PRODUCT SPECIFICATION
camera solutions
Sarix® TM Series Thermography IP Cameras
IP THERMAL CAMERA WITH FIXED ENCLOSURE OR INTEGRATED PAN/TILT SYSTEM
Product Features
• Fixed or Pan/Tilt (PT) Options
• Built-in Thermography Analytics and Alarms
• Temperature Monitoring Event and Metadata Streaming
• Minimum/Maximum/Average Temperature Algorithms
• Auto Environmental Compensation and Correction
• Up to 16 User-Defined Alarm Zones for Each Profile
• Integration with Major Video Management Systems
• Uncooled, Sun-Safe, Amorphous Silicon Microbolometer
• Long Wave Infrared (LWIR)
• 384 x 288 Resolution
• 25 µm Pixel Size
• Multiple Lens Options
• Complete with Sun Shroud and Heater/Defroster
• Meets NEMA Type 4X and IP66 Standards
The Sarix® TM Series thermography IP camera is an advanced
thermal imaging camera designed for easy integration into any new or
existing video security application. The camera provides predictive
maintenance and process monitoring capabilities by detecting
temperature fluctuations in user-defined areas. Every Sarix TM
Series camera features IP outputs and an integrated, environmentally
protected IP66-rated enclosure (with optional pan/tilt positioner).
Additionally, when used in an IP system, the Sarix TM Series
thermography camera features a full suite of thermographic analytics.
At the core of the Sarix TM Series thermography IP camera is an
uncooled, sun-safe microbolometer, long-wavelength infrared (LWIR)
camera that delivers 384 x 288 resolution thermal video. The camera
features an amorphous silicon detector, which has lower fixed
pattern noise and a more uniform response than vanadium oxide
detectors, while still maintaining high resolution and sensitivity.
Because the amorphous silicon detector is sun-safe, the camera can
be exposed directly to the sun without degrading performance or
long-term reliability.
The Sarix TM Series provides outstanding sensitivity below 50 mK
at f/1.0. It is capable of multiple display formats, including white hot,
black hot, and color signatures.
The Sarix TM Series is available in fixed or PT options. The fixed
camera has an input voltage of 24 VAC or 24 VDC. The PT camera has
an input voltage of 24 VAC or a selectable power source of
120/230 VAC.
The Sarix TM Series can support two simultaneous video and
temperature event streams. The two streams can be compressed in
MJPEG and H.264 formats across several resolution configurations.
The streams can be configured to a variety of frame rates, bit rates,
and group of pictures (GOP) structures for additional bandwidth
administration.
The powder-coated aluminum enclosure makes the Sarix TM
Series ideal for either indoor or outdoor applications. The system has
a sustained operating temperature range of –40° to 50°C
(–40° to 122°F). A built-in heater/defroster and sun shroud are
standard features on the Sarix TM Series.
International Standards
Organization Registered Firm;
ISO 9001 Quality System
C1317SP / REVISED 5-12-15
TECHNICAL SPECIFICATIONS
RelZone G1: Zone 1: Max: 50.1
RelZone G1: Zone 2: Max: 49.8
RelZone G1: Zone 3: Max: 50.2
RelZone G1: Zone 4: Max: 49.6
SelfRefZone 1: Max: 48.3
AbsZone1: Max: 50.3
RelZone G1: Zone2
RelZone G1: Zone 3
RelZone G1: Zone4
SelfRefZone 1
AbsZone1
PELCO ANALYTICS
Pelco Analytics enhance the flexibility and performance of the
Sarix TM Series. Pelco Analytics are easily configured and enabled
for alarm notification using a standard Web browser, and Pelco
behavior alarms are compatible with Pelco or third-party systems
that support Pelco’s Analytics API system.
The Sarix TM Series thermography IP camera includes three userconfigurable thermographic behaviors and camera sabotage
detection. The camera is capable of running all four behaviors
simultaneously.
Note: For each behavior, you can create several custom profiles that
contain different camera settings. With these profiles, you can set up
different temperature scenarios for the behavior, which will
automatically trigger alarms when the specified thermography
activity is detected.
