Pelco CM400, S-CM400-P Specsheet
PRODUCT SPECIFICATION
CM400 Mount
CORNER MOUNT, SPECTRA® AND LEGACY® ADAPTER
camera solutions
Product Features
• Low Cost
• Rugged Construction
• Supports up to 75 Pounds (34 kg)
• Corner Mount Adapter for Spectra® and Legacy® Wall Mounts
(IWM Series, IDM4018, and LWM41)
• Design Includes Mounting Studs for Quick, Simple, Installation of
Wall Mount
The
CM400
is a corner mount adapter designed for use with Spectra
and Legacy® wall mounts. For Spectra, DF5, or DF8 Series pendant
domes, use the IWM Series or IDM4018 wall mount. For Legacy
positioning systems, use the LWM41 wall mount.
The LWM41, IWM Series, or IDM4018 wall mount is secured to the
CM400
by four 5/16-inch mounting studs; nuts and split lock washers
are supplied.
Constructed from aluminum, the
CM400
is capable of supporting up
to 75 pounds (34 kg) and features a cable feedthrough hole for easy
routing of video and power cables. A block-off plate is included for
non-feedthrough outdoor applications.
®
7.00
(17.78)
4.50
(11.43)
6.50
(16.5)
12.00
(30.84)
4.50
(11.43)
8.00
(20.32)
(5.08)
6.75
(17.15)
2.00
8.00
(20.32)
C281 / REVISED 10-03
.37 (.94) THRU 8X
NOTE: VALUES IN PARENTHESES ARE CENTIMETERS;
ALL OTHERS ARE INCHES.
International Standards
Organization Registered Firm;
ISO 9001 Quality System
.625
(1.59)
TECHNICAL SPECIFICATIONS
MODEL
CM400 Corner mount adapter for IWM Series,
RELATED PRODUCTS
IWM Series Wall mount with cable feedthrough for use
IDM4018 Wall mount with removable front end cap and
LWM41 Legacy® wall mount. For use with Legacy
EA4348 EWM adapter plate. Allows an EWM wall
MECHANICAL
Adapter Mounting Four 5/16-inch mounting studs (nuts and split
Mounting Method Secure with eight fasteners suitable for
IDM4018, and LWM41 wall mounts
®
with Spectra
, DF5, and DF8 Series pendant
style domes.
cable feedthrough for use with Spectra, DF5,
and DF8 Series pendant style domes.
integrated positioning systems.
mount to be installed on a CM400 for use with
an Esprit® Series integrated positioning
system.
lock washers supplied) for attaching LWM41,
IDM4018, EA4348, or IWM Series mount
mounting surface (minimum 1/4-inch
recommended, not supplied)
GENERAL
Construction 6061 T6 aluminum,
Finish Gray polyester powder coat
Maximum Load 75 lb (34 kg)
Unit Weight 3 lb (1.36 kg)
Shipping Weight 8 lb (3.62 kg)
0.125-inch (3.18mm) thick
Pelco, Inc. Worldwide Headquarters:
3500 Pelco Way, Clovis, California 93612-5699 USA
USA & Canada
International
www.pelco.com
Tel: (800) 289-9100 • FAX: (800) 289-9150
Tel: +1 (559) 292-1981 • FAX: +1 (559) 348-1120
Pelco, the Pelco logo, Esprit, Legacy, and Spectra are registered trademarks of Pelco, Inc.
Product specifications and availability subject to change without notice.
©Copyright 2003. Pelco, Inc. All rights reserved.
Loading...