Pelco SMLE1-9V5-3H, SMLE1-12V5-4H, SMLE1-15V5-3H, SMLE1-20V5-4H, SMLE1-24V5-3H specification sheets

...

SARIX

9 MP 12 MP 15 MP 20 MP 24 MP 32 MP

The Pelco Sarix Multi Enhanced camera delivers multi-directional coverage from a single vantage point, offering security teams exceptional situational awareness of wide areas using fewer cameras. This analytics-enabled camera helps to reduce blind spots and can take on the most difficult lighting conditions across vast areas, while providing high-quality, panoramic views. All of this is backed by a 5-year warranty from a brand you can trust.

MULTI ENHANCED CAMERA

FEATURES

MULTI-DIRECTIONAL COVERAGE

Achieve 180, 270 or 360-degree views with the camera’s three or four configurable sensors for full coverage and to reduce blind spots.

VARIFOCAL LENSES

Have greater flexibility with the ability to configure the field of view, allowing you to monitor and take a closer look at what’s most relevant for the application. Includes lens distortion correction for an optimal viewing experience.

DATA SECURITY & PROTECTION

Meet the high data security standards required by federal government agencies and heavily regulated enterprises with FIPS-compliant cryptography support, integrated TPM and Secure Boot.

ONVIF is a trademark of Onvif, Inc.

PELCO SMART ANALYTICS, POWERED BY MOTOROLA SOLUTIONS

Stay a step ahead of critical events with built-in analytics providing improved object detection and classification.

IMPACT & WEATHER RATED

Protects against impact, water and windblown dust with IK10 and IP66/67 ratings. Resists corrosion with NEMA 250 Type 4X rating and meets TS2 standards.

OPEN SYSTEM

ONVIF Profile S, G, T and M compliance allows for easy integration with existing ONVIF infrastructures. Interoperable with Pelco VideoXpert and other leading video management systems.

SPECIFICATIONS

IMAGE PERFORMANCE 3.0 MP 5.0 MP 4K(8.0MP)

Image Sensor 1/2.8” CMOS 1/2.8" CMOS

Active Pixels

3 x Image Sensor, Max Resolution (per image sensor)

4 x Image Sensor, Max Resolution (per image sensor)

Sensor Aspect Ratio 4:3 4:3 16:9

IRIllumination - Optional (high power 850 nm LEDs)

1920 (H) x 1080 (V) (16:9) 2048 (H) x 1536 (V) (4:3)

5760 (H) x 1080 (V) (16:9) 6144 (H) x 1536 (V) (4:3)

7680 (H) x 1080 (V) (16:9) 8192 (H) x 1536 (V) (4:3)

30 m (98 ft) maximum distance at 0 lux when camera is mounted at 4 m (13 ft) off the ground

2560 x 1440 (16:9) 2592 x 1944 (4:3)

7680 x 1440 (16:9) 7776 x 1944 (4:3)

10240 x 1440 (16:9) 10368 x 1944 (4:3)

3840 x 2160 (16:9) 2880 x 2160 (4:3)

11520 x 2160 (16:9) 8640 x 2160 (4:3)

15360 x 2160 (16:9) 11520 x 2160 (4:3)

Minimum Illumination

Dynamic Range

3D Noise Reduction Filter Yes

Image Rate-Full Feature Mode2:

3 x Image Sensor (60 Hz, 50 Hz) 30 / 25 fps 30 / 25 fps 24 / 20 fps

4 x Image Sensor (60 Hz, 50 Hz) 30 / 25 fps 24 / 25 fps 17 / 16 fps

Image Rate-High Framerate Mode3:

3 x Image Sensor (60 Hz, 50 Hz) 60 / 50 fps 40 / 33 fps 24 / 25 fps

4 x Image Sensor (60 Hz, 50 Hz) 40 / 33 fps 30 / 25 fps 20 / 20 fps

The IR intensity is based on supplied PoE power.

Full Feature Mode: Analytics and WDR enabled with H.265.

High Frame Rate Mode: Analytics disabled with H.265. Max frame rate with WDR enabled is 30 fps.