For thermography behaviors, up to 16 user-defined alarm areas are
available. Each alarm area overlay contains text information about
temperature in both live view and playback.
Each Sarix TM Series thermography IP camera includes the
following behaviors:
• Camera Sabotage: Detects contrast changes in the field of view. An
alarm is triggered if the lens is obstructed with spray paint, a cloth, or
covered with a lens cap. Any unauthorized repositioning of the camera
also triggers an alarm.
• Thermography - Absolute Threshold: Detects temperature changes to
objects or areas within a defined zone. Exceeding the threshold
temperature triggers an alarm.
• Thermography - Relative Threshold: Detects temperature differences
between objects in a group. Exceeding the allowable temperature range
threshold between two or more objects triggers an alarm.
• Thermography - Self Reference Threshold: Detects temperature
changes from an initial temperature defined in the zone when the box is
drawn. Exceeding the temperature range threshold for temperature
change from the initial temperature triggers an alarm.
Weather Station Controller
Global settings for thermography behaviors can be configured
manually or with the optional Xytronix
©
X-320M
™
weather station
controller. The camera queries the X-320M for updated weather
conditions and gives a level of accuracy that is unavailable with
manual updates. The camera uses weather condition reports from
the controller to adjust automatically to changes in weather, such as
light snow and fog, that affect ambient temperature and humidity.
The camera also uses the controller’s rain sensor capabilities to
modify alarm behavior if rain is detected.
POSITIONING SYSTEM
The Sarix TM Series positioning system is a completely integrated
system offering responsive, high-speed positioning capabilities,
outstanding weather protection, IP-based controls, and easy
installation. Designed for minimal maintenance with no gears to
adjust, the positioning system is available in pedestal and wall
mount models and offers variable pan and tilt speeds and preset
position precision even in high winds.
Each Sarix TM Series positioning system includes the following
features:
•Esprit® Pan/Tilt
• Operational in 145 km/h (90 mph) Winds, Can Withstand Wind Velocities
Up to 209 km/h (130 mph)
• Preset Positioning, Patterns, and Multiple Scan Modes
• Preset Position Accuracy to 1°
• Pan Preset Speed of 100°/Sec in 80 km/h (50 mph) Winds and 50°/Sec in
145 km/h (90 mph) Winds
• Tilt Preset Speed of 30°/Sec
• Manual Pan Speed, 0.1° to 40°/Sec
• Manual Tilt Speed, 0.1° to 20°/Sec
• Variable Speed Pan, 0.1° to 100°/Sec with Proportional Pan
• Variable Scan Speeds (1 to 40°/Sec)
• 360° Continuous Pan Rotation
• Tilt Range of +33° to –83° from Horizontal
WEB INTERFACE
The Sarix TM Series uses a standard Web browser for powerful
setup and administration.
TECHNICAL SPECIFICATIONS
THERMOGRAPHY CAMERA/OPTICS
Detector Uncooled, sun-safe, amorphous silicon
Array Format 384 x 288
Target Range Distance 2 to 140 m
Atmospheric Correction Up to 4267 m (14,000 ft) altitude
Spatial Resolution (IFOV) 1.75 to 0.5 mRad
Temperature Measurement
Range –20° to 120°C
Reading Accuracy*
Sensitivity 0.05°C
Pixel Size 25 µm
Shuttering 1 min. periodic recalibration
Effective Resolution 384 x 288 (110,592 pixels)
Spectral Response 8 to 12 µm, LWIR
Normalization Source Internal shutter (offset only), 0.3 second video
Temporal NETD 50 mK at f/1.0
Front Window Germanium with Diamond-Like Coating (DLC)
Display Formats White hot, black hot, and rainbow
*Specifications for reading accuracy are based on stable rather than extreme
weather conditions.
