Pelco VBP3000 User Manual

VBP3000VBP3000

VBP3000

VBP3000VBP3000

VIDEO IN A BAG SYSTEM WITH DETACHABLE 5" LCD

TV/MONITOR AND VIDEO CASSETTE PLAYER

A. Introduction

Thank you for selecting this “Video in a Bag” System. The system's main features include two 5" Liquid Crystal Display (LCD) TV/Monitors and Video Cassette Player (VCP) (see page 4 for a detailed feature list). The system utilizes the latest state of the art electronics and is designed for use in vehicles, hotels, offices or your home. The “Video in a Bag” System is constructed to provide years of reliable, trouble-free service. The system is compact so that you can take it with you anywhere and is designed for quick and easy installation. The system comes with two detachable displays that can be utilized and stored separately from the main unit. An additional monitor can be purchased and added to the system setup allowing you to utilize three monitors at once (two external and one attached). The connection of the additional is plug & play.

Please read the entire instruction manual supplied with this product prior to operation. The documentation will assist you in installing the system properly to obtain the best equipment performance. All manuals should be stored for later use.

B. Precautions

1. The “Video in a Bag” System MUST be powered from switched “Accessory” power (i.e. not directly from the car battery). Power should be applied to the unit when the

ignition key is in the Run and/or Accessory positions. NOTE: To prevent battery discharge, disconnect the “Video in a Bag” System jack from

the cigarette lighter socket when the unit is not in use.

2. IMPORTANT!: There are two short Velcro straps located inside the bag. These straps are used to anchor the system securely inside the bag using the loop brackets on either side of the system. This will prevent the system from falling out and being damaged in transport or while in use in your vehicle.

3. Ensure that the LCD TV/Monitor, VCP and the Bag are installed in accordance with the instructions and illustrations provided in this manual.

4. The “S” hooks and all straps must be fastened correctly to secure the system in the vehicle in the event of an accident.

5. Operate the “Video in a Bag” System with the Bag open to ensure proper ventilation

of the monitor and the VCP.

6. The system intended to be mounted for rear seat viewing only. DO NOT USE THE SYSTEM IN THE FRONT SEAT WHILE OPERATING YOUR VEHICLE.

C. Cautions and Warnings

1. Cleaning Video Head

To prevent video head clogging, use only good quality VHS tapes and discard worn out tapes. If the heads become dirty over a period of time during normal operation of the VCP, the picture will be snowy and the auto-tracking will not adjust the picture correctly. We recommend using cleaning cartridges sparingly to restore normal picture.

2. Placement

To prevent fire or electric shock, do not expose this appliance to rain, moisture or long periods of direct sunlight. Keep the unit away from radiators or other sources of heat. Do not operate or store the unit close to strong magnetic fields. Do not place the set on an unstable cart, stand, tripod, bracket or table to prevent it from falling.

3. Ventilation

To ensure proper ventilation, never cover or block the slots and openings with a cloth or other material.

4. Object and Liquid Entry

Do not push objects of any kind into the system through openings; do not spill or spray liquid of any kind on or in the system (this may result in a fire or electric shock). Do not place anything heavy on the unit.

5. Disassemble

To reduce the risk of electric shock, do not remove the cover (or back). No userserviceable parts inside. Contact qualified service personnel if your system is in need of repair.

6. Cleaning Unit

When cleaning, make sure the system is unplugged from power source. Do not use liquid cleaners or aerosol cleaners. Use a cloth lightly dampened with water for cleaning the exterior of the system only.

7. Power

This system should be operated only from the type of power source indicated on the marking label. Use only the supplied power cable matching this set to avoid electric hazards. When the system is left unattended and unused for long periods of time, unplug it from the power source. Always disconnect the power source first and then the jack from the system.

8. Cassette

Do not force a cassette into the compartment when the power cord is unplugged. An inverted cassette cannot be inserted. After playing a videocassette, remove it from the player. Store videocassettes in the sleeves or cases and in upright position.

INST

INSTINST

INSTINST ALL

ALLALL

ALLALL A

ION INSTRUC

ION INSTRUCION INSTRUC

IONS

IONSIONS

D. Feature List

1.) One Video Cassette Player with Built In VHF/UHF/CATV Tuner system

2.) Two 5" LCD Monitors with AUX Inputs

3.) One Infra Red Remote Control

4.) One Bag (for carrying the unit and accessories)

5.) One Set of Straps for Mounting

6.) Two Pouches (for the detachable monitors)

7.) One DC Power Adaptor (cigarette lighter adapter)

8.) One AC to DC Power Adapter (two piece set)

9.) Two DIN Cable

10.) One Dipole Antenna

11.) One Slip-on COAX Connector

12.) Two Headphone Jacks

Figure 1

E. Powering the Unit

1. Refer to Figure 1. Unzip the lower compartment of the bag and take out the AC/ DC adapter. Plug one end of the AC to DC adapter into 110 VAC power receptacle and the other end into the DC IN 12V jack on the rear of the system.

2. Refer to Figure 2. For use in a vehicle, take the cigarette lighter socket adapter from the lower compartment, plug one end into the DC IN 12V jack on the rear of the unit, slide the cord through the slot in the bag, and plug the other end into the cigarette lighter socket.

Figure 2

F. Powering the Detached Monitor or the Additional Monitor

1. The attached monitor can be detached from the system by depressing the button below the screen with one hand and removing the monitor with the other (Refer to Figure 13 Item #13.). You may take the additional monitor from the bag. Take the AC/DC adapter from the lower compartment, plug one end into the DC IN 12V jack on the left side of the monitor, and the other end into the power receptacle indoors.

Figure 3

2.Refer to Figure 4. For use in a vehicle, take the cigarette lighter adapter from the lower compartment, plug one end into the DC IN 12V jack on the left side of the monitor and the other end into the cigarette lighter socket.

Figure 4

+ 11 hidden pages