WDR On 120 dB, true WDR, dual exposure

WDR Off 80 dB

0.020 lux (F1.5) in color mode

0.018 lux (F1.5) in mono mode 0 lux with optional IR illuminator

0.020 lux (F1.5) in color mode

0.016 lux (F1.5) in mono mode 0 lux with optional IRilluminator

IMAGE CONTROL

Image Compression Method H.264 Pelco Smart Compression, H.265 Pelco Smart Compression, Motion JPEG

Streaming Multi-stream H.264, Multi-stream H.265, Motion JPEG

Motion Detection Selectable sensitivity and threshold

Electronic Shutter Control Automatic, Manual (1/7.5 to 1/8000 sec)

Iris Control Fixed

Day/Night Control Automatic, Manual

Flicker Control 60 Hz, 50 Hz

White Balance Automatic, Manual

Backlight Compensation Adjustable

Privacy Zones Up to 64 zones

support@pelco.com|pelco.com 2

LENS (PER IMAGE SENSOR) 3.0 MP 5.0 MP 4K (8.0 MP)

Lens and Horizontal Field of View Based on Aspect Ratio

Lens and Vertical Field of View Based on Aspect Ratio

Aperture Range F1.5 - F1.9

Control Fixed Iris, Remote Focus and Zoom

53° - 97° (16:9) 53° - 99° (4:3)

29° - 50° (16:9) 39° - 69° (4:3)

58° - 106° (16:9) 43° - 74° (4:3)

32° - 55° (16:9) 32° - 55° (4:3)

NETWORK

Network Gigabit Ethernet, 100BASE-TX, 1000BASE-TX

Cabling Type CAT5E

Connector RJ-45

API ONVIF® compliance Profile S, T, G and M (www.onvif.org)

Security

Secure Boot Yes

Protocol IPv4, IPv6, HTTP, HTTPS, SOAP, DNS, NPT, RTSP, RTCP, RTP, TCP, UDP, IGMPv2, ICMP, DHCP, Zeroconf, ARP, HSTS

Streaming Protocols RTP/UDP, RTP/UDP multicast, RTP/RTSP/TCP, RTP/RTSP/HTTP/TCP, RTP/RTSP/HTTPS/TCP, HTTP

Device Management Protocols SNMP v2c, SNMP v3

Signed and encrypted firmware, password protection, HTTPS encryption, digest authentication, WS authentication, user access log, 802.1x port based authentication, TLS1.3, FIPS140-2 Level 3 via onboard TPM

PERIPHERALS

USBPort USB 2.0

Onboard Storage

Dual MicroSD/microSDHC/microSDXC slot - video speed class card required. Class V10 or better recommended. The dual SD cards will work as one contiguous region of storage.

AUXILIARY I/O

Audio Compression Method G.711 PCM 8 kHz, Opus

Audio Input/Output Line level input and output

External I/O Terminal Alarm In, Alarm Out

ELECTRICAL IN-CEILING SURFACE MOUNT PENDANT MOUNT

With IR: 52 W with 24 VDC

Power Consumption

External Power 24 VDC ± 10 %; 24 VAC rms ± 10 %, 50 or 60 Hz

PoE 30 W IEEE 802.3at Type 2 (PoE+)

Redundant Power Seamless failover between PoE and Aux and back without interruption in camera operation

Supported high power PoE products are listed in the Optional Injectors and Switches Section and may require adjusting the PoE mode switch. Contact sales or technical support for more information.

26 W with 24 VDC 37 VA with 24 VAC

25.5 W with IEE 802.3at Type 2 (PoE+)

74 VA with 24 VAC 51 W with high power PoE (PoE++)

Without IR: 26 W with 24 VDC 37 VA with 24 VAC

25.5 W with IEEE 802.3at Type 2 (PoE+)

With IR: 60 W (PoE++): IEEE 802.3bt Type 3, Cisco® UPoE or legacy high-power PoE* Up to 35% IR Power or without IR: 30 W IEEE 802.3at Type 2 (PoE+)

With IR: 52 W with 24 VDC 74 VA with 24 VAC 51 W with high power PoE (PoE++)