• 3 Autofocus, High Resolution Integrated Camera/Optics Packages
• Horizontal Zone and Window Blanking
• Sensitivity Down to 0.0015 Lux PAL (36X Models)
• On-Screen Compass and Tilt Display
• Web Browser, Endura®, and Third-Party Network Interface
• Bidirectional Full-Duplex Audio
Spectra®IV IP dome systems incorporate all of the features and
functions of Spectra IV (including analog), while allowing you to
control and monitor video over an IP network from virtually
anywhere in the world. Spectra IV IP is a high-speed dome with a
built-in 100Base-TX network interface for live streaming to any
network application. The dome system also features open
architecture connectivity for third-party software recording solutions
allowing integration into virtually any IP-based system. It is also
compatible with Digital Sentry
®
video management systems. As
with all Pelco IP camera solutions, Spectra IV IP is Endura
™
Enabled
streams. When connected to an Endura
security system, the dome system has access to EnduraStor
EnduraView
to record, manage, configure, and view multiple live
®
network-based video
™
for optimized image quality and bandwidth efficiency.
™
and
Spectra IV IP is one of the only solutions on the market that allows
you to view and control analog video while viewing, recording, and
controlling network IP video. There is no need to abandon your
current analog infrastructure if you are making the move to network
video as a recording solution. Continue to monitor and control video
in the analog domain while recording video in the network domain,
and let Spectra IV IP’s professional compression method do the
work for you without the need for external encoders.
Spectra IV IP features the same ease of installation and ease of
maintenance that you have come to expect from Spectra IV. Each
dome system consists of a back box, a dome drive, and a lower
dome. These three system components are interchangeable with
other Spectra IV IP dome systems, making retrofitting and
application adjustments simple.
As with all Spectra dome systems, Spectra IV IP features several
back box options. All back boxes feature built-in memory, which can
be used to store camera and location-specific dome settings,
including labels, presets, patterns, and zones.
All cameras in Spectra IV IP dome drives feature an EXview HAD
imager for increased sensitivity and LowLight™technology allowing
the cameras to compensate for scenes where minimal light is
present. Both the 29X and the 36X cameras feature built-in motion
detection and advanced 128X wide dynamic range (WDR) that
enables the system to compensate for scenes where dramatic
contrasts in lighting are present. The 36X day/night camera’s
electronic image stabilization digitally reduces blurring of the
camera image due to vibration caused by external sources, such as
wind and traffic.
unicast; unlimited number of users using
multicast (MPEG-4 only)
(or later), or Mac®OS X 10.3.9 (or later)
Mozilla®Firefox®1.5 (or later)
32-bit pixel color resolution
UPnP, DNS, DHCP, RTP, NTP
ENDURA
SYSTEM
INTERNET
SPECTRA IV IP
WEB
BROWSER
IMPORTANT NOTE:PLEASE READ. The network implementation is shownas a general representation only and isnot intended
to show a detailed network topology. Your actual network will differ, requiring changes or perhaps additional network equipment
to accommodate the system as illustrated. Please contact your local Pelco Representative to discuss your specific requirements.
• 400°/sec Pan Preset Speed and 200°/sec Tilt Preset Speed
• Rotating Discreet Liner with Sealed Fixed Bubble
• Window Blanking: Up to 8, Four-Sided, User-Defined Shapes
• 8 Zones (configurable in size) Can Be Labeled with up to 20 Characters
Each or Set to Output Blank Video
• 7 Alarm Inputs
• 1 Auxiliary (Form C) Relay Output and 1 Open Collector Auxiliary Output
(can be alternately configured to operate upon alarm)
• Configurable Locations of Labels and On-Screen Displays
• Action on Alarm: Alarms Can Be Individually Configured for 3 Priority
Levels, to Initiate a Stored Pattern, or to Go to an Associated Preset
When Received
• Resume After Alarm: Allows the Dome to Return to a Previously
Configured State After Alarm Acknowledgement or to its Previous
Position Before Alarm
• Multiple Park and Power-Up Action
• Patterns: Up to 8, On-Screen, User-Defined Configurable Patterns;
