Pelco SMLE1-9V5-3H, SMLE1-12V5-4H, SMLE1-15V5-3H, SMLE1-20V5-4H, SMLE1-24V5-3H specification sheets

SARIX

9 MP 12 MP 15 MP 20 MP 24 MP 32 MP

The Pelco Sarix Multi Enhanced camera delivers multi-directional coverage from a single vantage point, offering security
teams exceptional situational awareness of wide areas using fewer cameras. This analytics-enabled camera helps to reduce
blind spots and can take on the most difficult lighting conditions across vast areas, while providing high-quality, panoramic
views. All of this is backed by a 5-year warranty from a brand you can trust.

MULTI ENHANCED CAMERA

®

FEATURES

MULTI-DIRECTIONAL COVERAGE

Achieve 180, 270 or 360-degree views with the camera’s
three or four configurable sensors for full coverage and to
reduce blind spots.

VARIFOCAL LENSES

Have greater flexibility with the ability to configure the field
of view, allowing you to monitor and take a closer look at
what’s most relevant for the application. Includes lens
distortion correction for an optimal viewing experience.

DATA SECURITY & PROTECTION

Meet the high data security standards required by federal
government agencies and heavily regulated enterprises with
FIPS-compliant cryptography support, integrated TPM and
Secure Boot.

ONVIF is a trademark of Onvif, Inc.

PELCO SMART ANALYTICS, POWERED BY MOTOROLA SOLUTIONS

Stay a step ahead of critical events with built-in analytics
providing improved object detection and classification.

IMPACT & WEATHER RATED

Protects against impact, water and windblown dust with IK10
and IP66/67 ratings. Resists corrosion with NEMA 250 Type 4X
rating and meets TS2 standards.

OPEN SYSTEM

ONVIF Profile S, G, T and M compliance allows for easy
integration with existing ONVIF infrastructures. Interoperable
with Pelco VideoXpert and other leading video management
systems.

SPECIFICATIONS

IMAGE PERFORMANCE 3.0 MP 5.0 MP 4K(8.0MP)

Image Sensor 1/2.8” CMOS 1/2.8" CMOS

Active Pixels

3 x Image Sensor, Max Resolution
(per image sensor)

4 x Image Sensor, Max Resolution
(per image sensor)

Sensor Aspect Ratio 4:3 4:3 16:9

IRIllumination - Optional
(high power 850 nm LEDs)

1

1920 (H) x 1080 (V) (16:9)
2048 (H) x 1536 (V) (4:3)

5760 (H) x 1080 (V) (16:9)
6144 (H) x 1536 (V) (4:3)

7680 (H) x 1080 (V) (16:9)
8192 (H) x 1536 (V) (4:3)

30 m (98 ft) maximum distance at 0 lux when camera is mounted at 4 m (13 ft) off the ground

2560 x 1440 (16:9)
2592 x 1944 (4:3)

7680 x 1440 (16:9)
7776 x 1944 (4:3)

10240 x 1440 (16:9)
10368 x 1944 (4:3)

3840 x 2160 (16:9)
2880 x 2160 (4:3)

11520 x 2160 (16:9)
8640 x 2160 (4:3)

15360 x 2160 (16:9)
11520 x 2160 (4:3)

Minimum Illumination

Dynamic Range

3D Noise Reduction Filter Yes

Image Rate-Full Feature Mode2:

3 x Image Sensor (60 Hz, 50 Hz) 30 / 25 fps 30 / 25 fps 24 / 20 fps

4 x Image Sensor (60 Hz, 50 Hz) 30 / 25 fps 24 / 25 fps 17 / 16 fps

Image Rate-High Framerate Mode3:

3 x Image Sensor (60 Hz, 50 Hz) 60 / 50 fps 40 / 33 fps 24 / 25 fps

4 x Image Sensor (60 Hz, 50 Hz) 40 / 33 fps 30 / 25 fps 20 / 20 fps

1

The IR intensity is based on supplied PoE power.

