Pelco S-EM20-P, S-EM20JB-P, S-EP20-P, S-EP21-P, SM-EP20-3806 Specsheet

PRODUCT SPECIFICATION

EH20 Series Enclosure

COMPACT, INDOOR/ENVIRONMENTAL, IP-ENABLED

camera solutions

Product Features

• Side Opening for Easy Access for Servicing and Installation

• High Reliability Die-Cast Construction

• Advanced Optics for Megapixel Camera Support

• Temperature Range from –30° to 50°C (–22° to 122°F)

• Meets IP66 and Type 4X Standards

• IK10 Mechanical Impact Resistance, Vandal Resistant

• Cable Entry Glands and Mounting Holes on Bottom of Enclosure

• 24VAC or Power Over Ethernet (PoE) or Mains Power Models

• All Models Include Heater and Blower (Except EH20 and EH20-M)

• All Models Include Sun Shroud and Mount (Except EH20)

The EH20 Series is a rugged and highly reliable camera enclosure
with a side-hinged lid and adjustable sun shroud designed for easy
installation. Constructed from die-cast aluminum to IK10 and IP66,
the EH20 Series enclosure is designed to operate in a wide range
of environments and to protect electronic components in
temperatures from –30° to 50°C (–22° to 122°F).

The EH20 Series enclosure is designed for use with analog and IP
cameras that have both fixed and variable focal length lenses (with
or without auto iris operation). The side-hinged lid provides easy
access to the camera sled. Two adjustable glands (PG11) on the
bottom of the enclosure allow for easy installation of the power and
video cables.

All EH20 Series enclosures come standard with heater and blower
(except EH20 and EH20-M), a cable management wall mount bracket,
and sun shroud (except EH20). The en closure can also be ordered from
the factory with 110 to 230 VAC Mains, 24 VAC, or Power over Ether­net enclosure input voltage, 802.3af-compatible camera power, and
appropriate heater and blower power.

The EH20 Series is ideal for small- to medium-size analog and IP
cameras and can be mounted to Pelco’s EM20 (feedthrough wall
mount).

International Standards

Organization Registered Firm;

ISO 9001 Quality System

C4047 / Revised 9-06-18

TECHNICAL SPECIFICATIONS

6.22

(2.46)

5.51

(2.17)

8.94

(3.52)

15.75
(6.20)

1/4 - 20 UNC

5.00

(1.97)

5.00

(1.97)

MECHANICAL

Camera Mounting Single slot for adjustable camera positioning

Camera and Lens Size Accepts camera and lens combinations

Viewing Window 0.3 cm (0.118-inch) thick, high optic grade,

Viewing Area 8.89 x 7.62 cm (3.5" W x 3" H)
Cable Entry 2 x PG11 compression glands on bottom
Maximum Cable Diameters

PG11 1.00 cm (0.395 in.)

Cable Entry Holes Both cable entry holes are 1.87 cm (0.74-inch)

Lid Fastening Torx security screws

on camera sled

(including BNC connector)
up to 22.86 x 10.16 x 7.62 cm
(9.00" L x 4" W x 3.5" H)

soda lime glass

and will accept PG11 or 3/8-inch NPT conduit
fitting as is. Will accept PG13.5 or

1/2-inch NPT fittings if the holes are enlarged
to 2.22 cm (0.88-inch).

ELECTRICAL

Input Power 24 VAC or POE+, HPOE, or 110 VAC–230 VAC
Input Voltage

PoE IEEE802.3at compatible (heaters disabled),

24 VAC ±10%, up to 30W (without camera), up to

110 VAC

–230 VAC ±10%, up to 30W (without camera), up to

Max Power Output to Camera 13W

HPOE (heaters enabled), PoE output to camera

43W (with 13W camera), 24 VAC output to
camera.

43W (with 13W camera), 12 VDC output to
camera.

CERTIFICATIONS*

• CE (Class A)

• ICES-003 (Class A)

• UL /cUL Listed

• UL/IEC 60950-22

• Meets Type 4X and IP66 standards

• IK10 Mechanical Impact Resistance (Mechanical enclosure only; not the
front window)

•KCC

•RCM

*At the time of this publication, these certifications are pending. Consult the

factory or our Web site (www.pelco.com).

GENERAL

Construction Die-cast aluminum, ADC10
Finish Alodine with gray polyester powder coat,

RAL7047

Environment Indoor/environmental ambient temperature

–30° to 50°C (–22° to 122°F)
Power via PoE+
–10° to 50°C (14° to 122°F)

Unit Length

Base 17.09 cm (6.73 in) W x 10.90 cm (4.29 in) H x

40.57 cm (15.97 in) L
Enclosure with Sunshroud 17.09 cm (6.73 in) W x 23.96 cm (9.43 in) H
and Wall Mount 47.14 cm (18.56 in) L

Weight Unit Shipping

EH20 2.50 kg (5.50 lb) 2.81 kg (6.20 lb)
EH20-M 2.91 kg (6.40 lb) 3.32 kg (7.32 lb)
EH20-2-H 3.14 kg (6.92 lb) 3.56 kg (7.84 lb)
EH20-3-H 3.43 kg (7.56 lb) 3.62 kg (7.98 lb)
EH20-P-H 3.13 kg (6.90 lb) 3.55 kg (7.82 lb)

VALUES IN PARENTHESES ARE INCHES;
ALL OTHERS ARE CENTIMETERS.