microbolometer
±2°C or ±2% of reading (whichever is
larger)
freeze during shutter
with resistance to abrasion, salts, acids,
alkalis, and oil
LENS AND RANGE PERFORMANCE†
384 x 288
Lens (mm) F-Number (f)
Field of View
(H x V x D)
Measurement
Range (m)
14.25 1.2 39° x 29° x 48° 2–40
35 1.4 16° x 12° x 19° 40–90
50 1.2 11° x 8° x 14° 90–140
†
Based on 0.25m x 0.25m feature size representing 4 x 4 pixel zone
INTEGRATION
Pelco System Integration Endura® 2.0 (or later)
Open API Pelco API
MINIMUM SYSTEM REQUIREMENTS
Network Interface Card 100 megabits (or greater)
Monitor Minimum of 1024 x 768 resolution,
Web Browser Internet Explorer
Media Player Pelco Media Player or QuickTime
Notes:
• Pelco Media Player is recommended for control, smoothness, and
reduced latency as compared to QuickTime.
• This product is not compatible with QuickTime version 7.6.4 for Windows
XP or Windows Vista. If you have this version installed on your PC, you
will need to upgrade to QuickTime version 7.6.5.
• Network and processor bandwidth limitations might cause the video
stream to pause or appear pixelated when additional Web-interface
users connect to the camera. Decrease the images per second (ips),
resolution, compression, or bit rate settings of the Web interface video
streams to compensate for network or processor limitations.
16- or 32-bit pixel color resolution
®
Firefox
®
8.0 (or later) or Mozilla®
3.5 (or later); Internet Explorer 8.0 (or
later) is recommended for configuring
analytics
®
7.6.5 for
Windows 7, XP, or Vista; or QuickTime 7.6.4
for Mac OS X 10.4 (or later)
VIDEO
IP/NETWORK
Video Encoding H.264 High, Main, or Base profiles; MJPEG,
Video Streams Up to 2 simultaneous video and temperature
Frame Rate Up to 30, 25, 24, 15, 12.5, 12, 10, 8, 7.5, 6, 5,
Available Resolutions
Resolution JPEG
Width
Height
384 288 4:3 30 1.71 30 0.63
320 240 4:3 30 1.17 30 0.49
320 176 16:9 30 0.88 30 0.34
‡
Models with a “-X1” suffix part number have a maximum ips of 8.3.
Supported Protocols TCP/IP, UDP/IP (Unicast, Multicast IGMP),
Note: Supports mixed IPv4 and IPv6 environments, but not IPv6-only
deployments.
Users
Unicast Up to 20 simultaneous users depending on
Multicast Unlimited users H.264
Security Access Password protected
Software Interface Web browser view and setup
Video Port 75 ohms, unbalanced
Note: The video port is for image viewing only. Thermography functionality
is not enabled through the video port.
Video Modes NTSC or PAL
Video Level 1 Vp-p
and JPEG
streams, including a separate, low
bandwidth, metadata stream; the second
stream is variable based on the setup of the
primary stream
4, 3, 2.5, 2, 1 (dependent upon video or
temperature stream configuration)
H.264 High
Profile
Aspect Ratio
‡
Maximum IPS
Recommended
‡
Bit Rate (Mbps)
Maximum IPS
384 x 288 Resolution
UPnP, DNS, DHCP, RTP, RTSP, NTP, IPv4, IPv6,
SNMP, QoS, HTTP, HTTPS, LDAP (client), SSH,
SSL, SMTP, FTP, and 802.1x (EAP)
resolution settings (2 guaranteed streams)
Recommended
Bit Rate (Mbps)
TECHNICAL SPECIFICATIONS
ELECTRICAL
Ethernet Port Inline RJ-45 for 100Base-TX,
Ethernet Cabling Required Cat5 or better for 100Base-TX
Input Power Range +15%/–20%
Local Memory Storage Micro SD (max. 2 gb)
Alarm Inputs N.O. switch, N.C. switch, or 1 kohm;
FIXED
Input Power 24 VAC or 24 VDC
Power Consumption Lens
24 VAC 14.25, 35, 50 mm 1.51 A, 39.90 VA (35 W)
24 VDC 14.25, 35, 50 mm 1.26 A, (35 W)
Current Consumption <750 mA nominal; <1.2 A maximum
Audio Output 0 to 32 VDC maximum, 100 mA maximum
Audio Input Bidirectional, half duplex; line level/external
Compression G.711 PCM, 64 kbps
PAN/TILT
Input Power 24/120/230 VAC, 50/60 Hz, switch selectable
Power Consumption Lens
24 VAC 14.25, 35, 50 mm 3.87 A, 102.2 VA (100 W)
115 VAC 14.25, 35, 50 mm 0.83 A, 109.4 VA (105 W)
230 VAC 14.25, 35, 50 mm 0.41 A, 109.4 VA (105 W)
24 VAC Fuse 8.0 A, slow-blow
120/230 VAC Fuse 2 A, slow-blow
Heater Thermostat controlled
Mechanical Relay Output
Solid-State Relay Output
Audio
Input UTP 600 ohm mono, 12 VDC power source,
Compression G.711 PCM, 64 kbps
Serial Control Port 4-wire, RS-422/RS-485
Serial Control Cabling Type UTP
§
Assumes maximum operating capacity.
