Pelco SM-BB5PCA-3991, SD423-F-E0, SD423-F-E0-X, SD423-F-E1, SD423-F-E1-X Specsheet

...
PRODUCT SPECIFICATION
Spectra® IV SL Series Dome Systems
HIGH-PERFORMANCE INTEGRATED DOME SYSTEM
camera solutions
Product Features
Autofocus, High Resolution Integrated LowLight™ Color
Camera/Optics Package
Day/Night, 540 TVL
23X Optical Zoom
Window Blanking
Camera Title Overlay, 20 User-Definable Characters
On-Screen Compass and Tilt Display
Password Protection
Freeze Frame During Presets
Built-in Surge and Limited Lightning Protection
Integrated Passive Unshielded Twisted Pair (UTP) Circuit
Internal Scheduling Clock
Ability to Add IP Network Capability by Purchasing Optional TXB-N
Module
Modularity
Spectra® IV SL Series was designed with ease of installation and ease of maintenance in mind. Each dome system consists of three components: a back box, a dome drive, and a lower dome. These three system components are interchangeable with other Spectra IV dome systems, making retrofitting and application adjustments simple. Also, dome drives and lower domes can be removed and replaced reducing maintenance time.
Back Box
Spectra IV SL back box options include the following models: environmental in-ceiling (ideal for outdoor soffits), indoor in-ceiling, indoor surface mount, standard pendant, and environmental pendant. A passive UTP circuit is located on the door assembly for convenient video transmission through twisted pair wire. For added flexibility, Pelco fiber modules can also be attached to the door assembly for transmission over single-mode or multimode fiber.
Dome Drive
The Spectra IV SL dome drive’s integrated optics package incorporates many advanced features that allow the system to produce high quality video in the most difficult environments. The camera features 23X optical zoom and 12X digital zoom. Spectra IV SL dome drives feature an EXview HAD for increased sensitivity and LowLight scenes where minimal light is present. The camera also offers freeze frame
between presets and window blanking.
technology to compensate for
imager
IN-CEILING MODEL
SD423-F0
ENVIRONMENTAL PENDANT
(SHOWN WITH SWM-GY WALL MOUNT)
SD423-PG-E0
Lower Dome
Special consideration was taken when designing the Spectra IV SL lower dome bubble to ensure that an optimal optical relationship between the lens and bubble was achieved, providing crystal clear video at long focal lengths.
Dome Systems
Spectra IV SL dome systems feature many software enhancements that increase performance and make configuration and operation easy. An internal scheduling clock allows for the scheduling of presets and patterns. Window blanking enables a user to configure a four-sided, user­defined privacy area. Password protection prevents unauthorized users from changing the system settings. Configurable on-screen compass and tilt display provides positioning information when needed. Intuitive multi­lingual on-screen menus can be displayed in English, Spanish, Portuguese, Italian, French, German, Russian, Polish, Turkish, and Czech.
Spectra IV SL’s variable speed capabilities range from a smooth, fast pan motion of 400 degrees per second to a smooth “creep” speed of 0.1 degree per second. The system is capable of continuous 360 degrees rotation and has an “auto flip” feature that allows the dome to rotate 180 degrees and reposition itself for uninterrupted viewing of any subject that passes directly beneath the dome.
In addition, with the optional Pelco TXB-N module, you can add IP network capability at any time to a Spectra IV dome system without losing analog viewing and control. By snapping the TXB-N module into the back box, you can stream network video to a Web browser, Endura third-party software recording solution allowing integration into virtually any IP-based system.
