Pelco SP01-001 Specsheet

SPECIAL PRODUCT SPECIFICATION

®

20.19

(51.28)

13.8

(35.25)

6.0

(15.2)

4.75

(12.0)

Ø .365 (.927)
4X ON 4.00(10.16) B.C.

NOTE: VALUES IN PARENTHESES ARE CENTIMETERS;

ALL OTHERS ARE INCHES.

SP01-001 Dome Mount

Product Features

• International Hole Pattern

• For Use With Spectra

®

, DF5, and DF8 Series Pendant Domes

(and Any Domes That Use 1.5-inch NTP Pipe)

• For Outdoor and Indoor Use

• Aluminum Construction, Gray Polyester Powder Coat

• Cable Feedthrough

• Supports Up To 40 Pounds (18 Kg)

• Easy To Install With Standard Tools

Description

The

SP01-001

with Spectra
that uses 1.5-inch (3.81 cm) NPT pipe. The mount attaches to
rooftops and any flat horizontal surface. The flange was designed
specifically for pole-top applications that use the 4.0-inch (10.16 cm)
PCD (pitch circle diameter) mounting pattern commonly used in
international applications. The

4.75-inch (12.0 cm) hole pattern that accommodates standard Pelco
pedestal mounts. The
center of the tube to conceal wiring.

dome mount is designed for outside and inside use

®

, DF5, and DF8 domes, plus any other pendant dome

SP01-001

SP01-001

allows cable to be fed through the

flange also has a

SP DISCLAIMER

SP products carry a 90-day warranty and are not returnable. SP
products do not carry any agency certifications. Pelco strongly
encourages installers to strictly follow local codes and regulations
governing the installation of video security equipment and therefore
assumes no liability for the installation of products depicted herein.

TECHNICAL SPECIFICATIONS

Construction Aluminum
Finish Light gray polyester powder coat
Suggested
Mounting Method Four 5/16-inch (7.94 mm) diameter

Maximum Load 40 lb (18 kg)
Weight 3.25 lb (1.47 kg)
Shipping Weight 9 lb (4 kg)

(Design and product specifications subject to change without notice.)

Pelco Worldwide Headquarters:

3500 Pelco Way, Clovis, California 93612-5699 USA

USA & Canada
International
www.pelco.com

fasteners (not included) are
recommended

Tel: [phone] • FAX [phone]
Tel: [phone] • FAX [phone]

Pelco, the Pelco logo, and Spectra are registered trademarks of Pelco.

Specifications subject to change without notice.

©Copyright 2004, Pelco. All rights reserved.