Pelco USRACK Specsheet

PRODUCT SPECIFICATION
transmission & power
EURACK/USRACK Fiber Rack Mounts
CHASSIS FOR FIBER OPTIC MODULES WITH INTERNAL POWER SUPPLY
4 Rack Units (RU) High
Mounts in a EIA-Standard
Holds up to 14 Single-Width Fiber Optic Modules
Hot-Swappable Internal Power Supply
Voltage Transient Protection on All Power and Signal
Input/Output Lines
Optional Blank Modules
Compatible with All FTV/FRV Series Modules
48.26 cm (19-Inch) Rack
The EURACK/USRACK chassis is designed to hold up to 14 single-width fiber optic modules. The internal power supply is 4 RU high. The chassis is designed to mount into an EIA-standard,
48.26 cm (19-inch) rack. Optional single-width blank modules
(RACK1B) can be inserted into empty module slots.
The EURACK/USRACK fiber card cage features automatic electronic current limiting at each module rather than limiting current at the power supply. With this design, if a fiber module fault occurs, only the faulty module will shut down. All other modules within the rack will continue to operate unimpaired.
The automatic current limiting feature of the EURACK/USRACK is also self-resetting. This allows the unit to handle a temporary or intermittent fault or overload. Modules in the chassis are hot-swappable, allowing the rack to remain powered when removing or replacing modules.
International Standards
Organization Registered Firm;
ISO 9001 Quality System
C3926 / REVISED 1-17-13
TECHNICAL SPECIFICATIONS
MODEL
EURACK Rack-mount chassis for up to 14 fiber optic
modules, internal power supply, EU power cord
USRACK Rack-mount chassis for up to 14 fiber optic
modules, internal power supply, US power cord
ELECTRICAL
Input Voltage 90 to 264 VAC at 70 W maximum Output Voltage 9 VDC ± 5% at 6.5 A at 75°C Fuse Rating 1.25 A slow blow (rack power supply); plug-in
modules are individually electronically fused;
each power supply unit is individually fused Power Connector 2-pin, for user-supplied power supply Power Indicator Red LED AC Line Cord Detachable, IEC-connected; allows easy field
replacement or exchange for various AC
power cord configurations MTBF >100,000 hours
ENVIRONMENTAL
Operating Temperature –40° to 75°C (–40° to 167°F) Storage Temperature –40° to 85°C (–40° to 185°F) Operating Humidity 20 to 80%, noncondensing Maximum Humidity Gradient 10% per hour Operating Altitude –16 to 3,048 m (–50 to 10,000 ft) Operating Vibration 0.25 G at 3 Hz to 200 Hz at a sweep rate of
0.5 octave/minute
Heat Generation 240 BTU (full rack average)
GENERAL
Rack Units 4 Construction Aluminum Dimensions 48.2 × 19.0 × 17.5 cm
(19.0" D × 7.5" W × 6.9" H)
Mounting Fits in a
48.26 cm (19-inch)
EIA-standard rack Unit Weight 2.00 kg (4.35 lb) Shipping Weight 2.27 kg (5.00 lb)
CERTIFICATIONS/RATINGS*
• CE, Class A
• FCC, Class A
• UL/cUL Listed
•C-Tick
• Designed to meet NEMA TS 1/TS 2 and Caltrans traffic signal control
equipment environmental sta
*At the time of this
consult the factory, our Web site (www.pelco.com), or the most recent B.O.S.S.
printing, all certifications are pending. Please
®
update for the current status of certifications.
ndards
Pelco by Schneider Electric
3500 Pelco Way, Clovis, California 93612-5699 United States
USA & Canada Tel (800) 289-9100 Fax (800) 289-9150 International Tel +1 (559) 292-1981 Fax +1 (559) 348-1120 www.pelco.com www.pelco.com/community
Pelco, the Pelco logo, and other trad emarks associated with Pelco products referred
to in this publication are trademarks of Pelco, Inc. or its affiliates. ONVIF and the
ONVIF logo are trademarks of ONVIF Inc. All othe r product names and
Product specifications and availability are subject to change without no tice.
services are the property of their respective comp anies.
©Copyright 2013, Pelco, Inc. All rights reserved.
Loading...