auto MDI/MDI-X
supervised
Power
microphone input; 600 Ohm differential;
1 Vp-p maximum signal level
for 120/230 VAC
Power
§
Voltage Current Power
60 VDC, 125 VAC 1 A 62.5 VA, 30 W
§
32 V 100 mA (N/A)
line level/external microphone input, 1 Vp-p
maximum signal level
MECHANICAL
Latching 2 captive Torx™ screws
FIXED
Cable Entry 2 adjustable 0.5-inch NPT liquid-tight glands
PAN/TILT
Pan Movement 360° continuous pan rotation
Vertical Tilt 33° to –79° unobstructed from horizontal
Variable Pan/Tilt Speed I
Pan 0.1° to 100°/sec
Tilt 0.1° to 30°/sec
Preset Speeds
Pan 100° per second
Tilt 30° per second
P Control
GENERAL
Construction Aluminum
Finish Gray polyester powder coat
Environment Indoor/outdoor
Operating Temperature –40° to 50°C (–40° to 122°F)
Storage Temperature –40° to 60°C (–40° to 140°F)
Cold Start –40° to 50°C (–40° to 122°F)
Weight Unit
SP-TM314 3.1 kg (6.9 lb) 4 kg (9 lb)
SP-TM335 3.2 kg (7.2 lb) 4 kg (9 lb)
SP-TM350 3.3 kg (7.3 lb) 4 kg (9 lb)
SP-ESTM314-2N/5N 11.2 kg (24.6 lb) 15 kg (33 lb)
SP-ESTM314-2W/5W 11.8 kg (26.1 lb) 16 kg (34 lb)
SP-ESTM335-2N/5N 11.3 kg (24.9 lb) 15 kg (33 lb)
SP-ESTM335-2W/5W 12.0 kg (26.4 lb) 16 kg (35 lb)
SP-ESTM350-2N/5N 11.3 kg (25.0 lb) 15 kg (33 lb)
SP-ESTM350-2W/5W 12.0 kg (26.5 lb) 16 kg (35 lb)
Shipping
TECHNICAL SPECIFICATIONS
12.06
(4.75)
13.97
(5.50)
2.54 X 0.95
(1.0 X 0.375)
PEDESTAL MOUNT MODELS
WALL MOUNT MODELS
PEDESTAL MOUNTING PATTERN
WALL MOUNTING PATTERN
NOTE: VALUES IN PARENTHESES ARE INCHES; ALL OTHERS ARE CENTIMETERS.
12.57
(4.95)
12.77
(5.03)
12.57
(4.95)
2.54
(1.00)
57.15
(22.50)
37.59
(14.80)
33.78
(13.30)
5.08
(2.00)
Ø 2.03 X 0.95
(0.8 X 0.375)
Ø 0.381 (0.150) 3X
7.62 (3.00) B.
C.
Ø 3.81
(1.50)
12.06
(4.75)
15.24
(6.00)
19.71
(7.76)
12.57
(4.95)
19.71
(7.76)
25.91
(10.20)
25.91
(10.20)
60.07
(23.65)
23.32
(9.18)
32.49
(12.79)
TECHNICAL SPECIFICATIONS
Pelco, the Pelco logo, and other trad emarks associated with Pelco products referred
to in this publication are trademarks of Pelco, Inc. or its affiliates. ONVIF and the
ONVIF logo are trademarks of ONVIF Inc. All othe r product names and
services are the property of their respective comp anies.