®
, Digital Sentry®, or
International Standards
Organization Registered Firm;
ISO 9001 Quality System
C2449 / REVISED 9-19-12
TECHNICAL SPECIFICATIONS
CAMERA/OPTICS
Signal Format NTSC (DD423)
PAL (DD423-X) Scanning System 2:1 Interlace Image Sensor
Effective Pixels 1/4-inch progressive scan CCD NTSC 768 (H) X 494 (V) PAL 752 (H) X 582 (V)
Horizontal Resolution
NTSC/PAL 540 TV Lines Lens f/1.6 (focal length, 3.6 ~ 82.8 mm) Zoom 23X optical, 12X digital Zoom Speed (optical range) 2.9/4.2/5.8 seconds Horizontal Angle of View 54° at 3.6 mm wide zoom;
2.5° at 82.8 mm telephoto zoom
Focus Automatic with manual override Maximum Sensitivity at 35 IRE
NTSC/EIA 0.65 lux at 1/60 sec (color)
0.15 lux at 1/60 sec (B-W)
PAL/CCIR 0.55 lux at 1/50 sec (color)
0.12 lux at 1/50 sec (B-W)
Sync System Internal/AC line lock, phase adjustable using
remote control, V-Sync White Balance Automatic with manual override Shutter Speed Automatic (electronic iris)/manual
NTSC 1/2 ~1/30,000
PAL 1/1.5 ~1/30,000 Iris Control Automatic iris control with manual override Gain Control Automatic/OFF Video Output1 1 Vp-p, 75 ohms Video Signal-to-Noise >50 dB
DOME DRIVE FEATURES
• 64 Presets
• ±0 .1° Preset Accuracy
• Multilingual Menus (English, Spanish, Portuguese, Italian, French, German, Russian, Polish, Turkish, and Czech)
• RJ-45 Data Port for Software Update and Setup
• On-Screen Compass, Tilt, and Zoom Display
• Password Protection
• 400°/sec Pan Preset Speed and 200°/sec Tilt Preset Speed
• Rotating Discreet Liner with Sealed Fixed Bubble
• 8 Zones (configurable in size) Can Be Labeled with up to 20 Characters Each or Set to Output Blank Video
• Configurable Locations of Labels and On-Screen Displays
• Patterns: 1 On-Screen, User-Defined Configurable Pattern; Includes Pan, Tilt, Zoom, and Preset Functions
• Proportional Pan/Tilt: Continually Decreases Pan/Tilt Speeds in Proportion to Depth of Zoom
• Variable Scan Speed: Scan Speed Can Be Configurable Between 1 to 40°/sec
• Pan Motion Allows 0.1 to 150°/sec Pan Speed
• Configurable Limit Stops for Auto/Random/Frame Scan Modes
• Auto-sensing Protocol (Coaxitron Sensormatic Translator Card
• Digital Position and Zoom Control and Feedback Using D Protocol
• Built-in Menu System for Setup of Configurable Functions
• “Auto Flip” Rotates Dome 180° at Bottom of Tilt Travel
• Window Blanking: Up to 4 Four-Sided, User-Defined Shapes
• 1 Alarm Input
• 1 Auxiliary (Form C) Relay Output
• Freeze Frame Between Presets
®
, Vicon®); Accepts Other Control Protocols with Optional
®
, RS-422 Pelco P and Pelco D,
TECHNICAL SPECIFICATIONS
BACK BOX FEATURES
NOTE: VALUES IN PARENTHESES ARE INCHES; ALL OTHERS ARE CENTIMETERS.
19.30 (7.60)
Surface Mount (Indoor)
• Available in Black or White Finish
• Installs Quickly and Easily to Any Type of Ceiling
• Quick Disconnect to Dome Drive
• Injection-Molded Plastic
In-Ceiling (Indoor)
• Single Back Box for Suspended or Hard Ceiling Applications
• Requires 13.35 cm (5.25 in.) Space Above Ceiling and 8.25 cm (3.25 in.) Below
• Minimum Ceiling Thickness 1.27 cm (0.50 in.); Maximum 4.45 cm (1.75 in.)
• Quick Disconnect to Dome Drive
• Aluminum Construction
• Suitable for Use in Environmental Air Handling Spaces
Environmental In-Ceiling
• Single Back Box for Hard Ceiling Applications
• Requires 11.18 cm (4.40 in.) Space Above Ceiling and
10.92 cm (4.30 in.) Below
• Includes Heater and Fan
• Minimum Ceiling Thickness 1.27 cm (0.50 in.); Maximum 4.45 cm (1.75 in.)
