Pelco SP-S6220-PGL1-P, S-S6230-EGL1-P, S-S6220-EGL0-P, S-S6220-EGL1-P, S-S6220-PGL1-P Specsheet
...
PRODUCT SPECIFICATION
camera solutions
Spectra® Enhanced Series IP PTZ Domes
HIGH-SPEED PTZ, 20X & 30X MODELS, FULL HD, WDR, LOW-LIGHT PERFORMANCE
Product Features
• SureVision 3.0 Technology, Including:
– 130 dB Wide Dynamic Range (WDR)
– Advanced Low Light Down to 0.03 LUX on Select Models
– Anti-Bloom Technology
– 3D Noise Filtering
– Enhanced Tone Mapping
• Up to Full HD 1080p and up to 60 Images per Second (ips)
• Power over Ethernet (HPoE and PoE+), 24 VAC, 24 VDC
• Pelco H.264 Smart Compression Technology
• Three Automatic Defog Options
• Electronic Image Stabilization (EIS)
• Built-in Analytics Suite
• Vandal Resistant IK10 Smoked or Clear Bubble
• SDXC Memory Card with up to 2TB
• Compatible with Pelco and Third-Party Video Systems
• ONVIF Profile S, Profile G, and Profile Q Conformant
• 3-Year Warranty and Support
Top of the Line IP Performance
Pelco’s Spectra® Series of high speed PTZ domes provide top tier
image quality and performance. They include valuable embedded
features that enhance the value of the product. Low latency video
and control make the camera incredibly easy to use.
Full High Definition SureVision 3.0 Cameras
Spectra Enhanced has long provided Full HD 1080p 20x and 30x
optical zoom cameras that run at up to 60 frames per second and
provide 130dB of True Wide Dynamic Range (WDR). With Pelco’s
latest product evolution a powerful new camera option is now
available that features the same powerful WDR capabilities as
before but now with the addition of Pelco’s latest SureVision 3.0 low
light performance. In addition to 130dB of True WDR SureVision 3.0
adds a new level of low light performance that is up to twenty times
better than base Spectra Enhanced models. The new SureVision 3.0
camera is available in both the 20x and 30x optical zoom in select
models.
Embedded Features
Included in all models are a full suite of built in video analytics
including: Abandoned Object, Adaptive Motion Detection,
AutoTracker, Camera Sabotage, Directional Motion, Loitering
Detection, Object Counting, Object Removal, and Stopped Vehicle.
Spectra Enhanced also allows for up to 32 window blanking privacy
zones that are configurable with custom blurring options. Three
levels of Image Defog provide options for enhancing the image on
foggy or rainy days. Five White Balance modes are available for
overcoming difficult lighting conditions day and night. A Vivid
Imaging mode can be enabled to automatically increases color
saturation and sharpening. Spectra Enhanced supports up to 2TB of
onboard local storage (not supplied) that is easily accessible through
the ONVIF Profile G protocol or FTP.
Intuitive Design
Spectra Enhanced features the same ease of installation and
maintenance that you have come to expect from Spectra. Each dome
system consists of a back-box, a dome drive, and an IK10 rated lower
dome. There is a choice of five form factors: in-ceiling, environmental
in-ceiling, pendant, environmental pendant, and stainless steel
environmental pendant.
VMS Integration
Spectra Enhanced easily connects to Pelco IP and hybrid video
systems such as VideoXpert, Endura 2.0 (or later), and Digital Sentry
7.3 (or later). The camera is also compatible with Digital Sentry NVS
(DS NVS), a full-featured video management software, which is
available as a free download at www.pelco.com. DS NVS includes
four free Pelco IP licenses and allows for the management of video
from up to 64 cameras.
Pelco endeavors to be the most open and integrated camera provider
in the industry and as a part of that effort Spectra Enhanced is
integrated with a long and ever-growing list of 3rd party software
and Video Management Systems (VMS).
International Standards
Organization Registered Firm;
ISO 9001 Quality System
C3946 / REVISED 11-13-17
BACK BOX FEATURES
13.2
(5.2)
19.0 (7.5)
20.8 (8.2)
15.0 (5.9)
9.2
(3.6)
21.8 (8.6)
15.0 (5.9)
28.2
(11.1)
15.0 (5.9)
28.2
(11.1)
23.8 (9.4)
NOTE: VALUES IN PARENTHESES ARE INCHES; ALL OTHERS ARE CENTIMETERS.
