Pelco SD4-B0, SD4-B1, SD4-W0, SD4-W1 Installation Manual
INSTALLATION
Spectra® Mini Dome
C3401M-D (3/09)
Contents
Important Safety Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Regulatory Notices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Before You Begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Package Contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Switch Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Wiring Tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Surface Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Recessed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Data Port. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
REVISION HISTORY
Manual # Date Comments
C3401M 12/05 Original version.
C3401M-A 1/06 Added warning about over-tightening mounting hardware.
C3401M-B 6/06 Updated model numbers and specifications to include black models.
C3401M-C 8/08 Added operating temperature range to specifications.
C3401M-D 3/09 Revised per CN21990 to include spring paddle flex assembly.
2 C3401M-D (3/09)
Important Safety Instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
6. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
7. Only use attachments/accessories specified by the manufacturer.
8. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid
injury from tip-over.
9. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
10. Installation should be done only by qualified personnel and conform to all local codes.
11. Unless the unit is specifically marked as a NEMA Type 3, 3R, 3S, 4, 4X, 6, or 6P enclosure, it is
designed for indoor use only and it must not be installed where exposed to rain and moisture.
12. Use only installation methods and materials capable of supporting four times the maximum
specified load.
13. Use stainless steel hardware to fasten the mount to outdoor surfaces.
14. To prevent damage from water leakage when installing a mount outdoors on a roof or wall, apply
sealant around the bolt holes between the mount and mounting surface.
15. CAUTION: These servicing instructions are for use by qualified service personnel only. To reduce
the risk of electric shock do not perform any servicing other that contained in the operating
instructions unless you are qualified to do so.
16. Only use replacement parts recommended by Pelco.
The product and/or manual may bear the following marks:
This symbol indicates that dangerous voltage
constituting a risk of electric shock is present within
this unit.
This symbol indicates that there are important
operating and maintenance instructions in the
literature accompanying this unit.
CAUTION:
RISK OF ELECTRIC SHOCK.
DO NOT OPEN.
C3401M-D (3/09) 3
Regulatory Notices
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
RADIO AND TELEVISION INTERFERENCE
This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However there is no guarantee that the interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
You may also find helpful the following booklet, prepared by the FCC: “How to Identify and Resolve
Radio-TV Interference Problems.” This booklet is available from the U.S. Government Printing Office,
Washington D.C. 20402.
Changes and Modifications not expressly approved by the manufacturer or registrant of this equipment
can void your authority to operate this equipment under Federal Communications Commission’s rules.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
4 C3401M-D (3/09)
Description
The Spectra® Mini is an indoor dome system designed for ceiling applications. The dome can be mounted
to the surface of ceilings, or it can be recessed in hard ceilings or standard 2 x 2 ft (61 x 61 cm) tiles in
suspended ceilings. The Spectra Mini includes a high resolution color camera; video output capability
through either coaxial cable or UTP wiring; pan/tilt control using Pelco D, Pelco P, or Coaxitron
and on-screen programming.
A translator board can be installed on the dome for communication with non-Pelco controllers. The dome
is compatible with the following translator boards:
®
controllers
™
controllers
TXB-AD
TXB-B
TXB-S422
TXB-V
Translator board for American Dynamics
Translator board for Philips
Translator board for Sensormatic
Translator board for Vicon
®
(Burle) controllers
™
controllers
MODELS
SD4-B0 Indoor dome system, black, smoked bubble, NTSC
SD4-B1 Indoor dome system, black, clear bubble, NTSC
SD4-B0-X Indoor dome system, black, smoked bubble, PAL
SD4-B1-X Indoor dome system, black, clear bubble, PAL
SD4-W0 Indoor dome system, white, smoked bubble, NTSC
SD4-W1 Indoor dome system, white, clear bubble, NTSC
SD4-W0-X Indoor dome system, white, smoked bubble, PAL
SD4-W1-X Indoor dome system, white, clear bubble, PAL
®
protocol;
C3401M-D (3/09) 5
Before You Begin
PACKAGE CONTENTS
The following diagram shows the box contents. When installing the Spectra Mini dome, refer to this
diagram.
DOME DRIVE
TRANSLATOR
BOARD
COVER
INTERFACE CABLE
AND
RJ45-10 CONNECTOR
SPRING PADDLE FLEX
ASSEMBLY
MACHINE SCREWS,
#8-32 X 3.5-INCH
2 EA.
SELF-TAPPING SCREWS,
3.5-INCH, 1.5-INCH
2 EA.
INSTALLATION MANUAL
OPERATION/PROGRAMMING
Figure 1. Package Components
The following parts, in addition to normal installation tools, are needed but not supplied:
Qty Description
1 Small flashlight for viewing switches
1 Long-handled flat-blade screwdriver (for setting switches)
2 Toggle bolts, 6-32 (for surface mount installation)
2 Studs and nuts, 8-32 (for surface mount installation to concrete)
TRIM RING AND BUBBLE
MANUAL
6 C3401M-D (3/09)
SWITCH SETTINGS
Coaxitron control: If you are going to use Coaxitron protocol to communicate with the dome system, you
do not have to set any switches. Proceed to the installation instructions that follow this section.
Non-Pelco control: If you are going to install a protocol translator board to communicate with the dome
system through a non-Pelco controller, proceed to the installation instructions that follow this section.
When you are instructed to install the translator board, you will set the switches as described in the
installation/operation manual that accompanies the translator board.
Pelco D or Pelco P control: If you are going to use Pelco D or Pelco P protocol to communicate with the
dome system, follow the steps below to set the switches (refer to Figure 10).
WARNING: Do not remove the dome liner (refer to Figure 2). Replacing the dome liner requires
qualified service personnel; otherwise, the dome drive may not operate properly.