• Quick Disconnect to Dome Drive
• Aluminum Construction
22.00 (8.70)
13.20 (5.20)
8.80
(3.50)
11.00 (4.40)
10.90 (4.30)
15.00 (5.90)
19.00 (7.50)
15.00 (5.90)
20.80 (8.20)
25.20 (9.90)
15.00 (5.90)
21.80 (8.60)
4.00
(1.60)
Standard and Environmental Pendant
• Standard and Environmental Models
• Standard Pendant Available in Black or Gray Finish; Environmental Pendant Gray Finish Only
• Quick Disconnect to Dome Drive
• Aluminum Construction
• Environmental Model Includes Sun Shield, Fan, and Heater
(ENVIRONMENTAL DOME
WITH SUN SHROUD SHOWN)
26.90
(10.60)
15.00 (5.90)
21.80 (8.60)
TECHNICAL SPECIFICATIONS
MECHANICAL (Dome Drive Only)
Pan Movement 360° continuous pan rotation Vertical Tilt Unobstructed +2° to –92° Manual Pan/Tilt Speeds
Pan 0.1° to 80°/sec manual operation,
150°/sec Turbo
Tilt 0.1° to 40°/sec manual operation
Preset Speeds
Pan 400°/sec Tilt 200°/sec
For variable-speed operation an appropriate controller is required (with nonvariable speed control, Spectra IV pan/tilt speed is 20°/sec)
ELECTRICAL
Input Voltage 18 to 32 VAC; 24 VAC nominal
22 to 27 VDC; 24 VDC nominal
Input Power
24 VAC 23 VA nominal (without heater);
73 VA nominal (with heater)
24 VDC 0.7 A nominal (without heater);
3 A nominal (with heater)
Fuse 1.25 A
CERTIFICATIONS/RATINGS/PATENTS
• CE, Class B
• FCC, Class B
• UL /cUL Listed
•C-Tick
• S Mark for Argentina
• Meets NEMA Type 4X, IP66 when installed properly (BB4-F-E, BB4-PB, BB4-PG, and BB4-PG-E)
• Meets NEMA Type 1, IP40 (BB4-SMW, BB4-SMB, and BB4-F)
• U.S. Patents 5,931,432; 6,793,415 B2; 6,802,656 B2; 6,821,222 B2; 7,161,615 B2
GENERAL
Construction
Back Box
Surface Mount Plastic In-Ceiling Aluminum
Pendant Aluminum Dome Drive Aluminum, thermo plastic Bubble Acrylic
Light Attenuation
Smoked f/0.5 light loss Clear Zero light loss Chrome f/2.0 light loss Gold f/2.0 light loss
Cable Entry (Back Box)
In-Ceiling and Surface Mount 0.75-inch conduit fitting
Pendant Through 1.5-inch NPT pendant mount
Weight (approximate) Unit
Back Box
Surface Mount 0.32 kg (0.7 lb) 0.90 kg (2 lb)
In-Ceiling 0.68 kg (1.5 lb) 0.90 kg (2 lb)
Environmental
In-Ceiling 0.95 kg (2.1 lb) 1.36 kg (3 lb)
Standard Pendant 1.09 kg (2.4 lb) 1.81 kg (4 lb)
Environmental Pendant 1.59 kg (3.5 lb) 2.27 kg (5 lb) Dome Drive 1.48 kg (3.3 lb) 2.27 kg (5 lb) Lower Dome
Surface Mount 0.18 kg (0.4 lb) 0.45 kg (1 lb)
In-Ceiling 0.09 kg (0.2 lb) 0.45 kg (1 lb)
Pendant and
Environmental
In-Ceiling 0.27 kg (0.6 lb) 0.90 kg (2 lb)
Environment
Surface Mount Indoor In-Ceiling Indoor Environmental In-Ceiling Outdoor Pendant, Standard and Environmental Indoor/outdoor
Operating Temperature
Surface Mount and Indoor In-Ceiling 0° to 50°C (32° to 122°F) Standard Pendant (Assumes no wind chill factor)
Maximum 45°C (113°F) absolute maximum;
35°C (95°F) sustained maximum