Includes Pan, Tilt, Zoom, and Preset Functions
• Proportional Pan/Tilt: Continually Decreases Pan/Tilt Speeds in Proportion
to Depth of Zoom
• Variable Scan Speed: Scan Speed Can Be Configurable Between
1 to 40°/sec
• Pan Motion Allows 0.1° to 150°/sec Pan Speed
• Configurable Limit Stops for Auto/Random/Frame Scan Modes
• Autosensing Protocol (Coaxitron®, RS-422 Pelco P and Pelco D,
Sensormatic®, Vicon®); Accepts Other Control Protocols with Optional
Translator Card
• Digital Position and Zoom Control and Feedback Through Pelco D Protocol
• Built-in Menu System for Setup of Configurable Functions
• “Auto Flip” Rotates Dome 180° at Bottom of Tilt Travel
Smokedf/0.5 light loss
ClearZero light loss
Chromef/2.0 light loss
Goldf/2.0 light loss
Cable Entry (back box)
In-Ceiling0.75-inch conduit fitting
PendantThrough 1.5-inch NPT pendant mount
Weight (approximate)UnitShipping
In-Ceiling2.4 kg (5.2 lb)3.6 kg (8 lb)
Environmental In-Ceiling2.8 kg (6.2 lb)4.5 kg (10 lb)
Standard Pendant3.0 kg (6.5 lb)5.0 kg (11 lb)
Environmental Pendant3.5 kg (7.6 lb)5.4 kg (12 lb)
Heavy-Duty In-Ceiling*3.3 kg (7.3 lb)5.4 kg (12 lb)
Heavy-Duty Pendant*4.5 kg (9.8 lb)7.3 kg (16 lb)
Heavy-Duty Environmental
Pendant*4.5 kg (9.8 lb)7.3 kg (16 lb)
Stainless Steel4.6 kg (10.1 lb)7.3 kg (16 lb)
Environment
In-CeilingIndoor
Environmental In-CeilingOutdoor
Pendant, Standard and
EnvironmentalIndoor/outdoor
Heavy-Duty In-CeilingIndoor
Heavy-Duty Pendant,
Standard & Environmental Indoor/outdoor
Stainless SteelIndoor/outdoor
Operating Temperature
In-Ceiling0° to 50°C (32° to 122°F)
Standard Pendant(Assumes no wind chill factor)
Maximum45°C (113°F) absolute maximum;
35°C (95°F) sustained maximum
Minimum–4°C (25°F) sustained minimum
Environmental In-Ceiling
and Environmental Pendant (Assumes no wind chill factor)
Maximum60°C (140°F) absolute maximum;
50°C (122°F) sustained maximum
Minimum–51°C (–60°F) absolute minimum; prevents
icing at sustainedminimumof –45°C (–50°F);
de-ices 2.5 mm (0.1 inch) within 3 hours after
power-up
Heavy-Duty In-Ceiling0° to 50°C (32° to 122°F)
Heavy-Duty Pendant0° to 50°C (32° to 122°F) absolute maximum;
0° to 50°C (32° to 122°F)sustained maximum
Heavy-Duty
Environmental Pendant(Assumes no wind chill factor)
Maximum60°C (140°F) absolute maximum;
50°C (122°F) sustained maximum
Minimum–51°C (–60°F) absolute minimum; minimal
icing at sustainedminimumof –45°C (–50°F);
prevents icing at sustained minimum of
–40°C (–40°F); de-ices 2.5 mm (0.1 inch)
within 3 hours after power-up
Stainless Steel(Assumes no wind chill factor)
Maximum60°C (140°F) absolute maximum;
50°C (122°F) sustained maximum
Minimum–51°C (–60°F) absolute minimum; minimal
icing at sustained minimum of –45°C (–50°F);
prevents icing at sustained minimum of
–40°C (–40°F); de-ices 2.5 mm (0.1 inch)
within 3 hours after power-up
Pan Movement360° continuous pan rotation
Vertical TiltUnobstructed +2° to –92°
Manual Pan/Tilt Speeds
Pan0.1° to 80°/sec manual operation,
150°/sec Turbo
Tilt0.1° to 40°/sec manual operation
Preset Speeds
Pan400°/sec
Tilt200°/sec
For variable-speed operation, an appropriate
controller is required. (With nonvariable
speed control, Spectra IV IP pan/tilt speed is
20°/sec)
AUDIO
StreamingBidirectional: full or half duplex
Input/OutputTerminal block, analog for microphone and
speaker; 600-ohm differential; 1 Vp-p
maximum signal level
CompressionG.711 PCM 8 bit, 8 kHz mono at 64 kbit/s
ELECTRICAL
PortsRJ-45 connector for 100Base-TX
Auto MDI/MDI-X
Autonegotiate/Manual setting
Cabling TypeCat5 or better for 100Base-TX
Input Voltage18 to 32 VAC; 24 VAC nominal
22 to 27 VDC; 24 VDC nominal
Input Power
24 VAC23 VA nominal (without heater);
73 VA nominal (with heater)
24 VDC0.7 A nominal (without heater);
3 A nominal (with heater)
Fuse1.25 A
Auxiliary Outputs2
Alarm Inputs7
CERTIFICATIONS/RATINGS/PATENTS
• CE, Class B
• FCC, Class B
• UL/cUL Listed
• C-Tick
• U.S. Patents 5,931,432; 6,793,415 B2; 6,802,656 B2; 6,821,222 B2;
7,161,615 B2
Meets the following standards:
• NEMA Type 4X, IP66 when installed properly (BB4N-F-E, BB4N-PB,
BB4N-PG, BB4N-PG-E, BB4NHD-PG, BB4NHD-PG-E, and BB4N-PSG-E)
• NEMA Type 1, IP40 (BB4N-F and BB4NHD-F)
*Add 0.90 kg (2 lb) to the total weight if the system includes a lower dome
RELATED PRODUCTS
OPTIONAL ACCESSORIES
HD-KEYS1 set of keys for heavy-duty lower dome.