1. Place the dome drive on a flat surface with the dome liner pointing up.
2. Point the camera straight up.
3. Using a flashlight, look straight down through the viewing slot of the dome liner. Look at the circuit
board in the bottom of the housing. Rotate the dome liner until you see two DIP switches on the
circuit board.
4. Set the switches (refer to Table A and Table B on page 8 and Table C on page 9). There are no
settings for SW1.
NOTE: The unit automatically detects Pelco D or Pelco P protocol.
ON
SW 3
ON
2
SW
Figure 2. Switch Location
C3401M-D (3/09) 7
Tab le A . Switch Settings for SW2
Special Systems
Switch Number SW2-1 SW2-2 SW2-3 SW2-4 SW2-5 SW2-6 SW2-7 SW2-8 SW2-9
AD-32 Preset System ON
CM9502 Setting ON
Baud Rate
Switch Number SW2-1 SW2-2 SW2-3 SW2-4 SW2-5 SW2-6 SW2-7 SW2-8 SW2-9
2400 Baud OFF OFF OFF
4800 Baud ON OFF OFF
9600 Baud OFF ON OFF
Protocol Termination
Switch Number SW2-1 SW2-2 SW2-3 SW2-4 SW2-5 SW2-6 SW2-7 SW2-8 SW2-9
Terminated ON*
Not Terminated OFF*
*If you are connecting a single dome to a controller, terminate the dome. When connecting more than one
dome to a single controller, terminate the dome farthest from the controller.
Table B. Switch Settings for SW3: Pelco P-Type Control
SPECTRA
ADDRESS
SW3-1 SW3-2 SW3-3 SW3-4 SW3-5
1 OFF OFF OFF OFF OFF
2 ON OFF OFF OFF OFF
3 OFF ON OFF OFF OFF
4 ON ON OFF OFF OFF
5 OFF OFF O N OFF OFF
6 ON OFF ON OFF OFF
7 OFF ON ON OFF OFF
8 ON ON ON OFF OFF
9 OFF OFF OFF ON OFF
10 ON OFF OFF ON OFF
11 OFF ON OFF ON OFF
12 ON ON OFF ON OFF
13 OFF OFF ON ON OFF
14 ON OFF ON ON OFF
15 OFFONONONOFF
16 ON ON ON ON OFF
SWITCH SETTING
SPECTRA
ADDRESS
SW3-1 SW3-2 SW3-3 SW3-4 SW3-5
17 OFF OFF OFF OFF ON
18 ON OFF OFF OFF ON
19 OFF ON OFF OFF ON
20 ON ON OFF OFF ON
21 OFF OFF ON OFF ON
22 ON OFF ON OFF ON
23 OFF ON ON OFF ON
24 ON ON ON OFF ON
25 OFF OFF OFF ON ON
26 ON OFF OFF ON ON
27 OFF ON OFF ON ON
28 ON ON OFF ON ON
29 OFF OFF ON ON ON
30 ON OFF ON ON ON
31 OFFONONONON
32 ON ON ON ON ON
SWITCH SETTING
8 C3401M-D (3/09)
Table C. Switch Settings for SW3: Pelco D-Type Control (1 of 7)
SPECTRA
ADDRESS
1 ON OFF OFF OFF OFF OFF OFF OFF
2 OFF ON OFF OFF OFF OFF OFF OFF
3 ON ON OFF OFF OFF OFF OFF OFF
4 OFF OFF ON OFF OFF OFF OFF OFF
5 ON OFF ON OFF OFF OFF OFF OFF
6 OFF ON ON OFF OFF OFF OFF OFF
7 ON ON ON OFF OFF OFF OFF OFF
8 OFF OFF OFF ON OFF OFF OFF OFF
9 ON OFF OFF ON OFF OFF OFF OFF
10 OFF ON OFF ON OFF OFF OFF OFF
11 ON ON OFF ON OFF OFF OFF OFF
12 OFF OFF ON ON OFF OFF OFF OFF
13 ON OFF ON ON OFF OFF OFF OFF
14 OFF ON ON ON OFF OFF OFF OFF
15 ON ON ON ON OFF OFF OFF OFF
16 OFF OFF OFF OFF ON OFF OFF OFF
17 ON OFF OFF OFF ON OFF OFF OFF
18 OFF ON OFF OFF ON OFF OFF OFF
19 ON ON OFF OFF ON OFF OFF OFF
20 OFF OFF ON OFF ON OFF OFF OFF
21 ON OFF ON OFF ON OFF OFF OFF
22 OFF ON ON OFF ON OFF OFF OFF
23 ON ON ON OFF ON OFF OFF OFF
24 OFF OFF OFF ON ON OFF OFF OFF
25 ON OFF OFF ON ON OFF OFF OFF
26 OFF ON OFF ON ON OFF OFF OFF
27 ON ON OFF ON ON OFF OFF OFF
28 OFF OFF ON ON ON OFF OFF OFF
29 ON OFF ON ON ON OFF OFF OFF
30 OFF ON ON ON ON OFF OFF OFF
31 ON ON ON ON ON OFF OFF OFF
32 OFF OFF OFF OFF OFF ON OFF OFF
33 ON OFF OFF OFF OFF ON OFF OFF
34 OFF ON OFF OFF OFF ON OFF OFF
35 ON ON OFF OFF OFF ON OFF OFF
36 OFF OFF ON OFF OFF ON OFF OFF
37 ON OFF ON OFF OFF ON OFF OFF
38 OFF ON ON OFF OFF ON OFF OFF
SW3-1 SW3-2 SW3-3 SW3-4 SW3-5 SW3-6 SW3-7 SW3-8
SWITCH SETTING
C3401M-D (3/09) 9
Loading...