EM20 Wall Mount (Included)

Construction Aluminum
Finish Alodine with gray polyester powder coat
Weight Unit Shipping

0.41 kg (0.90 lb) 0.56 kg (1.22 lb)

EH20 MOUNTING HOLE DIMENSIONS

RECOMMENDED CAMERAS

Sarix®, Sarix Professional, and the Sarix Enhanced series.

EM20 MOUNTING HOLE DIMENSIONS

TECHNICAL SPECIFICATIONS

21.26
(8.37)

70

(2.76)

11.23
(4.42)

EC20 OPTIONAL CEILING MOUNT

7.50

(2.95)

11.00
(4.43)

4.60

(1.81)

6.22

(2.46)

5.51

(2.17)

Ø 0.63

(0.25)

Ø 0.48

(0.19)

8.30

(3.27)

32.39

(12.75)

36.45

(14.35)

Ø 4.14

(1.63)

48.53
(19.11)

47.00

(18.50)

47.60

(18.74)

10.65
(4.19)

11.50
(4.53)

20.00
(7.87)

4.50

(1.77)

18.10
(7.13)

11.35
(4.47)

4.49

(1.77)

8.00

(3.15)

Ø 0.52

(0.20)

EP21 OPTIONAL SMALL POLE MOUNT

EM20 INCLUDED WALL MOUNT

Note: Suitable for poles with diameters of 56.7 mm to 136 mm

(2.23 in to 5.35 in).

13.34

(5.25)

24.57
(9.67)

17.05
(6.71)

21.2 6
(8.37)

70

(2.76)

44.30

(17.44)

47.14

(18.56)

VALUES IN PARENTHESES ARE INCHES;
ALL OTHERS ARE CENTIMETERS.

EH20 SERIES ENCLOSURE

TECHNICAL SPECIFICATIONS

Pelco, the Pelco logo, and other trademarks a ssociated with Pelco products referred to in this publication

are trademarks of Pelco, Inc. or its affiliates. ONVIF and the ONVIF logo are trade marks of ONVIF Inc.

All other product names and services are the property of their respective companies.

Product specifications and availability are sub ject to change without notice.

©Copyright 2018, Pelco, Inc. All rights r eserved.

27.74

(10.92)

7.50

(2.95)

16.60
(6.54)

25.00
(9.84)

18.55
(7.30)

4.49

(1.77)

8.00

(3.15)

Ø 0.52
(0.20)

17.65
(6.29)

14.32
(5.64)

4.49

(1.77)

8.00

(3.15)

13.40

(5.27)

15.00
(5.91)

9.95
(3.92)

Ø 0.52

(0.20)

MODELS

110 VAC to 230
VAC

PoE+/HPOE

Model Number

Heater Fan 24 VAC

EH20

EH20-M •

EH20-2-H • • • •

EH20-3-H • • • •

EH20-P-H • • • •

Wall Mount
Bracket

OPTIONAL ACCESSORIES

POWER SUPPLIES

Indoor/Outdoor 24 VAC

WCS1-4 Outdoor, 1 output, 4 A (100 VA) capacity
WCS4-20B Outdoor, 4 outputs, 20 A (480 VA) capacity
MCS4-2B Indoor, 4 outputs, 2 A (48 VA) capacity
MCS8-5B Indoor, 8 outputs, 5 A (120 VA) capacity
MCS16-10 Indoor, 16 outputs, 10 A (240 VA) capacity
MCS16-10SB Same as above except with circuit breakers
MCS16-20 Indoor, 16 outputs, 20 A (480 VA) capacity
MCS16-20SB Same as above except with circuit breakers

Indoor PoE

PD9601G/AC-US, -EUK* Single-port, HPoE midspan

*This PoE injector has been specifically designed to work with this enclosure

when heaters are in use. Other PoE injectors may not work.

POE1AT-US, -EU Single-port, IEEE802.3at midspan
POE4ATN-US, -EU 4-port, IEEE802.3at midspan
POE8ATN-US, -EU 8-port, IEEE802.3at midspan
POE16ATN-US, -EU 16-port, IEEE802.3at midspan

Note: The “EU/EUK“ or “US“ suffix indicates a European or US power cord.

EP20 LARGE POLE MOUNT

VALUES IN PARENTHESES ARE INCHES;
ALL OTHERS ARE CENTIMETERS.

OPTIONAL MOUNTS

EM20 Wall mount bracket with cable management
EP20 Pole mount bracket, large
EC20 Ceiling mount bracket
EP21 Pole mount bracket, small (for EM20

enclosure mount)

ACCESSORIES

EM20JB Wall mount junction box for EM20 enclosure

mount

EM20JB WALL MOUNT JUNCTION BOX

Note: Suitable for poles with diameters of 70 mm to 120 mm

(2.75 in to 4.72 in) and 120 mm to 230 mm (4.72 in to 9.05 in).

Pelco by Schneider Electric

625 W. Alluvial, Fresno, California 93711 United States

USA & Canada Tel [phone] Fax [phone]
International Tel [phone] Fax [phone]
www.pelco.com www.pelco.com/community