PRODUCT SPECIFICATION
EHS8000 Series Enclosure
RUGGED, OUTDOOR, STAINLESS STEEL
camera solutions
Product Features
• High Reliability 316L Stainless Steel Construction
• Temperature Range from -30° to 50°C (-22° to 122°F)
• Meets IP66/IP68 and Type 6P Standards
• IK10 Mechanical Resistance, Vandal Resistance
• All Models Include Heater and Blower
• 24 VAC, Power Over Ethernet (PoE), and 230 VAC models
• Advanced Optics for Megapixel Camera Support
• Cable Entry Glands At the Rear of the Enclosure
• Integrated Cradle on Bottom of the Enclosure For Mounting or Used
In Conjunction With Included Wall Mount
• Easy Access for Servicing and Installation
• Sun Shroud and EMS8000 mount included
Pelco's EHS8000 Series rugged outdoor enclosure is designed to
protect camera and lens components in adverse environmental
conditions. The stainless steel construction increases reliability and
reduces the cost of maintenance.
The EHS8000 Series enclosure is easily installed in the field and its
rugged construction and high-quality seals prevent impurities from
contaminating camera and lens components.
Constructed of corrosion-resistant 316L stainless steel to IK10 and
IP66 and IP68 ratings, the rugged EHS8000 Series features a
mounting cradle, sled and track assembly for camera mounting for
easy access to the camera and lens. Power, video, and lens control
cables are routed through environmentally sealed gland fittings on
the rear of the enclosure.
All EHS8000 Series enclosures come standard with heater and
blower. Power input options include 24 VAC, 230 VAC and Power over
Ethernet while providing 24 VAC, 12 VDC, or POE power to the camera
depending on the model.
A sun shroud shields the enclosure from direct sunlight and reduces
the internal temperature by approximately 6° to 10°C (10° to 15°F).
The sun shroud and a wall mount bracket come standard with every
unit.
International Standards
Organization Registered Firm;
ISO 9001 Quality System
C4048 / Revised 5-06-19
TECHNICAL SPECIFICATIONS
65.11
(25.63)
55.00
(21.65)
20.26
(7.98)
39.79
(15.66)
41.84
(16.47)
8.25
(3.25)
EHS8000 ENCLOSURE WITH EMS8000 WALL MOUNT
5.08
(2.00)
2.54
(1.00)
M8
MECHANICAL
Camera Mounting Internal camera sled with adjustable
positioning
Camera and Lens Size Accepts camera and lens combinations up to
22.86 x 10.16 x 7.62 cm (9-in L x 4-in W x 3.5-
in H)
Viewing Window High optic grade soda lime glass, 4K ready
Viewing Area 3.00-inch diameter
Cable Entry
Maximum Cable Diameters 0.45 in (11.4 mm)
Cable Entry Holes 2 x M20 compression glands
Fastening for Front and Rear
of the Enclosure M5 screws with Torx head
CERTIFICATIONS*
•CE
• ICES-003 (Class A)
• UL /cUL Listed
• UL/IEC 60950-22 (TBD)
• Meets Type 6P, IP66, and IP68 standards
• IK10 Mechanical Impact Resistance (Mechanical enclosure only, not the
front window)
•KCC
•RCM
ELECTRICAL
Input Power 24 VAC, HPOE, or 230 VAC
Input Voltage
HPoE IEEE802.3BT
24 VAC ±10%, up to 40W (without camera), up to
53W (with 13W camera), 24 VAC output to
camera
230 VAC ±10%, up to 40W (without camera), up to
53W (with 13W camera), 12 VDC output to
camera
Maximum Power Output
to Camera 13W
GENERAL
Construction 316L stainless steel
Finish Electropolished
Environment Indoor/environmental ambient temperature
-30° to 50° C (-22° to 122°F)
Unit Length
Base 55.0 cm (21.65 in)
Overall 65.1 cm (25.63 in)
Model Unit Weight Shipping Weight
EHS8000-2-H 13.1 kg (28.9 lb 15.1 kg (33.3 lb)
EHS8000-3-H 13.23 kg (29.2 lb) 15.23 kg (33.6 lb)
EHS8000-P-H 13.23 kg (29.2 lb) 15.23 kg (33.6 lb)
EMS8000 2.03 kg (4.5 lb) 2.4 kg (5.3 lb)
EPS8000 0.85 kg (1.9 lb) 1.0 kg (2.2 lb)
RECOMMENDED CAMERAS
Sarix® Enhanced Next Generation Series
VALUES IN PARENTHESES ARE INCHES; ALL OTHERS ARE CENTIMETERS.
.