IP Surveillance
Installation Guide
SRXV-WMS
Wall-mount Bracket
C6689M
For cabling and conguration details with each network camera, please refer to their
documentation.
Refer to the table below for the description of the included screws:
Screw Description Quantity Applies to
M4X10 Phillips pan head 4 All camera
mounting holes
M4X25XD9 Phillips pan
head
Plastic anchors 4 Securing the
4 Securing the
bracket to wall
bracket to wall
Dimensions
2
Installation
Mounting Hole Denitions
NOTE: You may need tools like hammer,
chisel, or a at-bade screwdriver to remove
the knock-out tab on the secondary routing
hole.
Above are the locations of different groups of mounting holes for matching different
cameras:
Hole Type Applicable Cameras Screw No. of screws
C
E
F
G
IMV Series
ITV Series
IJV Series
IFV Series
M4X10 3
M4X10
3
4
English
NOTE:
1. It is presumed that this wall-mount bracket is installed with a hole drilled on the wall for
routing power lines, DI/DO, and Ethernet cables.
2. Route cables before you secure the wall-mount bracket to a wall.
3. For details on the cable connections with each camera, please refer to their Quick
Installation Guide.
3
Loading...