2

Full Feature Mode: Analytics and WDR enabled with H.265.

3

High Frame Rate Mode: Analytics disabled with H.265. Max frame rate with WDR enabled is 30 fps.

WDR On 120 dB, true WDR, dual exposure

WDR Off 80 dB

0.020 lux (F1.5) in color mode

0.018 lux (F1.5) in mono mode
0 lux with optional IR illuminator

0.020 lux (F1.5) in color mode

0.016 lux (F1.5) in mono mode
0 lux with optional IRilluminator

IMAGE CONTROL

Image Compression Method H.264 Pelco Smart Compression, H.265 Pelco Smart Compression, Motion JPEG

Streaming Multi-stream H.264, Multi-stream H.265, Motion JPEG

Motion Detection Selectable sensitivity and threshold

Electronic Shutter Control Automatic, Manual (1/7.5 to 1/8000 sec)

Iris Control Fixed

Day/Night Control Automatic, Manual

Flicker Control 60 Hz, 50 Hz

White Balance Automatic, Manual

Backlight Compensation Adjustable

Privacy Zones Up to 64 zones

[e-mail]|pelco.com 2

LENS (PER IMAGE SENSOR) 3.0 MP 5.0 MP 4K (8.0 MP)

Lens and Horizontal Field of View Based
on Aspect Ratio

Lens and Vertical Field of View Based on
Aspect Ratio

Aperture Range F1.5 - F1.9

Control Fixed Iris, Remote Focus and Zoom

53° - 97° (16:9)
53° - 99° (4:3)

29° - 50° (16:9)
39° - 69° (4:3)

58° - 106° (16:9)
43° - 74° (4:3)

32° - 55° (16:9)
32° - 55° (4:3)

NETWORK

Network Gigabit Ethernet, 100BASE-TX, 1000BASE-TX

Cabling Type CAT5E

Connector RJ-45

API ONVIF® compliance Profile S, T, G and M (www.onvif.org)

Security

Secure Boot Yes

Protocol IPv4, IPv6, HTTP, HTTPS, SOAP, DNS, NPT, RTSP, RTCP, RTP, TCP, UDP, IGMPv2, ICMP, DHCP, Zeroconf, ARP, HSTS

Streaming Protocols RTP/UDP, RTP/UDP multicast, RTP/RTSP/TCP, RTP/RTSP/HTTP/TCP, RTP/RTSP/HTTPS/TCP, HTTP

Device Management Protocols SNMP v2c, SNMP v3

Signed and encrypted firmware, password protection, HTTPS encryption, digest authentication, WS authentication, user
access log, 802.1x port based authentication, TLS1.3, FIPS140-2 Level 3 via onboard TPM

PERIPHERALS

USBPort USB 2.0

Onboard Storage

Dual MicroSD/microSDHC/microSDXC slot - video speed class card required. Class V10 or better recommended. The dual
SD cards will work as one contiguous region of storage.

AUXILIARY I/O

Audio Compression Method G.711 PCM 8 kHz, Opus

Audio Input/Output Line level input and output

External I/O Terminal Alarm In, Alarm Out

ELECTRICAL IN-CEILING SURFACE MOUNT PENDANT MOUNT

With IR:
52 W with 24 VDC

Power Consumption

External Power 24 VDC ± 10 %; 24 VAC rms ± 10 %, 50 or 60 Hz

PoE 30 W IEEE 802.3at Type 2 (PoE+)

Redundant Power Seamless failover between PoE and Aux and back without interruption in camera operation

*

Supported high power PoE products are listed in the Optional Injectors and Switches Section and may require adjusting the PoE mode switch. Contact sales or technical support for
more information.

