Pelco S-SWM-GY-P Specsheet

PRODUCT SPECIFICATION

camera solutions

SWM Series Mount

WALL MOUNT, SPECTRA®, DF5, AND SARIX® ID AND IE SERIES PENDANT DOMES

Product Features

• For Use with Pelco Pendant Domes (Spectra®, DF5, and Sarix® ID and

IE Series) that Require a 1.5-inch NPT Pipe Thread for Installation

• Low Cost

• Constructed of Cast Aluminum

• Cable Feedthrough Features

• Supports up to 4.5 kg (10 lb)

• Easy to Install, Using a Mounting Plate and Standard Tools

• Mounting Hardware is Concealed Within the SWM, Providing a Very

Attractive Appearance

• Mounts Directly to a Vertical Load-Bearing Surface for Wall Mount

Applications

• Can be used with the SWM-PA Series Pole Adapter or

SWM-CA Series Corner Adapter

• For Indoor or Outdoor Applications

The SWM Series indoor/outdoor wall mounts are designed
primarily for use with Pelco pendant domes including Spectra

®

and Sarix

ID and IE Series. They can also be used with other pendant

®

, DF5,

domes that require a 1.5-inch NPT pipe thread for installation. Its
unique design conceals the mounting bolts inside the mount, provid­ing a clean and aesthetically pleasing appearance. It is easy to install
and requires no special tools. A gasket is affixed to the base to
protect the interior from moisture.

SWM-GY

WALL MOUNT

SWM-CA

CORNER ADAPTER

SWM-PA-GY

POLE ADAPTER

A feedthrough opening in the mounting surface allows for easy routing
of video and power cables. Because of its compact size, the mount is
not suitable for use with conduit fittings. A 1.5-inch NPT pipe thread
is provided in the mount to attach the pendant dome.

For Sarix installations, the SWM Series wall mounts require a Sarix
pendant mount adapter: the ID-P is required for Sarix ID Series domes,
and the IE-P is required for Sarix IE Series domes.

Accessories for the wall mount include the SWM-PA Series pole
adapter and the SWM-CA Series corner adapter. The corner
adapter allows the wall mount to be attached to the corner of a
building. The SWM-CA24 corner adapter includes a 100 VA
transformer that converts 120 or 230 VAC input to 24 VAC output.
When installed with Sarix IE Series domes, the power from the
SWM-CA24 mount is used for the dome heater.

The wall mount and adapters are constructed of aluminum with a
polyester powder coat finish. The wall mount is available in gray, light
gray, black, or white. The pole adapter is available in gray, black, or
white. The corner adapter is available in gray or white.

SWM-GY WALL MOUNT AND SWM-CA CORNER ADAPTER

SHOWN WITH DF5-PG-EO

International Standards

Organization Registered Firm;

ISO 9001 Quality System

C293 / REVISED 9-4-13

TECHNICAL SPECIFICATIONS

MODELS

SWM-GY Wall mount with cable feedthrough; gray

SWM-BK Same as SWM-GY except black finish
SWM-SR Same as SWM-GY except light gray finish
SWM-WT Same as SWM-GY except white finish*
*SWM mounts require the ID-P adapter for Sarix

adapter is required for use with Sarix IE Series domes.

finish

®

ID Series domes; the IE-P

ELECTRICAL (SWM-CA24 ONLY)

Input Power 120/230 VAC, 50/60 Hz switchable
Output Power 24 VAC (100 VA transformer)
Circuit Protection One 1.6 A, 120 VAC fast-acting fuse or one

500 mA, 230 VAC slow-blow fuse

GENERAL

Mounting Method

Wall Mount Mount is secured by a set screw to a

Corner Adapter Adapter is attached to a vertical load-bearing

Pole Adapter Adapter is attached to a pole with two

Cable Entry Cable feedthrough holes in mount adapters
Maximum Load 4.5 kg (10 lb)
Environment Indoor/outdoor
Operating Temperature

SWM-CA24 only –46° to 49°C (–50° to 120°F)

Effective Projected Area (EPA)

SWM-GY, SWM-BK,
SWM-SR, SWM-WT ~12 square inches

Construction

Wall Mount Cast aluminum
Adapters Aluminum

Finish

SWM-GY, SWM-CA,
SWM-CA24,
SWM-PA-GY Gray polyester powder coat

SWM-BK,
SWM-PA-BK Black polyester powder coat

SWM-SR Light gray polyester powder coat
SWM-WT, SWM-PAWT,

SWM-CAWT White polyester powder coat

Weight Unit Shipping

SWM-GY, SWM-BK,
SWM-SR, SWM-WT 0.50 kg (1.10 lb) 0.91 kg (2.00 lb)

SWM-CA, SWM-CAWT 1.79 kg (3.95 lb) 2.27 kg (5.00 lb)
SWM-CA24 3.32 kg (7.32 lb) 4.08 kg (9.00 lb)
SWM-PA-GY, SWM-PA-BK,

SWM-PAWT 0.32 kg (0.70 lb) 0.91 kg (2.00 lb)

mounting plate that is attached to the
mounting surface with two fasteners (not
supplied) up to 0.25-inch (M6) diameter.

surface with two 0.375-inch (M8) diameter
stainless steel bolts of appropriate length
(not supplied). Includes hardware to attach
SWM mount.

stainless steel straps (supplied). Straps fit

10.16 to 20.32 cm (4 to 8-inch) diameter pole.
Includes hardware to attach SWM mount.

RELATED PRODUCTS

SWM-CA Corner adapter; gray finish
SWM-CAWT Same as SWM-CA except white finish
SWM-CA24 Same as SWM-CA except includes internal

SWM-PA-GY Pole adapter with stainless steel hardware;

SWM-PA-BK Same as SWM-PA-GY except black finish
SWM-PAWT Same as SWM-PA-GY except white finish

VALUES IN PARENTHESES ARE INCHES; ALL OTHERS ARE CENTIMETERS.

6.45

(2.54)

12.70
(5.00)

transformer to convert 120 or 230 VAC input
to 24 VAC

gray finish

10.54
(4.15)

15.88

(6.25)

SWM-GY, SWM-BK, SWM-SR, SWM-WT

3.81

(1.50)

9.53

(3.75)

SWM-PA POLE ADAPTER

38.71 (15.24)

1.58 (0.62), 2X

7.87

(3.10)

4.44

(1.75)

8.10

(3.19)

11.68
(4.60)

7.62

(3.00)

Pelco by Schneider Electric

3500 Pelco Way, Clovis, California 93612-5699 United States

USA & Canada Tel [phone] Fax [phone]
International Tel [phone] Fax [phone]
www.pelco.com www.pelco.com/community

14.30
(5.63)

SWM-CA CORNER ADAPTER

Pelco, the Pelco logo, and other tra demarks associated with Pelco products referred

to in this publication are trademarks of Pe lco, Inc. or its affiliates. ONVIF and the

ONVIF logo are trademarks of ONVIF Inc. All other product names and

Product specifications and availability are subject to change without notice.

14.28
(5.62)

services are the property of their resp ective companies.

©Copyright 2013, Pelco, Inc. All rights reserved.

10.13
(3.99)