Pelco UDI5000-CAM-AR, UDI5000-CAM-AU, UDI5000-CAM-CN, UDI5000-CAM-EU Specsheet

PRODUCT SPECIFICATION

video management solutions

Endura® UDI5000-CAM Universal Device Interface

FLEXIBLE INTEGRATION PLATFORM FOR ENDURA AND THIRD-PARTY CAMERAS

video management solutionsC46 21 / REVISED 5-14-14

Product Features

• UDI5000-CAM ONVIF Profile S Compliant

• Concurrently Runs Disparate Drivers in Support of MPEG4 or H.264

Compliant Third-Party IP Cameras

• Handles Command and Control Translations Between Endura

Each Third-Party IP Camera in Support of PTZ Protocols

• Accommodates Cameras Supporting RTP, RTSP, TCP, HTTP Polling,

and Several Custom Transmission Protocols

• Normalizes Camera Stream Parameters to Support Endura’s Scalable,

Real-Time Monitoring and Recording Capabilities

• Small, Independently Configured Servers Can Accommodate Up to

16 Standard Resolution Streams or Megapixel Streams (Depending
on Camera, Vendor, and Bandwidth)

®

and

• No Additional Camera Connection Licenses Required

The UDI5000-CAM universal device interface is designed to allow
third-party IP cameras to easily and transparently interface to the

®

Endura

system. With the proliferation of IP camera technology, a
great deal of variability exists between IP camera vendors in terms of
supported protocols for streaming and command and control. While
efforts are underway to create an industry standard, each vendor has
and may continue to have several disparate protocols and drivers
that their family of IP cameras support. The UDI5000-CAM provides
an efficient way to normalize disparate drivers and protocols into a
cohesive set that is compatible with Endura and the rest of Pelco’s IP
video surveillance portfolio.

Protocol Conversion and Stream Management

The UDI5000-CAM can easily accommodate camera streams that
use HTTP polling, TCP, RTP, or RTSP protocols. Regardless of the
streaming protocol the camera uses, the UDI5000-CAM converts
the transmitted stream to an RTP header that is
RFC1889/RFC3550-compliant for use by Endura.

Since Endura uses information such as the source time stamp placed
in the user data section of the transmission packet, the
UDI5000-CAM will inject this information if it is missing from the
camera. And if the camera does not support multiple outgoing
streams or multicast streaming, the UDI5000-CAM multiplexes the
single stream into streams that can be used by an unlimited number
of viewers and recorders.

The UDI5000-CAM converts command and control protocols used
by the IP cameras into the SOAP/XML protocol used by Endura for
camera control.

Convenient Scalability and Packaging

Endura’s promise of unlimited scalability is extended to the use of
third-party IP cameras through the UDI5000-CAM. Each

UDI5000-CAM can accommodate up to 16 standard resolution
cameras or up to 8 megapixel cameras from most manufacturers.
Any combination of camera type and manufacturer is also supported.
The built-in bandwidth monitor allows the administrator to maximize
the number and type of cameras that each UDI5000-CAM can
accommodate. To provide unrestricted scalability, each
UDI5000-CAM is an independent server that can run multiple
concurrent disparate drivers and normalization routines. This
capacity virtually eliminates undue load on other Endura servers and
components.

The UDI5000-CAM server is a half-width, 1 RU server. The compact
size allows for two UDI5000-CAMs to be rack mounted next to
each other in just 1 RU of space using the optional rack mount kit.

Network Administration and Upgradeability

The UDI5000-CAM supports Single Network Management Protocol
(SNMP) monitoring and traps along with Endura diagnostic
monitoring. As such, health status information is available through
the Endura workstation or an external SNMP monitoring application.

The UDI5000-CAM complies with Endura’s firmware upgrade
scheme, allowing administrators to easily push out updated drivers
and other utilities over the network as they become available from
Pelco.