26 W with 24 VDC
37 VA with 24 VAC

25.5 W with IEE 802.3at Type 2 (PoE+)

74 VA with 24 VAC
51 W with high power PoE (PoE++)

Without IR:
26 W with 24 VDC
37 VA with 24 VAC

25.5 W with IEEE 802.3at Type 2 (PoE+)

With IR: 60 W (PoE++): IEEE 802.3bt Type 3, Cisco® UPoE or legacy high-power
PoE*
Up to 35% IR Power or without IR: 30 W IEEE 802.3at Type 2 (PoE+)

With IR:
52 W with 24 VDC
74 VA with 24 VAC
51 W with high power PoE (PoE++)

Without IR:
26 W with 24 VDC
37 VA with 24 VAC

25.5 W with IEEE 802.3at Type 2 (PoE+)

[e-mail]|pelco.com 3

MECHANICAL IN-CEILING SURFACE MOUNT PENDANT MOUNT

Overall:
298 mm x 161 mm

Dimension

Weight

Body Aluminum, Plastic dome trim Aluminum Aluminum

Finish

Optional IRIlluminator Ring Not available Optional accessory, 30 m (98 ft)IRrange

(11.75" x 6.33")

Below mounting surface:
298 mm x 64 mm
(11.75" x 2.52")

Mount:1100 g (2.4 lbs)
Bezel: 490 g (1.1 lbs)
Camera Module (4 lenses): 1590 g (3.5
lbs)

Plastic, Injection Molded, Pantone
427C

304 mm x 114 mm
(11.95"x 4.48")

Mount:950 g (2.1 lbs)
Bezel:1250 g (2.8 lbs)
Camera Module (4 lenses): 1590 g (3.5
lbs)
Optional IRIlluminator Ring:670 g (1.5
lbs)

Cast, Anodized and Powder Coated,
Pantone 427C

With Mount:
401 mm x 329 mm x 260 mm
(15.77"x 12.96 "x 10.25")

With NPTAdapter:
248 mm x 329 mm
(9.75" x 12.96 ")

Wall Mount:1190 g (2.6 lbs)
NPTAdapter Mount:470 g (1.04 lbs)
Pendant:1680 g (3.7 lbs)
Bezel:1250 g (2.8 lbs)
Camera Module (4 lenses): 1590 g (3.5
lbs)
Optional IRIlluminator Ring:670 g (1.5
lbs)

Cast, Anodized and Powder Coated,
Pantone 427C

ENVIRONMENTAL IN-CEILING SURFACE MOUNT PENDANT MOUNT

Operating Temperature -10 °C to +50 °C (14 °F to 122 °F) -40 °C to +60 °C (-40 °F to 140 °F)

Storage Temperature -30 °C to +70 °C (-22 °F to 158 °F)

Humidity 0 - 95% non-condensing

IR Illumination Behavior Not applicable

IR illuminator will turn off if the temperature is 53 °C (127 °F) or higher. The
illuminator will operate at 60% power if the temperature is between 44 °C (102 °F)
and 53 °C (127 °F). Hysteresis: 6 °C (10.8 °F).

For 25.5 W PoE+, the IR illuminator will operate at only 35% power and will turn
off if the temperature is below -26 °C (-15 °F).

PER SENSOR

Tilt 7° to 96 ° from horizon

Pan +/-120 ° (depending on position of image sensors)

Azimuth +/-180 °

CERTIFICATIONS IN-CEILING SURFACE MOUNT PENDANT MOUNT

Certifications/Approvals UL, cUL, CE, ROHS, RCM, BIS, UKCA, NOM, KC

Safety Standards

Environmental Standards/Ratings IEC 60529 IP5X rating (dust only)

Electromagnetic Emissions Standards

Electromagnetic Immunity Standards

NEMA TS2 Not applicable NEMA TS2 paragraph 2.2.7 - 2.2.9

UL 62368-1, CSA 62368-1, IEC/EN 62368-1

UL 2043 (Plenum) IEC/EN 62471

IEC 60529 IP66, IP67 rating
IEC/EN 62262 Impact (IK 10)
IEC/EN 60068-2-6 Product Vibration
IEC/EN 60068-2-27 Product Shock
Type 4X

FCC Part 15 Subpart B (Class A)
ICES-003 (Class A)
EN 55032 (Class A)
EN 61000-3-2
EN 61000-3-3

EN 55035
EN 61000-6-1
EN 50121-4
EN 50130-4

[e-mail]|pelco.com 4

SUPPORTED ANALYTICS EVENTS

Object in Area The event is triggered when the selected object type moves into the region of interest.