In-Ceiling (Indoor)
• Single Back Box for Suspended or Hard Ceiling Applications with Light Gray
Trim Ring, RAL9002
• Requires 13.35 cm (5.25 in.) Space Above Ceiling and 8.25 cm (3.25 in.) Below
• Minimum Ceiling Thickness 1.27 cm (0.50 in.); Maximum 4.45 cm (1.75 in.)
• Aluminum Construction, IK10 Rated Nylon Bubble
• Suitable for Use in Environmental Air Handling Spaces
• 0° to 60°C (–32° to 140°F) Sustained Operating Temperature
11.2
(4.4)
11.2
(4.4)
25.2 (9.9)
15.0 (5.9)
21.8 (8.6)
Environmental In-Ceiling
• Single Back Box, RAL9011, for Hard Ceiling Applications
• Requires 11.18 cm (4.40 in.) Space Above Ceiling;10.92 cm (4.30 in.) Below
• Type 4X and IP66
• Includes Heater and Blower
• Minimum Ceiling Thickness 1.27 cm (0.50 in.); Maximum 4.45 cm (1.75 in.)
• Aluminum Construction, IK10 Rated Nylon Bubble
• –45° to 60°C (–50° to 140°F) Sustained Operating Temperature
Standard Pendant
• Standard Pendant Available in Black or Light Gray Finish, RAL9002
• Aluminum Construction, IK10 Rated Nylon Bubble
• Uses 1 1/2-inch NPT Thread
• –5° to 60°C (–23° to 140°F) Sustained Operating Temperature
Environmental Pendant
• Environmental Pendant Available in Light Gray Finish, RAL9002
• Aluminum Construction, IK10 Rated Nylon Bubble
• Type 4X and IP66
• Uses 1 1/2-inch NPT Thread
• Includes Sun Shield, Heater, and Blower
• –45° to 60°C (–50° to 140°F) Sustained Operating Temperature
28.2
(11.1)
15.0 (5.9)
23.6 (9.3)
Stainless Steel Environmental Pendant
• Stainless Steel Environmental Pendant Available in Light Gray Finish, RAL9002
• All Stainless Steel Construction, IK10 Rated Nylon Bubble
• Type 4X and IP66
• Uses 1 1/2-inch NPT Thread
• Includes Sun Shield, Heater, and Blower
• –45° to 60°C (–50° to 140°F) Sustained Operating Temperature
TECHNICAL SPECIFICATIONS
CAMERA/OPTICS
Specification 20X Low Light 30X Low Light
Sensor Type 1/2.8-inch Type Exmor CMOS Sensor 1/2.8-inch Type Exmor CMOS Sensor
Optical Zoom 20X 30X
Digital Zoom 12X 12X
Maximum Resolution 1920 x 1080 1920 x 1080
Lens f/1.6 ~ f/3.5, focal length 4.7 mm (wide) ~ 94.0 mm (tele) f/1.6 ~ f/4.7, focal length 4.3 mm (wide) ~ 129.0 mm (tele)
Horizontal Angle of View 59.5° wide - 3.3° tele 63.7° wide - 2.3° tele
Aspect Ratio 16:9 16:9
Color (33 ms) 0.03 lux 0.03 lux
Light Sensitivity
Day/Night Capabilities Yes Yes
Shutter Range 1/1 ~ 1/10,000 sec 1/1 ~ 1/10,000 sec
Signal-to-Noise Ratio >50dB >50dB
IR Cut Filter Yes Yes
Wide Dynamic Range 130 dB 130 dB
Iris Control Auto iris with manual override Auto iris with manual override
Backlight Compensation Yes Yes
Automatic Gain Control Yes Yes
Active Noise Filtering 3D Noise Filtering 3D Noise Filtering
Electronic Image Stabilization
(EIS)
Color (250 ms) 0.008 lux 0.008 lux
Mono (33 ms) 0.004 lux 0.004 lux
Mono (250 ms) 0.001 lux 0.001 lux
Note: Sensitivity in lux for 90% reflectance, f/1.6 (wide angle), 50 dB gain at 30 IRE (30% of signal level) with Sensitivity Boost
OFF; 4X improvement to sensitivity with Sensitivity Boost ON
No Yes
SOFTWARE FEATURES
• 256 presets
• 16 tours
• ±0.1° preset accuracy
• 8 configurable scans
• Patterns–8 recordable patterns (up to 5 minutes each)
• Multilingual menus (English, Spanish, Portuguese, Italian, German,
French, Russian, Turkish, Arabic, Simplified Chinese, and Korean)
• Password protection
• 32 window blanks, configurable in size, with 5 window blur options
• “Auto Flip” feature rotates dome 180° at bottom of tilt travel
• Configurable park with actions
• Proportional pan/tilt continually decreases pan/tilt speeds in proportion
to depth of zoom
• Pelco analytics including nine user-configurable behaviors
• Image Defog modes
PELCO ANALYTICS BEHAVIORS
Spectra Enhanced includes nine user-configurable behaviors. The
camera is capable of running up to three behaviors simultaneously;
although, the number of behaviors is limited to the available
processing power of the camera and the type of analytic being used.
