Pelco UDI5000-MTRX, UDI5000-MTRX-US Specsheet

PRODUCT SPECIFICATION

video management solutions

Endura® UDI5000-MTRX Universal Device Interface

INTEGRATION PLATFORM FOR THIRD-PARTY SYSTEMS AND MATRIX KEYBOARDS

Product Features

• User-Friendly Web-Based Administration

• Supports Three Operation Modes: ASCII, Matrix Digital Decoder, and

Virtual Matrix

• Diagnostics Available Through Self-Contained Endura

and Simple Network Management Protocol (SNMP)

®

Diagnostics

The UDI5000-MTRX provides users with a powerful means by which
to leverage investments in legacy analog systems and integrations,
while affording customers the benefits of today’s IP and megapixel
camera technologies. The UDI5000-MTRX supports three operating
modes: ASCII mode, Matrix Digital Decoder mode (MDD), and Virtual
Matrix mode (V9700). In ASCII mode, third-party systems interface
with Endura
commands from Pelco’s CM9700 matrix to access and pull live and
recorded Endura video onto matrix monitors through a network
decoder and a third-party video down converter. V9700 mode makes
use of familiar CM9760 keyboards to control Endura devices and
monitors, and takes full advantage of megapixel and HD camera
technology advancements.

®

utilizing the Pelco ASCII protocol. MDD mode processes

ASCII Protocol Management

When operating in ASCII mode, the UDI5000-MTRX allows
third-party systems that integrated with the analog matrix through the
Pelco ASCII protocol to work with Endura. The UDI5000-MTRX in
ASCII mode presents 1,024 virtual alarms that can be configured in
Endura for scripted responses to alarms or to convert ASCII switching
commands to Endura software commands, allowing ASCII-driven
switching of cameras onto Endura monitors.

V9700 Virtual Matrix Mode

In V9700 mode, the UDI5000-MTRX partially simulates a Pelco
CM9780 analog matrix. A traditional PSM file is loaded onto the
UDI5000-MTRX, which also processes Pelco P protocol commands
from CM9760 keyboards and CM9760 alarm interface units connected
through third-party serial to ethernet converters. While operating in
V9700 mode, security administrators can continue leveraging most
standard security operating procedures developed around analog
matrix switches but in a virtual matrix environment. In addition,
operators with previous experience using the CM9760-KBD keyboard
can leverage their past experience and training when switching to a
virtual matrix implementation. The V9700 mode supports Satellite
Matrix Functionality (SMF) through the CM9700-NIU, thus allowing
the Endura system to extend the useful life of existing analog matrix
installations. When configured for V9700-SMF, CM9700 analog video
can be converted and displayed on Endura digital monitors, and digital
video from the Endura system can be converted and displayed on
V9700 analog monitors. Matrix operators can have access to Endura

cameras on matrix monitors, and the ability to call up and switch
matrix cameras and IP cameras onto Endura decoder monitors through
the CM9760-KBD.

Matrix Digital Decoder Mode

In MDD mode, the UDI5000-MTRX bridges Endura products to the
CM9700 Series matrix system (using 9.03.012 software or later
versions). Adding the UDI5000-MTRX with a NET5402R-HD to a
matrix system allows security professionals to leverage the digital
advantages of Endura with their tried and true CM9700 Series matrix
system. This allows users to continue viewing live analog video
through the matrix while viewing digital live or recorded video from
the Endura system through the NET5402R-HD high definition digital
decoder connected as an input on the matrix through a third-party
video down converter.

Convenient Scalability and Packaging

The UDI5000-MTRX supports Endura's unlimited scalability by
providing a deterministic way to manage the processing load
introduced with keyboard integration. Each UDI5000-MTRX can
accommodate up to 10 connections, such as CM9760 Series
keyboards and CM9760 alarm interface units. To provide unrestricted
scalability, each UDI5000-MTRX is an independent server that can
run multiple concurrent connections that are each running multiple
routines. This capacity virtually eliminates undue load on other Endura
servers and system components. UDI5000-MTRX servers can also
act in a hot standby mode where the mission-critical nature of the
installation demands redundancy.

The UDI5000-MTRX server is a half-width, 1 RU server. The compact
size allows for two units to be rack mounted next to each other in just
1 RU of space using the optional rack mount kit. No additional
software licensing is required.

Network Administration and Upgradeability

The UDI5000-MTRX supports Simple Network Management Protocol
(SNMP) monitoring and traps along with Endura diagnostic
monitoring. As such, health status information is available through the
Endura WS5200 advanced system management software or an
external SNMP monitoring application. The UDI5000-MTRX
complies with Endura’s firmware upgrade scheme, allowing
administrators to easily push out updated drivers and other utilities
over the network as they become available from Pelco.