Object Loitering

Objects Crossing Beam

Object Appears or Enters Area The event is triggered by each object that enters the region of interest. This event can be used to count objects.

Object Not Present in Area The event is triggered when no objects are present in the region of interest.

Objects Enter Area The event is triggered when the specified number of objects have entered the region of interest.

Objects Leave Area The event is triggered when the specified number of objects have left the region of interest.

Object Stops in Area

Object Too Close The event is triggered when an object moves to within a certain threshold distance of another object.

Direction Violated The event is triggered when an object moves in the prohibited direction of travel.

Sabotage Detection The event is triggered when the scene unexpectedly changes.

The event is triggered when the selected object type moves into the region of interest and then stays for an extended
amount of time.

The event is triggered when the specified number of objects have crossed the directional beam that is configured over
the camera’s field of view. The beam can be unidirectional or bidirectional.

The event is triggered when an object moves into a region of interest and then stops moving for the specified threshold
time.

SUPPORTED CLASSIFIED OBJECT TYPES

Object Types in Outdoor Mode Person and Vehicle, sub-types: Car, Truck, Bicycle, Motorcycle, Bus

Object Types in Indoor Mode Person

OUTLINE DIMENSIONS

SURFACE MOUNT

PENDANT WALL MOUNT

PENDANT NPT MOUNT

[X.X] INCHES

X MM

[e-mail]|pelco.com 5

IN-CEILING MOUNT

WALL MOUNT

METAL CEILING PANEL

[e-mail]|pelco.com 6

ORDERING INFORMATION

The variety of mounting options for the Sarix Multi Enhanced Camera provides maximum flexibility. All the available camera
modules can be used in any of the mounting options.

MOUNTING SCENARIO ORDERING INFORMATION

Order one of:

l

Camera base module

l

PENDANT WALL MOUNT

PENDANT NPT MOUNT

SURFACE MOUNT

IMD1-PMT

l

IMD1-SPLD0 or IMD1-SPLD1

l

WLMT-1001

l

Optional, IMD1-IR

Order one of:

l

Camera base module

l

IMD1-PMT

l

IMD1-SPLD0 or IMD1-SPLD1

l

NPTA-1001

l

Optional, IMD1-IR

Order one of:

l

Camera base module

l

IMD1-SMT

l

IMD1-SPLD0 or IMD1-SPLD1

l

Optional, IMD1-IR

Order one of:

l

Camera base module

IN-CEILING MOUNT

l

IMD1-INC

l

IMD1-INCLD1 or IMD1-INCLD0

l

Optional, CLPNL-1001 if ceiling panel is needed

CAMERA MODULES

With the modular design of the Sarix Multi Enhanced Camera, any camera module can be paired with any mounting adapter
for maximum versatility and optimal installation. Each camera module must be ordered with a matching mounting adapter
and dome cover. For complete coverage on the outside corner of a building, including downwards, order a 4-imager 360
degree model.

DISPLAY PART NUMBER DESCRIPTION

SMLE1-9V5-3H 3x3MP, WDR, 270 degree max field of view, SureVision, 3.3-5.7mm, Analytics Camera Base Module

SMLE1-12V5-4H 4x3MP, WDR, 360 degree max field of view, SureVision, 3.3-5.7mm, Analytics Camera Base Module

SMLE1-15V5-3H 3x5MP, WDR, 270 degree max field of view, SureVision, 3.3-5.7mm, Analytics Camera Base Module

SMLE1-20V5-4H 4x5MP, WDR, 360 degree max field of view, SureVision, 3.3-5.7mm, Analytics Camera Base Module

SMLE1-24V5-3H 3x8MP, WDR, 270 degree max field of view, SureVision, 3.3-5.7mm, Analytics Camera Base Module

SMLE1-32V5-4H 4x8MP, WDR, 360 degree max field of view, SureVision, 3.3-5.7mm, Analytics Camera Base Module

MOUNTING ADAPTERS AND DOME COVERS

The Sarix Multi Enhanced Camera modular design provides pendant, surface, or in-ceiling mounting adapters and a choice of
two lower domes compatible with all the Sarix Multi Enhanced Camera camera modules.