Minimum –4°C (25°F) sustained minimum Environmental In-Ceiling and Environmental Pendant (Assumes no wind chill factor)
Maximum 60°C (140°F) absolute maximum;
50°C (122°F) sustained maximum
Minimum –51°C (–60°F) absolute minimum; prevents
icing at sustained minimum of –45°C (–50°F); de-ices 2.5 mm (0.1 in.) within 3 hours after power-up
TS2 –34° to 74°C (–29.2° to 165°F)
Per NEMA TS2, para. 2.1.5.1, using fi g. 2.1 test profile
Effective Projected Area (EPA) 20.5 square inches (without mount)
47 square inches (with IWM Series mount)
Shipping
RELATED PRODUCTS
OPTIONAL ACCESSORIES
DD5-FM Fixed camera mount adapter. Interchangeable
IPS-CABLE Remote monitor cable and software kit
IPS-RDPE-2* Remote data port. 24 VAC, wall/pole mount
TXB Series* Translator boards for AD
TXB-N Series* Network-based communication module that
FS85011A* Fiber transmitter sends one unidirectional
*If TXB or FS85011A boards are installed, it is not possible to upgrade system
operating software through the remote data port (IPS-RDPE-2).
with all Spectra IV dome drives.
consisting of the Spectra IV remote monitor interface cable and necessary software for use with a PC. Refer to www.pelco.com for a list of compatible devices.
video/data breakout box. Allows ground-level control/configuration and software upgrades when used with the IPS-CABLE.
Hernis, Bosch
®
Manchester,
(Philips, Burle), TASS, and
NTCIP protocols.
allows you to control and monitor Spectra IV dome systems over an IP network (in-ceiling and pendant models only). When TXB-N is installed in the camera’s back box, the camera system supports Web and Endura connectivity, and open architecture connectivity to third-party software. TXB-N allows simultaneous access to the camera from both an analog and IP-based control point.
composite video channel and one bidirectional data channel over one multimode or single-mode fiber optical cable.
RECOMMENDED MOUNTS
Surface Mount Domes
PASMB Pendant adapter for surface mount dome,
black
In-Ceiling Domes
SD5-P 2' x 2' drop ceiling panel, aluminum
construction. Replaces 2' x 2' ceiling tile.
SCA1 Support rails for BB4-F; for use in ceiling tile
applications.
Pendant Domes
BB5-PCA-BK
BB5-PCA-GY
Pendant conduit adapter, black
Pendant conduit adapter, gray
IWM Series Wall mount, with or without integral 24 VAC,
100 VA transformer. Black or gray finish. Can be adapted for corner, parapet or pole applications.
MRCA Ceiling mount, black
PP4348 Parapet roof mount
PP350/PP351 Parapet wall/roof mount
SWM Series Compact wall mount, black or gray finish.
Can be adapted for corner or pole applications.
Not suitable for use with heavy-duty, pressurized, or stainless steel Spectra domes.
RECOMMENDED POWER SUPPLIES
MCS Series Indoor, 24 VAC power supply WCS Series Outdoor, 24 VAC power supply
Refer to individual power supply specifications for more information.