International Standards

Organization Registered Firm;

ISO 9001 Quality System

C4680 / REVISED 3-14-13

TECHNICAL SPECIFICATIONS

MODEL

Use the following table to create a model number to specify your
UDI5000-MTRX. For example, the model number for a unit that includes a
European power cord is UDI5000-MTRX-EU.

Model Country Code

-US = North America

-EU = Europe

UDI5000-MTRX

-UK = United Kingdom

-CN = China

-AU = Australia

-AR = Argentina

SUPPLIED ACCESSORIES

Power Cord 1 power cord (based on country designation)

Note: Units shipped to China do not include
power cords.

OPTIONAL ACCESSORIES

RK-UDI5000 UDI5000 Series rack mount kit: 1 RU rack

mount assembly, hardware, and power supply
support bracket

USER-SUPPLIED ACCESSORIES

In V9700 mode, third-party serial-to-Ethernet converters are required to
connect the CM9760-KBD or CM9760-ALM products to the UDI5000-MTRX.
In MDD mode, both serial-to-Ethernet and Video Down Converters are
required. ASCII mode can use a serial-to-ethernet converter if needed.

SYSTEM

Operating System Embedded Linux

™

NETWORK

Interface 1 Gigabit Ethernet RJ-45

(10/100/1000Base-T)

FRONT PANEL

Power Button On/off
Indicators

Power Blue if power
Network Activity Green, amber, red
Unit Status Green, amber, red

Auxiliary Interface 1 USB 2.0 port

Note: The temperature at the unit air intake can be significantly higher than
room temperature. Temperature is affected by rack configuration, floor
layout, air conditioning strategy, and other issues. To prevent performance
failure and unit damage, make sure the temperature at the unit is
continuously within the operating temperature range.

PHYSICAL

Construction Steel cabinet
Finish

Front Panel Gray metallic with black end caps
Chassis Black matte finish

Mounting

Desktop (feet) or rack 1 RU per unit, requires optional rack mount kit
Unit Weight 3.0 kg (6.6 lb)
Shipping Weight 3.6 kg (8.0 lb)

RECOMMENDED PC REQUIREMENTS

Web Browser Microsoft® Internet Explorer® 7 or later
Media Player Adobe

®

Flash® Player 3.0

SYSTEM COMPATIBILITY REQUIREMENTS

WS5200 v2.3 or later
VCD5202 v2.3.2.0017 or later
NET5402R v2.3.2.0017 or later
CM9700 Series matrix and components (in MDD mode) v9.03.032 or later
CM9760-KBD (in V9700 mode) v8.45 or later
CM9760-ALM

CERTIFICATIONS/RATINGS/PATENTS*

• CE, Class A

• FCC, Class A

• UL/cUL Listed

•C-Tick

•CCC
*At the time of this publication, this certification is pending. Please

consult the factory, our Web site (www.pelco.com), or the most
recent B.O.S.S.

®

update for the current status of certifications.

NOTE: VALUES IN PARENTHESES ARE INCHES;

ALL OTHERS ARE CENTIMETERS.

21.60 (8.80)

REAR PANEL

Serial Port RS-232 DB-9 connector
Network Port 1 Gigabit Ethernet RJ-45
Other Ports (not used) 2 USB 2.0 ports, 1 parallel port, 1 S-Video

port, 1 VGA port, audio input/output

POWER

Power Consumption 31.2 W, 107 BTU/H
Power Input 12 VDC ±10%

ENVIRONMENTAL

Operating Temperature 10° to 35°C (50° to 95°F) at unit air intake
Storage Temperature –40° to 65°C (–40° to 149°F)
Operating Humidity 20% to 80%, noncondensing
Maximum Humidity Gradient 10% per hour
Operating Altitude –15 to 3,048 m (–50 to 10,000 ft)
Operating Vibration 0.25 G at 3 Hz to 200 Hz at a sweep rate of

9.5 octave/minute

Pelco by Schneider Electric

3500 Pelco Way, Clovis, California 93612-5699 United States

USA & Canada Tel [phone] Fax [phone]
International Tel [phone] Fax [phone]
www.pelco.com www.pelco.com/community

4.30 (1.70) 5.00 (1.80)

31.30 (12.32)

34.20 (13.46)

NOTICE: Judgment as to the suitability of the products for users’ purposes is solely
the users’ responsibility. Users should refer to the Operation manuals for cautionary
statements regarding user selected options and how they might affect video quality.
Users shall determine the suitability of the products for their own intended application,
picture rate and picture quality. In the event users intend to use the video for evidentiary
purposes in a judicial proceeding or otherwise, users should consult with their attorney
regarding any particular requirements for such use.

Pelco, the Pelco logo, and other trademar ks associated with Pelco products referred

to in this publication are trademarks of Pelco, Inc. or its affiliates. ONVIF and th e

ONVIF logo are trademarks of ONVIF Inc. All other prod uct names and

Product specifications and availability are subjec t to change without notice.

services are the property of their respective companie s.

©Copyright 2013, Pelco, Inc. All rights reserved.