• Abandoned Object: Detects objects placed within a defined zone and
triggers an alarm if the object remains in the zone longer than the
user-defined time allows. An airport terminal is a typical installation for
this behavior. This behavior can also detect objects left behind at an
ATM, signaling possible card skimming.
• Adaptive Motion Detection: Detects and tracks objects that enter a
scene and then triggers an alarm when the objects enter a user-defined
zone. This behavior is primarily used in outdoor environments with light
traffic to reduce the number of false alarms caused by environmental
changes.
• AutoTracker: Detects and tracks movement in the field of view. When
the AutoTracker behavior is configured, the system automatically pans
and tilts to follow the moving object until the object stops or disappears
from the monitored area.
• Camera Sabotage: Detects contrast changes in the field of view. An
alarm is triggered if the lens is obstructed by spray paint, a cloth, or a
lens cap. Any unauthorized repositioning of the camera also triggers an
alarm.
• Directional Motion: Generates an alarm in a high traffic area when a
person or object moves in a specified direction. Typical installations for
this behavior include an airport gate or tunnel where cameras can detect
objects moving in the opposite direction of the normal flow of traffic or an
individual entering through an exit door.
• Loitering Detection: Identifies when people or vehicles remain in a
defined zone longer than the user-defined time allows. This behavior is
effective in real-time notification of suspicious behavior around ATMs,
stairwells, and school grounds.
• Object Counting: Counts the number of objects that enter a defined
zone. This behavior can be used to count the number of people at a store
entrance/exit or inside a store where the traffic is light. This behavior is
based on tracking and does not count people in a crowded setting.
• Object Removal: Triggers an alarm if an object is removed from a
user-defined zone. This behavior is ideal for customers who want to
detect the removal of high value objects, such as painting from a wall or a
statue from a pedestal.
• Stopped Vehicle: Detects vehicles stopped near a sensitive area longer
than the user-defined time allows. This behavior is idea for airport
curbside drop-offs, parking enforcement, suspicious parking, traffic lane
breakdowns, and vehicles waiting at gates.
TECHNICAL SPECIFICATIONS
*
Supports mixed IPv4 and IPv6 installations, but not IPv6-only deployments.
†
Pelco Media Player is recommended for control, smoothness, and reduced
latency as compared to QuickTime.