[e-mail]|pelco.com 7

DISPLAY PART NUMBER DESCRIPTION

IMD1-SMT Outdoor surface mount adapter, must order either a IMD1-SPLD1 or IMD1-SPLD0.

IMD1-PMT Outdoor pendant mount adapter, must order one of WLMT-1001 or NPTA-1001 and one of IMD1-SPLD1 or IMD1-SPLD0.

IMD1-INC In-ceiling adapter, must order either a IMD1-INCLD1 or IMD1-INCLD0.

IMD1-SPLD0 Lower dome, for surface or pendant mounted Sarix Multi, smoked. Not recommended for low light applications.

IMD1-SPLD1 Lower dome, for surface or pendant mounted Sarix Multi, clear.

IMD1-INCLD0 Lower dome, for in-ceiling mounted Sarix Multi, smoked. Not recommended for low light applications.

IMD1-INCLD1 Lower dome, for in-ceiling mounted Sarix Multi, clear.

WLMT-1001 Pendant wall arm adapter, for use with IMD1-PMT.

NPTA-1001 Pendant NPT adapter for use with IMD1-PMT.

PLMT-1001 Aluminum pole mount for use with WLMT-1001.

CRNMT-1001 Aluminum corner mount for use with WLMT-1001.

CLPNL-1001 Metal ceiling panel for use with in-ceiling mounted Sarix Multi Camera.

OPTIONAL IRILLUMINATOR

The optional IRIlluminator is available for the Sarix Multi Enhanced Camera when mounted in a pendant or surface mount
adapter.

DISPLAY PART NUMBER DESCRIPTION

IMD1-IR Optional IRilluminator ring, up to 30 m (100 ft), for use with IMD1-SPLD1.

OPTIONAL INJECTORS AND SWITCHES

DISPLAY PART NUMBER DESCRIPTION

PD-9001GR/AT/AC-*-MSI Indoor single port PoE+ 30W injector. Injector operational temperature range -20 °C to +40 °C (-4 °F to 104 °F).

POE60U-1BTE Gigabit 802.3bt 60 W PoE Injector, single port.

POE430-AT 4 Port PoE AT 30W Midspan AC Input. Models with US or EU power cord.

POE1236-AT 12 Port PoE AT 36W Midspan AC DC Input. Models with US or EU power cord.

POE2436-AT 24 Port PoE AT 36W Midspan AC DC Input. Models with US or EU power cord.

OPTIONAL ACCESSORIES

DISPLAY PART NUMBER DESCRIPTION

USB-AC56-NA-MSI / USB-AC56-EU-MSI USB Wi-Fi adapter

CBLKT-1001 Cable kit replacement for Multi Head cameras.

CAM-FIPS Camera license to enable FIPS cryptographic mode on the Sarix Multi Enhanced camera.

SUPPORT

Learn more and find additional documentation at pelco.com or email [e-mail] for specific product support.

Apr 2023| C5066S| Rev 1

© 2023 , Motorola Solutions, Inc. All rights reserved. MOTOROLA, MOTO, MOTOROLA SOLUTIONS, and the Stylized M Logo are trademarks or registered trademarks of Motorola
Trademark Holdings, LLC and are used under license. Pelco, the Pelco logo, and other trademarks associated with Pelco products referred to in this publication are trademarks of Pelco,
Inc. or its affiliates. All other product names and services are the property of their respective companies. Product specifications and availability are subject to change without notice.

[e-mail]|pelco.com 8