• 3 Autofocus, High Resolution Integrated Camera/Optics Packages
• Horizontal Zone and Window Blanking
• Sensitivity Down to 0.00018 Lux (35X Models)
• On-Screen Compass and Tilt Display
• Web Browser, Endura®, and Third-Party Network Interface
• Bidirectional Full-Duplex Audio
Spectra® IV IP
dome systems incorporate all of the features and
functions of Spectra IV (including analog), while allowing you to
control and monitor video over an IP network from virtually
anywhere in the world.
Spectra IV IP
is a high-speed dome with a
built-in 100Base-TX network interface for live streaming to any
network application. The dome system also features open
architecture connectivity for third-party software recording
solutions allowing integration into virtually any IP-based system. It
is also compatible with Digital Sentry
As with all Pelco IP camera solutions,
™
Enabled
to record, manage, configure, and view multiple live
®
video management systems.
Spectra IV IP
is Endura
streams. When connected to an Endura® network-based video
security system, the dome system has access to EnduraStor™ and
EnduraView™ for optimized image quality and bandwidth efficiency.
Spectra IV IP
is one of the only solutions on the market that allows
you to view and control analog video while viewing, recording, and
controlling network IP video. There is no need to abandon your
current analog infrastructure if you are making the move to network
video as a recording solution. Continue to monitor and control video
in the analog domain while recording video in the network domain,
and let
Spectra IV IP’s
professional compression method do the
work for you without the need for external encoders.
Spectra IV IP
features the same ease of installation and ease of
maintenance that you have come to expect from Spectra IV. Each
dome system consists of a back box, a dome drive, and a lower
dome. These three system components are interchangeable with
other
Spectra IV IP
dome systems, making retrofitting and
application adjustments simple.
As with all Spectra dome systems,
Spectra IV IP
features several
back box options. All back boxes feature built-in memory, which can
be used to store camera and location-specific dome settings,
including labels, presets, patterns, and zones.
All cameras in
Spectra IV IP
dome drives feature an EXview HAD
imager for increased sensitivity and LowLight™ technology allowing
the cameras to compensate for scenes where minimal light is
present. Both the 27X and the 35X cameras feature built-in motion
detection and advanced 128X wide dynamic range (WDR) that
enables the system to compensate for scenes where dramatic
contrasts in lighting are present. The 35X day/night camera’s
electronic image stabilization digitally reduces blurring of the
camera image due to vibration caused by external sources, such as
wind and traffic.
unicast; unlimited number of users using
multicast (MPEG-4 only)
(or later), or Mac® OS X 10.3.9 (or later)
Mozilla® Firefox® 1.5 (or later)
32-bit pixel color resolution
UPnP, DNS, DHCP, RTP, NTP
ENDURA
SYSTEM
INTERNET
SPECTRA IV IP
WEB
BROWSER
IMPORTANT NOTE: PLEASE READ. The network implementation is shown as a general representation only and is not intended
to show a detailed network topology. Your actual network will differ, requiring changes or perhaps additional network equipment
to accommodate the system as illustrated. Please contact your local Pelco Representative to discuss your specific requirements.
3rd PARTY
INTEGRATION
Loading...
+ 7 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.