VIDEO
Video Encoding H.264 High, Main, or Base profiles and
Video Streams Up to 2 simultaneous streams; the second
Frame Rate Up to 60, 50, 30, 25, 20, 15, 12.5, 10, 8.333,
Available Resolutions
Resolution
MPx Width Height
2.07 1920 1080 16:9 60 8.00
2.07 1920 1080 16:9 30 6.05
0.92 1280 720 16:9 30 3.00
0.36 800 448 16:9 30 2.00
0.23 640 352 16:9 30 1.80
1.23 1280 960 4:3 30 3.80
0.49 800 608 4:3 30 2.00
0.31 640 480 4:3 30 1.45
0.08 320 240 4:3 30 0.50
MJPEG
stream is variable based on the setup of the
primary stream
7.5, 6, 5, 3, 2.5, 2, 1 (depending on the coding,
resolution, and stream configuration)
H.264 High Profile
(IP GOP structure)
Aspect
Ratio
Maximum
IPS
Recommended
Bit Rate (Mbps)
NETWORK
Supported Protocols TCP/IP, UDP/IP (Unicast, Multicast IGMP),
Users
Unicast Up to 20 simultaneous users depending on
Multicast Unlimited users H.264
Security Access Password protected
Software Interface Web browser view and setup
Pelco System Integration Endura 2.0 (or later)
Open API Pelco API or ONVIF Profile S, G, and Q
Mobile Application Integrated to Pelco Mobile App
Video Motion Detection Simple motion detection and camera
Local Storage SDXC, addressable to 2TB
UPnP, DNS, DHCP, RTP, RTSP, NTP, IPv4, IPv6*,
SNMP v2c/v3, QoS, HTTP, HTTPS, SSH, SSL,
SMTP, FTP, 802.1x (EAP), and NTCIP 1205
resolution settings (2 guaranteed streams)
Digital Sentry 7.3 (or later)
sabotage
Capture 1–5–10 second video clips on camera
sabotage, motion detection, or alarm input;
record video continuously in the case of
network outage with option to overwrite;
access video through FTP protocol and ONVIF
Profile G
MINIMUM SYSTEM REQUIREMENTS
Processor Intel® Core™ i3 Processor, 2.4 GHz
Operating System Windows
Memory 4 GB RAM
Network Interface Card 100 megabits (or greater)
Monitor Minimum of 1024 x 768 resolution, 16- or
®
7 (32-bit and 64-bit) with
®
DirectX
11, Windows XP Service Pack 3 with
DirectX 9.0c, or Mac
32-bit pixel color resolution
®
OS X 10.4 (or later)
Web Browser Internet Explorer® 8.0(or later) or Firefox 3.5
(or later); Internet Explorer 8.0 (or later) is
recommended for configuring analytics
ANALYTICS
Required Systems for Pelco Analytics
Pelco Interface WS5200 Advanced System Management
Software on an Endura 2.0 (or later) system
Open API The Pelco API can transmit behavior alarm
data to third-party applications, available at
pdn.pelco.com
GENERAL
Construction
Back Box Aluminum
Dome Drive Aluminum, thermo plastic
Lower Dome Nylon
Stainless Steel Construction
Back Box 316 stainless steel; gray, polyurethane
powder coated finish
Lower Dome 316 stainless steel; black, polyurethane
powder coated finish
Bubble Nylon, clear or smoked
Light Attenuation
Smoked f/0.5 light loss
Clear f/0.0 light loss
Cable Entry (back box)
In-Ceiling 0.75-inch conduit fitting
Pendant Through 1.5-inch NPT pendant mount
Weight (approximate) Unit Shipping
In-Ceiling 2.6 kg (5.7 lb) 4.6 kg (10.2 lb)
Environmental In-Ceiling 2.9 kg (6.5 lb) 4.9 kg (10.8 lb)
Standard Pendant 3.1 kg (6.8 lb) 5.0 kg (11 lb)
Environmental Pendant 3.7 kg (8.2 lb) 5.5 kg (12.2 lb)
Stainless Steel 6.5 kg (14.3 lb) 8.6 kg (19 lb)
Environmental Pendant
Effective Projected Area (EPA) 20.5 square inches (without mount),
47 square inches (with IWM Series mount)
ALARM
Unsupervised Detects open or closed alarm state
Supervised Detects open and short alarm state with
external 1-kohm resistor
Input 3.5 VDC maximum, 3.5 mA maximum
Relay Output ±32 VDC maximum, 150 mA maximum
AUDIO
Input/Output Line level/external microphone input;
600-ohm differential, 1Vp-p maximum signal
level
Streaming Embedded audio
TECHNICAL SPECIFICATIONS
OPERATING TEMPERATURE
1
Models
Environmental Pendant and In-Ceiling
Temperature
2
Maximum
2
Minimum
In-Ceiling
(24 VAC, PoE+)
60°C (140°F) 60°C (140°F) 60°C (140°F) 60°C (140°F) 60°C (140°F)
0°C (32°F) –5°C (23°F) –51°C (–60°F) –45°C (–49°F) –20°C (–4°F)
Ice Free N/A N/A –30°C (–22°F) –30°C (–22°F) –10°C (14°F)
Cold Start
De-Icing
3
4
0°C (32°F) 0°C (32°F) –40°C (–40°F) –35°C (–31°F) –10°C (14°F)
N/A N/A –30°C (–22°F) –30°C (–22°F) N/A
Storage Temperature –20°C to 60°C (–5°F to 140°F)
1
Assumes no wind chill factor.
