a bookmark.

Map in cell: Select cameras in the view.

Shift +Open iris

Open the camera iris, available when PTZis enabled.

Next camera View the camera with the next camera number.

Shift +Focus in

When PTZ is enabled, focus in.

Previous camera View the camera with the previous camera number.

Shift +Focus out When PTZis enabled, focus out.

Activate PTZ

TogglePTZmode on and off.

When using the Date/Time selector, "Go".

Toggle navigation mode Toggle between Playback/PTZ and Navigation modes.

Last camera Go to the last camera used.

Shift +Show help View help information.

Home Camera in cell: Send a PTZ camera to its “Home” (Preset1) position when

PTZ isenabled.

Map in cell: Go to the home position of the map.

C6607M-O | 9/21 7

VideoXpert® OpsCenter v 3.14 Keyboard Shortcuts

Button Action

Fullscreen Toggles full screen view on and off.

Live/Playback Toggle between live and playback modes.

Jump to Date/Time Open the date/time selector.

Shift +button Activates alternate action for the button.

C6607M-O | 9/21 8

VideoXpert® OpsCenter v 3.14 Keyboard Shortcuts

SpaceMouse Pro Controls

3

Enhanced 3D Mouse and Joystick part number is 3DX-600-3DMOUSE; Enhanced Keyboard and 3D

3

Mouse Combination Kit part number is A1-KBD-3D-KIT2.

The joystick on the SpaceMouse Pro moves directionally and twists; each action performs a different
function depending on your viewing mode. Press down on the joystick when in PTZ or Playback modes
to escape the current cell and navigate the workspace without exiting PTZ or Playback in the current cell.

Directional controls:

l

Navigation Mode—Move between cells.

l

PTZ—Pan and tilt the selected camera.

l

Mapping—Move around the map.

l

Playback—Move the joystick left or right to pause video and rewind or advance video frame-by­frame; move the joystick up to play back video at normal speed; move the joystick down to pause
the video.

l

Date/time selector—Move the joystick up or down to change the values of the date or time in the
date/time selector; move the joystick side to side to move between fields within the date or time
selection.

Twist controls:

l

Mapping—Zoom the map in or out when PTZis enabled.

l

Playback—Engage fast-forward or fast-reverse playback; twist again or twist and hold to increase
playback speed.

l

Playback at fractional speeds—Engage fast-forward or fast-reverse playback at fractional speeds
(for example:1/2, 1/4, 1/8). Hold down the shift key and twist the joystick clockwise or
counterclockwise to select the speed. To return to full speed, turn the joystick all the way
clockwise or counterclockwise.

l

Date/time selector—Twist the joystick left or right to move between the date and time fields.

Button controls are explained in Table 6: SpaceMouse Pro Button Controls.

C6607M-O | 9/21 9

VideoXpert® OpsCenter v 3.14 Keyboard Shortcuts

Table 6: SpaceMouse Pro Button Controls

Shortcut Action

1 N/A

2 Go to the last camera used.

3 When in live mode, pauses the sequence and goes to the previous camera in the

sequence.

4 When in live mode, pauses the sequence and goes to the next camera in the

sequence.

Ctrl Open iris, available when PTZ is enabled.

Esc Close iris, available when PTZ is enabled.

Shift

When PTZ is enabled, focus in.

When PTZ is disabled (playback mode), access fractional speeds.

Alt Focus out, available when PTZ is enabled.

Menu Toggle between live and playback modes.

Camera in cell:Add a bookmark.

Map in cell:Select cameras in the view.

Camera in cell:Take a snapshot.

Map in cell:Launch the selected cameras.

Toggle PTZ Mode. When using the date/time selector, "Go."

Open the date/time selector.

Camera in cell:Send a PTZ camera to its “Home” (Preset 1) position when PTZ is
enabled.

Map in cell:Go to the home position of the map.

Fit Open the selected cell in full screen view.