SYSTEM AND COMPONENT MODELS
SYSTEM MODEL NUMBERS
Type Back Box Color Lower Dome 23X Day/Night (NTSC) 23X Day/Night (PAL)
Surface Mount White Smoked SD423-SMW-0 SD423-SMW-0-X
r SD
Black S
Clea
Chrome SD
Gold SD
moked SD423-SMB-0
r SD423-SMB-1
Clea
423-SMW-
423-SMW-
423-SMW-
Chrome SD423-SMB-2
Gold SD423-SMB-3
In-Ceiling, Indoor Black Smoked SD423-F0 SD423-F0-X
Clea
r SD423-F1
Chrome SD423-F2
Gold SD423-F3
In-Ceiling, Environmental* Black S
moked SD423-F-E0
r SD423-F-E1
Clea
Pendant, Standard Black Smoked SD423-PB-0 SD423-PB-0-X
r SD423-PB-1
Clea
Chrome SD423-PB-2
Gold SD423-PB-3
Light Gray Smoked SD423-PG-0 SD423-PG-0-X
r SD
Clea
Chrome SD
Gold SD
423-PG-1 SD423-PG-1-X
423-PG-2 SD423-PG-2-X
423-PG-3 SD423-PG-3-X
Pendant, Environmental* Light Gray Smoked SD423-PG-E0 SD423-PG-E0-X
r SD
Clea
423-PG-E1 SD423-PG-E1-X
1
2
3
SD423-SMW-1-X
SD423-SMW-2-X
SD423-SMW-3-X
SD423-SMB-0-X
SD423-SMB-1-X
SD423-SMB-2-X
SD423-SMB-3-X
SD423-F1-X
SD423-F2-X
SD423-F3-X
SD423-F-E0-X
SD423-F-E1-X
SD423-PB-1-X
SD423-PB-2-X
SD423-PB-3-X
COMPONENT MODEL NUMBERS
Back Box Dome Drive Lower Dome
BB4-SMB Surface mount, black BB4-SMW Surface mount, white BB4-F In-ceiling, black BB4-F-E In-ceiling, black, environmental BB4-PB Pendant mount, black, standard BB4-PG Pendant mount, gray, standard BB4-PG-E Pendant mount, gray, environmental
Notes:
To order a fixed mount dome system refer to the component models above and select one each of the following options: back box (BB4-F), dome drive (DD5-FM), plus choice of lower dome (LDHQF-0, LDHQF-1, LD5F-2, or LD5F-3).
For environmental applications, you must order an environmental back box (BB4-F-E or BB4-PG-E).
DD5-FM accepts camera and lens combinations including a BNC connector up to 12.70 x 6.99 x 6.99 cm (5.00" D x 2.75" W x 2.75" H).
*Environmental dome systems include a heater and a fan, and the environmental pendant also includes a sun shield.
Use the pendant lower domes with the environmental in-ceiling and environmental pendant back boxes.
Not recommended for outdoor use due to possible light reflections.
Pelco by Schneider Electric
3500 Pelco Way, Clovis, California 93612-5699 United States
USA & Canada Tel (800) 289-9100 Fax (800) 289-9150 International Tel +1 (559) 292-1981 Fax +1 (559) 348-1120 www.pelco.com www.pelco.com/community
DD423 Day/Night (NTSC) camera (23X) DD423-X Day/Night (PAL) camera (23X) DD5-FM Removable, fixed mount bracket only (camera
and lens not included); interchangeable with all Spectra IV dome drives
Pelco, the Pelco logo, and other trademarks associat ed with Pelco products referred
to in this publication are trademarks of Pelco, Inc. or its affiliate s. ONVIF and the
ONVIF logo are trademarks of ONVIF Inc. All other product names and
Product specifications and availability are subject to change without notice.
LD53SMB-0 Smoked, surface, black LD53SMB-1 Clear, surface, black LD53SMB-2 Chrome, surface, black LD53SMB-3 Gold, surface, black LD53SMW-0 Smoked, surface, white LD53SMW-1 Clear, surface, white LD53SMW-2 Chrome, surface, white LD53SMW-3 Gold, surface, white LDHQF-0 Smoked, in-ceiling LDHQF-1 Clear, in-ceiling LD5F-2 Chrome, in-ceiling LD5F-3 Gold, in-ceiling LDHQPB-0 Smoked, pendant, black LDHQPB-1 Clear, pendant, black
‡§
Chrome, pendant, black
LD53PB-2
§
LD53PB-3
services are the property of their respective companies.
©Copyright 2012, Pelco, Inc. All rights reserved.
Gold, pendant, black
Loading...