2
For outdoor applications.
3
Cold starts within 90 minutes at specified temperature.
4
Removes icing of 2.5 mm (0.1 in.) within 3 hours after power-up.
5
PEO75U HPoE injector accessory required for heater operation.
OPERATING HUMIDITY
In-Ceiling (indoor),
Standard Pendant 10 to 90% RH (noncondensing)
Environmental In-Ceiling,
Environmental Pendant,
Stainless Steel
Environmental Pendant 10 to 100% RH (condensing)
MECHANICAL
(Dome Drive Only)
Variable Speed 0.1° to 80°/sec (manual pan speed)
Preset Accuracy ±0.1°
Pan Movement 360° continuous pan rotation
Vertical Tilt +1° to –90°
Maximum Pan Speed Up to 450° per second
Maximum Tilt Speed Up to 450° per second
Manual Pan/Tilt Speeds
Pan 0.1° to 80°/sec manual operation
Tilt 0.1° to 45°/sec manual operation
Preset Speeds
Pan 450°/sec
Tilt 450°/sec
PELCO’S H.264 SMART COMPRESSION TECHNOLOGY
Pelco’s H.264 Smart Compression Technology lowers bandwidth and storage
requirements by up to 70%, while reducing storage requirements.
Pelco’s Smart Compression Technology dynamically analyzes motion
occurring within live video in real-time, to intelligently compress the
information you don’t need, while retaining details with clear quality in the
areas that are important in the scene. By enabling Dynamic GOP, an added
feature of Smart Compression, the number of I-frames are automatically
reduced in scenes with low motion. Based on the complexity of scenes and
motion occurring, such as a store room that has limited entry and exit, up to
70% bandwidth savings can be achieved.
Standard Pendant
(24 VAC, PoE+)
24 VAC HPoE
5
PoE+
ELECTRICAL
Ports RJ-45 connector for 100Base-TX
Cabling Type Cat5e or better for 100Base-TX
Input Voltage 18 to 32 VAC; 24 VAC nominal
Input Power
24 VAC 1 A (24 VA) maximum (without heater and
24 VDC 1 A (24 W) maximum (without heater and
PoE+ 18 W, Environmental models (with heater off,
HPoE 60 W, Environmental models (with heater and
*
Heater is disabled with PoE+ power selection.
†
Only 27 W of power is supplied to the heater.
Auto MDI/MDI-X
Autonegotiate/manual setting
22 to 27 VDC; 24 VDC nominal
blower);
3 A (72 VA) maximum (with heater and
blower)
blower);
3 A (72 W) maximum (with heater and blower)
blower on);*
15 W, Non-Environmental (with heater and
blower off)
blower on);
†
15 W, Non-environmental (with heater and
blower off)
CERTIFICATIONS/RATINGS/PATENTS
• CE, Class A
• FCC, Class A
• ICES-003, Class A
• UL /cUL Listed
•C-Tick
• NEMA TS-2 (Temp.) para 2.2.7.3 - 2.2.7.7
•KC
• ONVIF Profile S
• ONVIF Profile G
• ONVIF Profile Q
®
•Cisco
Medianet Media Services Proxy 2.0 compatible
• Environmental models, including stainless steel, were tested in
accordance with:
– IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-14, IEC 60068-2-30, and IEC
60068-2-78
• Environmental pendants, including stainless steel, were tested in
accordance with:
– IEC 60068-2-6 and IEC 60068-2-27
• Environmental models meet NEMA Type 4X and IP66 standards when
installed properly (B6-F-E, B6-PG-E, and B6-PSG-E)
• U.S. Patents 5,931,432; 6,793,415 B2; 6,802,656 B2; 6,821,222 B2;
7,161,615 B2
• IK10 impact-resistant bubble on all models were tested in accordance
with:
– IEC 62262
TECHNICAL SPECIFICATIONS
Pelco, the Pelco logo, and other trad emarks associated with Pelco products referred
to in this publication are trademarks of Pelco, Inc. or its affiliates. ONVIF and the
ONVIF logo are trademarks of ONVIF Inc. All othe r product names and
services are the property of their respective comp anies.