C6607M-O | 9/21 10

VideoXpert® OpsCenter v 3.14 Keyboard Shortcuts

1

2

abc

ghi

pqrs

tuv

wxyz

jkl

mno

def

3

4

5

6

7

8

0

9

KBD5000 Controls

4

KBD5000 part number is KBD5000.

4

General use of the controls is as follows:

l

Button Colors--When selecting preferences or options, a green button confirms your choice and a
red button cancels it.

l

Jog--Turn clockwise to advance frames and counterclockwise to backspace.

l

Joystick Button--Enter PTZ mode; submit date/time selection; when in playback mode, press to
lock the playback speed. Cancels the camera-call-up dialog, if open.

l

Joystick Directional Controls--Navigate in the interface; when in PTZ mode, use the joystick to pan
and tilt cameras; when in date/time selector, move the joystick up or down to change the date or
time values, and move the joystick side to side to move between fields within the date or time
selection.

l

Joystick Twist--Zoom while in PTZ mode; when in Iris or Focus modes, twist to adjust the iris or
focus; when in date/time selector, twist the joystick left or right to move between the date or time
fields.

l

Shuttle--Turn clockwise to engage fast forward and counterclockwise to engage fast reverse; the
rotation angle increases or decreases the playback speed. To access fractional speeds in forward
and reverse, pause the video, and then turn the shuttle (in the appropriate direction) to select the
speed (for example:1/2, 1/4, 1/8). To return to full speed, turn the shuttle all the way clockwise or
counterclockwise.

Button controls are explained in Table 7: KBD5000 Button Controls.

Table 7: KBD5000 Button Controls

Shortcut Action

0-9 Enter camera number, monitor number, or playback time. If there is no camera 0, you

can enter 0 to disconnect a stream in the Call-up Camera/Time dialog.

Select camera (indicated by number). When using the Call-up Camera/Time dialog,
press to select camera by ID.

Select monitor by number.

C6607M-O | 9/21 11

VideoXpert® OpsCenter v 3.14 Keyboard Shortcuts

Shortcut Action

Toggle 1 x 1 layout.

Toggle 2 x 2 layout; use with number input to select a cell by number.

Toggle 3 x 3 layout.

Toggle 4 x 4 layout.

Camera in cell:Create a bookmark.

Map in cell:Select cameras in the view.

Camera in cell:Take a snapshot.

Map in cell:Launch the selected cameras.

Play/Pause.

Inactive.

Toggle the Time/Day selector. Input a time and then press to engage playback at the
specified 24-hour time.

In PTZ mode--Toggle iris on/off; twist the joystick to adjust the iris. Not in PTZ mode-­Toggle synchronous playback for the active tab.

In PTZ mode--Toggle focus on/off; twist the joystick to adjust focus.

Press when in PTZ or Playback modes to escape the current cell and navigate to the
workspace; when in the workspace, press to return to the PTZ or Playback mode.
Hold to access keyboard shortcut information.

Camera in cell:Send a PTZ camera to its “Home” (Preset 1) position when PTZ is
enabled.

Map in cell:Go to the home position of the map when PTZis enabled.

When in live sequence mode, pauses the sequence and goes to the previous camera
in the sequence.

When in live sequence mode, pauses the sequence and goes to the next camera in
the sequence.

Go to the last viewed camera.

Engage full-screen mode.

C6607M-O | 9/21 12

VideoXpert® OpsCenter v 3.14 Keyboard Shortcuts

Pelco, Inc.

625 W. Alluvial Ave., Fresno, California 93711 United States

[phone] Tel
[phone] Fax
[phone] International Tel
[phone] International Fax

www.pelco.com

Pelco, the Pelco logo, and other trademarks associated with Pelco products referred to in this publication are trademarks of Pelco,
Inc. or its affiliates. ONVIF and the ONVIF logo are trademarks of ONVIF Inc. All other product names and services are the property of
their respective companies. Product specifications and availability are subject to change without notice.

© Copyright 2021, Pelco, Inc. All rights reserved.