IPS-CABLERemote monitor cable and software kit
consisting of the Spectra IV remote monitor
interface cable and necessary software for
use with a PC. Refer to www.pelco.com for a
list of compatible devices.
IPS-RDPE-2Remote data port. 24 VAC, wall/pole mount
video/data breakout box. Allowsground-level
control/configuration when used with the
IPS-CABLE.
LD5F-2*Flush in-ceiling lower dome with chrome
bubble (f/2.0 light loss).
LD5F-3*Flush in-ceiling lower dome with gold bubble
(f/2.0 light loss).
LD53PB-2*Pendant lower dome with black trim and
chrome bubble (f/2.0 light loss).
LD53PB-3*Pendant lower dome with black trim and gold
bubble (f/2.0 light loss).
*Not recommended for outdoor use due to possible light reflections.
RECOMMENDED MOUNTS
In-Ceiling Domes
SD5-P2' x 2' drop ceiling panel, aluminum
construction; replaces 2' x 2' ceiling tile
SCA1Support rails for BB4N-F; for use in ceiling tile
applications
Pendant Domes
BB5-PCA-BKPendant conduit adapter, black
BB5-PCA-GYPendant conduit adapter, gray
IWM SeriesWall mount, with or without integral 24 VAC,
100 VA transformer; black or gray finish; can
be adapted for corner, parapet or pole
application
MRCACeiling mount, black
PP4348Parapet roof mount
PP350/PP351Parapet wall/roof mount
SWM SeriesCompact wall mount, black or gray finish; can
be adapted for corner or pole applications
IDM4012SSStainless steel wall mount with feedthrough
capabilities
RECOMMENDED POWER SUPPLIES
MCS SeriesIndoor, 24 VAC power supply
WCS SeriesOutdoor, 24 VAC power supply
Refer to individual power supply specifications for more information.
SYSTEM AND COMPONENT MODELS
SYSTEM MODEL NUMBERS
Back
Type
In-Ceiling,
Indoor
In-Ceiling,
Environmental*
Pendant,
Standard
Pendant,
Environmental*
Heavy-Duty
In-Ceiling,
Indoor
Heavy-Duty
Pendant, Indoor
Heavy-Duty
Pendant,
Environmental*
Stainless Steel
Pendant,
Environmental*
Box Color
Black
Black
Black
Light Gray
Light Gray
Light Gray
Stainless
Steel
Lower
Dome
Smoked
Clear
Smoked
Clear
Smoked
Clear
Smoked
Clear
Smoked
Clear
Smoked
Clear
Smoked
Clear
Smoked
Clear
Smoked
Clear
*Environmental dome systems include a heater and fan, and the environmental pendant also includes a sun shield.
Note: For environmental applications you must order an environmental back box.
*Environmental models include a heater and fan, and the environmental pendant also includes a sun shield.
†
Use the pendant lower domes with the environmental in-ceiling and environmental pendant back boxes.
DD423Day/Night (NTSC) camera (23X)
DD423-XDay/Night (PAL) camera (23X)
DD429Day/Night (NTSC) camera (29X)
DD429-XDay/Night (PAL) camera (29X)
DD436Day/Night (NTSC) camera (36X)
DD436-XDay/Night (PAL) camera (36X)
†
LDHQF-0Smoked, in-ceiling
LDHQF-1Clear, in-ceiling
LDHQPB-0Smoked, pendant, black
LDHQPB-1Clear, pendant, black
LD53HDF-0Smoked, in-ceiling, heavy-duty
LD53HDF-1Clear, in-ceiling, heavy-duty
LD53HDCF-0Smoked, in-ceiling, heavy-duty