Product specifications and availability are subject to change without no tice.
©Copyright 2017, Pelco, Inc. All rights reserved.
SYSTEM MODEL NUMBERS
Spectra Enhanced
Type Back Box Color Lower Dome
Low Light,
2.0 MPx, 20X
In-ceiling, indoor White with white trim ring
In-ceiling, environmental Black with black trim ring
Gray
Pendant, standard
Black
Pendant, environmental Gray
Pendant, environmental, stainless steel Gray
Smoked S6220-FWL0 S6230-FWL0
Clear S6220-FWL1 S6230-FWL1
Smoked S6220-YBL0 S6230-YBL0
Clear S6220-YBL1 S6230-YBL1
Smoked S6220-PGL0 S6230-PGL0
Clear S6220-PGL1 S6230-PGL1
Smoked S6220-PBL0 S6230-PBL0
Clear S6220-PBL1 S6230-PBL1
Smoked S6220-EGL0 S6230-EGL0
Clear S6220-EGL1 S6230-EGL1
Smoked S6220-ESGL0 S6230-ESGL0
Clear S6220-ESGL1 S6230-ESGL1
COMPONENT MODEL NUMBERS
Back Box High Definition (HD) Lower Dome* Dome Drive
B6-F In-ceiling LD6F-0 IK10, In-ceiling, smoked D6220L 20X
B6-F-E In-ceiling, environmental LD6F-1 IK10, In-ceiling, clear D6230L 30X
B6-PG Pendant, gray LD6PB-0 IK10, Pendant, smoked
B6-PB Pendant, black LD6PB-1 IK10, Pendant, clear
B6-PG-E Pendant, gray, environmental LD6SS-0 IK10, Pendant, smoked, stainless steel
B6-PSG-E Pendant, gray, environmental, stainless steel LD6SS-1 IK10, Pendant, clear, stainless steel
*Use the pendant lower domes with the environmental in-ceiling and environmental pendant back boxes.
Spectra Enhanced
Low Light,
2.0 MPx, 30X
RECOMMENDED MOUNTS
Pendant Domes
IWM-GY Wall mount, gray finish; can be adapted for
corner, parapet, or pole application
IWM24-GY Series Wall mount, with integral 24 VAC, 100 VA
transformer; gray finish; can be adapted for
corner, parapet or pole application
PP350/PP351 Parapet wall/roof mount
SWM Series Compact wall mount, black or gray finish; can
be adapted for corner or pole applications
WIND SPECIFICATIONS
Full Motion Control 0 to 130 knots (150 mph/241 kmh)
Pelco by Schneider Electric
3500 Pelco Way, Clovis, California 93612-5699 United States
USA & Canada Tel (800) 289-9100 Fax (800) 289-9150
International Tel +1 (559) 292-1981 Fax +1 (559) 348-1120
www.pelco.com www.pelco.com/community
OPTIONAL ACCESSORIES
POE1AT-US PoE+ Injector† with US power cord
POE1AT-EU PoE+ Injector
POE75U-1UP HPoE Injector
POE75U-1UP-US HPoE Injector
POE75U-1UP-EUK HPoE Injector
MCS Series Indoor, 24 VAC power supply
WCS Series Outdoor, 24 VAC power supply
Refer to individual power supply specifications for more information.
†
PoE+ will not provide enough power for heater operation. Use the
HPoE Injector to provide sufficient heater power.
†
with EU power cord
†
(no power cord)
†
with US power cord
†
with EU/UK power cord
Loading...