OPEN ARCHITECTURE

Support for third-party cameras Is provided through UDI5000-CAM
ONVIF Profile S compliance. In addition to support for many
IP-specific device drivers, Pelco supports MPEG4, ASP, and H.264
(Basic Profile) compression formats. Pelco is a member of the ONVIF
Open Industry Forum.

International Standards

Organization Registered Firm;

ISO 9001 Quality System

C4621 / REVISED 5-14-14

TECHNICAL SPECIFICATIONS

Pelco and the Pelco logo are register ed trademarks of Pelco, Inc.

All product names and services identified throu ghout this document are trademarks or registered

trademarks of their respective companies. The absence of a trademark or registered trademark

from this document does not constitute a waiver of intellectual property rights.

Product specifications and availability subject to change without notice.

©Copyright 2014, Pelco, Inc. All rights reserved.

MODELS

Use the following table to create a model number to specify your
UDI5000-CAM. For example, the model number for a unit that includes a
European power cord is UDI5000-CAM-EU.

Model Country Code

-US = North America

-EU = Europe

UDI5000-CAM

-UK = United Kingdom

-CN = China

-AU = Australia

-AR = Argentina

SUPPLIED ACCESSORIES

Power Cord 2 power cords (based on country designation)

Note: Units shipped to China do not include
power cords

OPTIONAL ACCESSORIES

RK-UDI5000 UDI5000-CAM rack mount kit; optional 1 RU

rack mount assembly, hardware, and power
supply support bracket

SUPPORTED CAMERA MODELS

The UDI5000-CAM supports several IP device vendors. For a complete list of
supported cameras, go to www.pelco.com.

NOTE: The UDI5000-CAM does not support cameras streaming more than 30
images per second (ips).

SYSTEM

Operating System Embedded Linux

™

within the operating temperature range.

PHYSICAL

Construction Steel cabinet
Finish

Front Panel Gray metallic with black end caps
Chassis Black matte finish

Dimensions 31.3 x 21.6 x 4.3 cm

Mounting Desktop (feet) or rack (1 RU per unit, requires

Unit Weight 3.0 kg (6.6 lbs)
Shipping Weight 3.6 kg (8.0 lbs)

(12.32" D x 8.5" W x 1.70" H)

optional rack mount kit)

RECOMMENDED PC REQUIREMENTS

Web Browser Microsoft® Internet Explorer® 7 or later
Media Player Adobe

®

Flash® Player 3.0

ENDURA SYSTEM COMPATIBILITY REQUIREMENTS

WS5200 Version 2.1 or later
VCD5202 Version 2.0 or later
NET5402R Version 2.0 or later

CERTIFICATIONS

• CE, Class A

• FCC, Class A

• UL/cUL Listed

•C-Tick

•CCC

• ONVIF V1.02 Conformant

NETWORK

Interface 1 Gigabit Ethernet RJ-45 port (1000 Base-T)

FRONT PANEL INDICATORS

Buttons Power
Indicators

Power Blue if power
Network Activity Green, amber, red
Unit Status Green, amber, red

POWER

Power Consumption 31.2 W, 107 BTU/H
Power Input 12 VDC ±10%

ENVIRONMENTAL

Operating Temperature 10° to 35°C (50° to 95°F) at unit air intake
Storage Temperature –40° to 65°C (–40° to 149°F)
Operating Humidity 20% to 80%, noncondensing
Maximum Humidity Gradient 10% per hour
Operating Altitude –15 to 3,048 m (–50 to 10,000 ft)
Operating Vibration 0.25 G at 3 Hz to 200 HZ at a sweep rate of

Note: The temperature at the unit air intake can be significantly higher than
room temperature. Temperature is affected by rack configuration, floor layout,
air conditioning strategy, and other issues. To prevent performance failure
and unit damage, make sure the temperature at the unit is continuously

9.5 octave/minute

Pelco by Schneider Electric

3500 Pelco Way, Clovis, California 93612-5699 United States

USA & Canada Tel [phone] Fax [phone]
International Tel [phone] Fax [phone]
www.pelco.com www.pelco.com/community