Product specifications and availability are subject to change without no tice.
©Copyright 2015, Pelco, Inc. All rights reserved.
MODELS*§
Lens Frame Rate
14.25 mm
35 mm
50 mm
*Some models might be subject to US government export control regulations.
†
Pedestal mount models include Esprit EPP pedestal adapter plate. Use with PM2000/PM2010 mount (not supplied) for pedestal application.
‡
Wall mount models include Esprit EWM wall mount. Optional mounting adapters for corner, pole, and parapet applications are available.
30 ips SP-ESTM314-2N SP-ESTM314-5N SP-ESTM314-2W SP-ESTM314-5W SP-TM314
8.33 ips SP-ESTM314-2NX1 SP-ESTM314-5NX1 SP-ESTM314-2WX1 SP-ESTM314-5WX1 SP-TM314-X1
30 ips SP-ESTM335-2N SP-ESTM335-5N SP-ESTM335-2W SP-ESTM335-5W SP-TM335
8.33 ips SP-ESTM335-2NX1 SP-ESTM335-5NX1 SP-ESTM335-2WX1 SP-ESTM335-5WX1 SP-TM335-X1
30 ips SP-ESTM350-2N SP-ESTM350-5N SP-ESTM350-2W SP-ESTM350-5W SP-TM350
8.33 ips SP-ESTM350-2NX1 SP-ESTM350-5NX1 SP-ESTM350-2WX1 SP-ESTM350-5WX1 SP-TM350-X1
Pan/Tilt Pedestal Mount
24 VAC 120/230 VAC 24 VAC 120/230 VAC 384 x 288
†
CERTIFICATIONS/RATINGS/PATENTS
• CE, Class A
• FCC, Class A
• UL/cUL Listed
•C-Tick
• Meets NEMA Type 4X and IP66 standards
• Shock and Vibration, Meets NEMA TS 2; IEC613736-8, -9, -10
®
• Cisco
Medianet (MSP) Compatible
Pan/Tilt Wall Mount
RECOMMENDED MOUNTS AND ADAPTERS FOR
PAN/TILT CAMERAS
ECM100 Corner mount adapter; for use with EWM
EPM Pole mount adapter; for use with EWM wall
EA4348 Parapet mount adapter; for use with EWM
‡
Fixed Camera
wall mount
mount
wall mount
RECOMMENDED MOUNTS FOR FIXED CAMERAS
CEILING/PEDESTAL
EM1009U, EM1015U Medium duty ceiling/pedestal mount
PM2000/PM2010 Pedestal mount with cable feedthrough; for
use with Esprit systems with EPP pedestal
adapter plate
PP4348 Rooftop parapet mount; use with EA4348
adapter
WALL
EM1450 Light duty wall mount
EM1900U Medium duty wall mount
PIPE/POLE
RECOMMENDED POWER SUPPLIES
MCS Series Multiple 24 VAC camera power supply, indoor
WCS Series Single/multiple 24 VAC camera power supply,
outdoor
EM1109 Medium duty pedestal mount for horizontal or
vertical pipe/pole applications
EM2000 Medium duty mount for vertical applications
RECOMMENDED WEATHER STATION
§
1-27PCDJ
Includes a web-enabled meteorological
station controller by Xytronix. Sensors by
©
RM Young
are available for automatic
atmospheric correction.
OPTIONAL ACCESSORIES
SECURE-SLA License Enables Information Assurance compliant
§
1-2DIKG7
mode of operation
Milestone© plugin
Pelco by Schneider Electric
3500 Pelco Way, Clovis, California 93612-5699 United States
USA & Canada Tel (800) 289-9100 Fax (800) 289-9150
International Tel +1 (559) 292-1981 Fax +1 (559) 348-1120
www.pelco.com www.pelco.com/community
§
Browse special manufacturing request (SMR) cameras and options
using the SMR catalog: http://specialmodifications.pelco.com.
Loading...